Introduction
This manual provides essential information for the safe and effective use of your Monster Jam Bumper Car for Kids. Please read all instructions carefully before assembly and operation. Retain this manual for future reference.
Safety Information
WARNING: Use as Directed. Adult supervision is required at all times during operation of this product. Failure to follow safety instructions may result in serious injury.
- Ensure the child is within the recommended age range of 36 months to 6 years and does not exceed the maximum weight capacity of 66 lbs.
- Always use the safety seat belt provided.
- Operate the bumper car on flat, clear surfaces, free from obstacles, water, or steep inclines.
- Do not allow children to operate the vehicle near streets, swimming pools, or other hazardous areas.
- Keep hands, hair, and clothing away from moving parts.
Product Overview & Package Contents
The Monster Jam Bumper Car is an electric ride-on toy designed for young children, featuring 360-degree spin capabilities, LED lights, and a musical steering wheel. It can be controlled by the child or via a wireless remote control by an adult.
What's in the Box:
- 1 x Monster Jam Bumper Car
- 1 x Wireless Remote Control
- 1 x Wall Charger
Image: Top-down view of the Monster Jam Bumper Car, showcasing its black body with green flame decals, red headlights, and a green handle/steering wheel.
Setup
Initial Charging
Before first use, fully charge the bumper car's 12V rechargeable battery. Connect the wall charger to the charging port on the vehicle and plug it into a standard electrical outlet. The charging indicator light will typically change color or turn off when charging is complete. Refer to the charger's specific instructions for charging times, usually several hours for a full charge.
Assembly
The bumper car requires minimal assembly. Ensure the steering wheel is securely attached and any necessary battery connections are made according to the diagrams in the included quick start guide. Verify all components are firmly in place before allowing a child to use the vehicle.
Image: Top-down view of the bumper car's interior, showing the green steering wheel, power switch, charging port, and safety seat belt. This view illustrates the control layout after assembly.
Operating Instructions
Powering On/Off
Locate the power switch on the bumper car, typically near the seat or control panel. Press the switch to the 'ON' position to power on the vehicle. Press it to the 'OFF' position to power off.
Child Operation
- Seat Belt: Ensure the child is securely fastened with the easy-click seat belt.
- Foot Pedal: The bumper car is operated by a foot pedal. Press the pedal to move the car. Release the pedal to brake.
- Steering Wheel: The steering wheel primarily activates musical features and lights. Directional control is achieved through the foot pedal and the 360-degree spin function.
Image: Close-up view of the easy-click seat belt mechanism within the bumper car's seat, highlighting its design for secure fastening.
Remote Control Operation (Adult Supervision)
The wireless remote control allows an adult to safely guide the bumper car. It typically features controls for:
- Forward/Reverse: Controls the direction of movement.
- Speed Adjustment: Switches between two available speed modes (e.g., low and high).
- 360-Degree Spin: Activates the spin function.
- Emergency Brake: Stops the vehicle immediately.
- LED Lighting: Adjusts or activates the multi-color LED lights.
Special Features
- 360-Degree Spin: Engage this feature for dynamic play. Refer to the remote control or vehicle controls for activation.
- Multi-Color LED Lights: The bumper car is equipped with vibrant LED lights for enhanced visibility and fun.
- Musical Steering Wheel: The steering wheel includes buttons that activate various musical sounds.
Image: Rear view of the Monster Jam Bumper Car, highlighting the green steering wheel with musical notes floating around it, indicating its sound features.
Maintenance
Cleaning
Wipe the bumper car's sturdy plastic shell with a damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish or electronic components. Do not submerge the vehicle in water.
Battery Care
- Recharge the battery after each use to prolong its lifespan.
- Do not overcharge the battery. Disconnect the charger once the battery is full.
- If storing the bumper car for an extended period, charge the battery fully every 3 months to prevent deep discharge.
- Do not attempt to replace the battery with a non-approved type. Contact customer support for battery replacement.
Storage
Store the bumper car in a dry, cool place away from direct sunlight and extreme temperatures. Protect it from dust and moisture. Ensure the power is turned off before storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bumper car does not move. | Battery is low or not charged. Power switch is off. Loose battery connection. | Charge the battery fully. Ensure power switch is ON. Check battery connections. |
| Remote control not responding. | Remote control batteries are dead. Remote is not paired. | Replace remote control batteries. Refer to quick start guide for pairing instructions. |
| Lights or sounds not working. | Low battery. Wiring issue. | Charge the bumper car battery. If problem persists, contact customer support. |
| Car moves slowly or intermittently. | Low battery. Overload (exceeding weight limit). Operating on uneven surface. | Recharge battery. Ensure child's weight is within limits. Operate on flat, smooth surfaces. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | A6V02138-GNFM-STK-1 |
| Product Dimensions | 20 x 25 x 16 inches |
| Item Weight | 19.06 pounds |
| Recommended Age | 36 months - 6 years |
| Maximum Weight Capacity | 66 lbs |
| Motor | Two 6V motors |
| Battery | 12V rechargeable battery |
| Manufacturer | Sakar International |
Warranty and Support
This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact the manufacturer, Sakar International, or the retailer where the product was purchased. Contact information can typically be found on the product packaging or the manufacturer's official website.
