CDCASA Power Lift Recliner Chair User Manual

Introduction

Thank you for choosing the CDCASA Power Lift Recliner Chair. This chair is designed to provide ultimate comfort and convenience, featuring power lift assistance, massage, heating functions, and integrated charging ports. Please read this manual thoroughly before assembly and operation to ensure safe and proper use of your new recliner.

Important Safety Instructions

• Always ensure the power cord is not pinched or damaged.
• Keep children and pets away from the chair's moving parts.
• Do not allow children to play on or operate the chair.
• Avoid placing hands or feet near the lifting mechanism during operation.
• Do not use the chair if any part is damaged or malfunctioning. Contact customer support immediately.
• Unplug the chair from the power outlet before cleaning or maintenance.
• Ensure the chair is placed on a level surface to prevent tipping.
• Do not exceed the maximum weight capacity of 350 LBS.
• Use only the provided power adapter and cables.

Package Contents

Your CDCASA Power Lift Recliner Chair is shipped in two boxes. Please verify that all components are present before beginning assembly.

• Recliner Base (Box 1)
• Backrest (Box 1)
• Left Armrest (Box 2)
• Right Armrest (Box 2)
• Power Adapter
• Power Cord
• Remote Control for Massage and Heat
• User Manual (this document)
• Anti-tip support feet and screws

Figure 1: Product dimensions and packaging details. The chair is delivered in two separate boxes.

Setup and Assembly

Assembly of your CDCASA Power Lift Recliner Chair is designed to be straightforward and typically takes 10-15 minutes with no additional tools required. Follow these steps:

1. Unpack Components: Carefully remove all parts from both boxes and lay them out on a clean, soft surface to prevent damage.
2. Attach Backrest: Slide the backrest onto the metal posts located on the recliner base until it clicks securely into place. Ensure a firm connection.
3. Attach Armrests: Slide each armrest onto its corresponding side of the chair base. Ensure the metal brackets align and lock into place. The armrest with the control panel should be on the right side when facing the chair.
4. Connect Cables: Locate the various cables extending from the backrest and base. Connect the corresponding color-coded cables (e.g., red to red, white to white) for the massage and heating functions. Connect the main power cable from the chair to the power adapter.
5. Install Anti-Tip Feet: Attach the anti-tip support feet to the rear of the chair's base using the provided screws and nuts. This enhances stability and safety.
6. Connect to Power: Plug the power adapter into a standard wall outlet.

For a visual guide, please refer to the assembly video below:

Operating Instructions

Power Lift and Recline Functions

The chair features an easy-to-use control panel located on the right armrest. This panel controls the recline and lift functions, as well as the integrated USB and Type-C charging ports.

• Recline Button: Press and hold the "Recline" button to slowly lower the backrest and raise the footrest, allowing you to find your desired reclining position, up to 160 degrees.
• Lift Button: Press and hold the "Lift" button to gradually raise the chair, assisting you in standing up easily. This feature is particularly beneficial for individuals with mobility challenges.
• USB & Type-C Ports: Located on the control panel, these ports allow you to charge low-power devices such as mobile phones and tablets while relaxing in the chair.

Figure 2: Control panel functions for recline, lift, and charging ports.

Figure 3: The power lift feature gently raises the chair to assist users in standing up.

Massage and Heating Functions

The recliner includes a remote control for activating and customizing the massage and lumbar heating features.

• Massage Points: The chair offers 8 vibration massage points targeting the back, lumbar, thighs, and legs.
• Vibration Modes: Choose from 5 different vibration modes and 4 custom area settings for a personalized massage experience.
• Lumbar Heating: Activate the lumbar heating function for soothing warmth to the lower back area.
• Timer: Use the remote control to set a timed duration for the massage and heating functions.

Figure 4: Overview of massage points and remote control for massage and heating.

Maintenance

• Cleaning: Spot clean the chenille fabric with a damp cloth and mild detergent. Avoid harsh chemicals or abrasive cleaners.
• Regular Inspection: Periodically check all connections and moving parts for any signs of wear or looseness. Tighten screws if necessary.
• Power Cord Care: Ensure the power cord is not tangled, twisted, or placed under heavy objects.
• Storage: If storing the chair for an extended period, unplug it from the power outlet and store it in a dry, cool place.

Troubleshooting

If you encounter issues not listed here or if solutions do not resolve the problem, please contact CDCASA customer support for assistance.

Specifications

Figure 5: The CDCASA Power Lift Recliner Chair in its upright position.

Figure 6: Detailed view of convenient features like side pockets, cup holders, and charging ports.

Figure 7: Close-up of the soft and durable chenille fabric.

Warranty and Support

CDCASA is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.

For technical support, troubleshooting assistance, or to inquire about warranty information, please contact CDCASA customer service through the retailer where you purchased the product or visit the official CDCASA brand store online.

Online Brand Store: CDCASA Store on Amazon