1. Introduction
This manual provides essential information for the safe and effective use of your BoxWave Wall Charger Direct (15W). This charger is designed to provide rapid and reliable power to your USB Type-C compatible devices, such as the Voice Caddie Swing Caddie SC4, with its integrated 6-foot cable.
Image: The BoxWave Wall Charger Direct (15W) shown alongside a Voice Caddie Swing Caddie SC4 device, illustrating its intended use for charging compatible electronics.
2. Key Features
- Tailored Compatibility: Specifically designed for USB Type-C devices, ensuring full compatibility and efficient charging.
- 15W Rapid Charge: Delivers 15 watts of power for safe and quick charging, minimizing downtime for your device.
- Economical Solution: Offers performance comparable to or exceeding original chargers at a cost-effective price.
- Universal Voltage Support: Adaptive circuitry supports North American and international voltage standards (100-240V), making it suitable for travel.
- Built-in 6ft Cable: Features an integrated 6-foot (1.8 meter) cable, eliminating loose connections and providing ample reach for convenient charging.
- Reinforced Strain Relief: Designed with rubberized connectors to prevent kinking and tearing, enhancing durability and longevity.
Image: A detailed view of the BoxWave Wall Charger Direct, highlighting its integrated USB Type-C cable, which ensures a secure and hassle-free connection.
Image: A smartphone connected to the BoxWave charger, showing a fast charging indicator and 95% battery, demonstrating the 15W rapid charging capability.
Image: The BoxWave charger plugged into a wall outlet, with its 6-foot cable extending across a room to a device on a sofa, illustrating the freedom of movement it provides.
Image: A close-up of the cable's connection point to the charger, highlighting the reinforced strain relief designed to prevent damage from bending and pulling.
3. Setup
The BoxWave Wall Charger Direct (15W) is designed for immediate use with minimal setup required.
- Unpack: Carefully remove the charger from its packaging.
- Inspect: Before first use, inspect the charger and cable for any visible damage. Do not use if damaged.
- Plug In: Insert the charger's prongs into a standard wall electrical outlet (100-240V AC).
4. Operating Instructions
To charge your device using the BoxWave Wall Charger Direct (15W):
- Ensure the charger is securely plugged into a live wall outlet.
- Connect the USB Type-C end of the charger's built-in cable to the charging port of your compatible device.
- Your device should indicate that it is charging. The 15W output will provide rapid charging for supported devices.
- Once charging is complete, disconnect the cable from your device and unplug the charger from the wall outlet.
5. Maintenance
Proper care will ensure the longevity and optimal performance of your charger:
- Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Handling: Avoid bending or kinking the cable excessively, especially near the connectors, to prevent internal damage. Do not pull the cable to unplug the charger from the wall; always grasp the charger body.
- Environment: Keep the charger away from water, moisture, and highly humid environments.
6. Troubleshooting
If you encounter issues with your BoxWave Wall Charger Direct (15W), refer to the table below for common problems and solutions.
| Issue | Solution |
|---|---|
| Device is not charging. | Ensure the charger is securely plugged into a working wall outlet. Verify the USB Type-C cable is firmly connected to your device's charging port. Try a different wall outlet to rule out power supply issues. |
| Charging is slow. | Confirm your device supports 15W fast charging. Some devices may limit charging speed based on battery level or temperature. Ensure no other high-power devices are connected to the same electrical circuit, which could reduce available power. |
| Charger feels warm during use. | It is normal for chargers to become warm during operation, especially during rapid charging. If the charger becomes excessively hot or emits smoke/odor, immediately unplug it and discontinue use. |
| Cable appears damaged. | If the cable insulation is frayed, cut, or the connectors are bent, discontinue use immediately. Do not attempt to repair. Contact support for assistance. |
7. Specifications
| Attribute | Detail |
|---|---|
| Model Number | BW-WCD |
| Input Voltage | 100-240V AC, 50/60Hz |
| Output Power | 15W (5V/3A) |
| Cable Length | 6 feet (approx. 1.8 meters) |
| Connector Type | USB Type-C (built-in) |
| Item Weight | 3.3 ounces (approx. 93.5 grams) |
| Manufacturer | BoxWave |
| Country of Origin | China |
8. Warranty Information
For specific warranty details and terms, please refer to the documentation included with your purchase or visit the official BoxWave website. This product is typically covered by a manufacturer's warranty against defects in materials and workmanship. Additionally, a 30-day return policy may apply from the point of purchase.
9. Support
If you require technical assistance or have questions regarding your BoxWave Wall Charger Direct (15W), please contact BoxWave Corporation directly. Limited 3rd party technical support for your device (up to 3 inquiries via messaging) may be available, as indicated at the time of purchase. Please note that this support is not affiliated with or endorsed by Voice Caddie.
For the most up-to-date support information, including FAQs and contact methods, please visit the official BoxWave website or refer to your purchase receipt for seller contact details.
