1. Introduction
This manual provides instructions for the BoxWave AccuPoint Active Stylus, designed for use with the Xiaomi Redmi Pad. The AccuPoint Active Stylus offers a precise and natural writing and drawing experience on your device's touchscreen.
Please read this manual thoroughly before using your stylus to ensure proper operation and to maximize its lifespan.
Image 1.1: The BoxWave AccuPoint Active Stylus shown alongside a Xiaomi Redmi Pad tablet.
2. Package Contents
Verify that all items are present in your package:
- BoxWave AccuPoint Active Stylus (2 units)
- Micro USB Charging Cable
Image 2.1: Two BoxWave AccuPoint Active Stylus pens, typically included in a 2-pack.
3. Product Overview
Familiarize yourself with the components of your AccuPoint Active Stylus:
Image 3.1: Labeled diagram of the stylus showing the Removable FiberMesh Tip, Hidden Micro USB Charging Port, Easy-On Button, LED Power Indicator, Fingerprint Proof Brushed Aluminum Barrel, 9mm Ergonomic Grip, and Accupoint 1.9mm Tip.
- AccuPoint 1.9mm Tip: The fine tip for precise interaction with the screen.
- Fingerprint Proof Brushed Aluminum Barrel: Durable and comfortable grip.
- Easy-On Button: Powers the stylus on and off.
- LED Power Indicator: Shows the stylus's power status.
- Hidden Micro USB Charging Port: For recharging the internal battery.
- Removable FiberMesh Tip: An alternative tip for general navigation.
Image 3.2: A detailed view highlighting the Metal Capacitive Tip (AccuPoint tip), Micro USB Charging Port, and the FiberMesh Tip.
4. Setup
4.1 Charging the Stylus
- Locate the hidden Micro USB charging port on the stylus.
- Connect the included Micro USB cable to the stylus and to a compatible USB power source (e.g., computer USB port, wall adapter).
- The LED power indicator will illuminate during charging. A full charge provides approximately 12 hours of use.
Image 4.1: The stylus connected to a Micro USB charging cable, indicating it is being recharged.
4.2 Powering On/Off
- To turn on the stylus, press the Easy-On Button. The LED indicator will light up.
- To turn off the stylus, press the Easy-On Button again. The LED indicator will turn off.
Note: The AccuPoint Active Stylus does not require Bluetooth pairing with your Xiaomi Redmi Pad. It operates by emitting electronic pulses to interact with the touchscreen.
5. Operating Instructions
5.1 Using the AccuPoint Tip
- Ensure the stylus is powered on (LED indicator should be lit).
- Gently touch the AccuPoint 1.9mm tip to your Xiaomi Redmi Pad screen.
- Apply light pressure, similar to using a traditional pen on paper, to draw, write, tap, or swipe.
Image 5.1: A hand demonstrating the use of the AccuPoint Active Stylus for drawing on a tablet screen.
Image 5.2: A close-up view of the stylus tip making contact with the tablet screen, illustrating precise input.
5.2 Using the FiberMesh Tip
The removable FiberMesh tip can be used for general navigation, scrolling, and tapping, similar to a standard capacitive stylus. It does not require the stylus to be powered on.
Important Considerations:
- The AccuPoint Active Stylus does not support palm rejection. Avoid resting your palm on the screen while using the stylus if your application does not have its own palm rejection feature.
- The stylus does not support pressure sensitivity. All strokes will have a uniform thickness unless adjusted within the application you are using.
6. Maintenance
- Cleaning: Wipe the stylus barrel with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Tip Care: The AccuPoint tip is delicate. Avoid dropping the stylus or applying excessive force to the tip.
- Storage: Store the stylus in a cool, dry place away from direct sunlight and extreme temperatures.
- Charging: Recharge the stylus when the LED indicator shows low power or when performance degrades. Avoid fully depleting the battery frequently.
7. Troubleshooting
| Problem | Solution |
|---|---|
| Stylus not responding on screen. |
|
| LED indicator not lighting up. |
|
| Inaccurate or inconsistent input. |
|
8. Specifications
- Model: AccuPoint Active Stylus
- Brand: BoxWave
- Compatibility: Xiaomi Redmi Pad
- Tip Size: 1.9mm (AccuPoint)
- Battery Life: Up to 12 hours of continuous use
- Charging Port: Micro USB
- Material: Brushed Aluminum
- Weight: Approximately 2.7 ounces
Image 8.1: The AccuPoint Active Stylus resting on a tablet, showcasing its sleek design and compact size.
9. Warranty and Support
BoxWave provides limited third-party technical support for the AccuPoint Active Stylus. This includes up to 3 inquiries via electronic messaging.
For further assistance or warranty information, please refer to the contact details provided with your purchase or visit the official BoxWave website.
Please note: Xiaomi Redmi Pad device is not included with the stylus purchase and BoxWave is not affiliated with or endorsed by Xiaomi.
