Product Overview
The PPLEE RGB Vibrating Alarm Clock (Model CR1008iR) is designed to provide a reliable and versatile wake-up experience. It features a large digital display with customizable RGB colors, multiple alarm modes including a powerful bed shaker, and convenient charging ports. This manual provides instructions for setup, operation, and maintenance.
Image: The PPLEE RGB Vibrating Alarm Clock with its bed shaker unit, showcasing its features like RGB display, vibrator, night light, adjustable brightness, dual chargers, snooze, and 12/24H format.
Setup
1. Power Connection
Connect the provided power adapter to the DC IN port on the back of the alarm clock and plug it into a standard 100-240V AC outlet. The clock display will illuminate.
2. Battery Backup Installation
For backup functionality during power outages, insert 2 AAA batteries (not included) into the battery compartment on the bottom of the clock. These batteries preserve time and alarm settings and activate the alarm during power loss, but do not power the display or charging ports.
Image: The alarm clock connected to AC power, with an illustration of the battery compartment for 2 AAA batteries (not included) for backup functionality.
3. Bed Shaker Connection
Plug the bed shaker unit into the designated port on the back of the alarm clock. Place the bed shaker under your pillow or mattress for effective vibration.
4. Setting Time
- Press the 'SET TIME' button. The display will start flashing.
- Press the 'HOUR' and 'MIN' buttons to adjust the time.
- Press 'SET TIME' again to save, or wait 5 seconds for automatic confirmation.
Video: An official product video demonstrating the PPLEE RGB Vibrating Alarm Clock for Bedroom with Bed Shaker, including how to set the time and alarm.
5. Setting Alarm
- Switch the 'ALARM' button towards the left 'ON' side.
- Press the 'SET ALARM' button. The alarm indicator will light up, and the display starts flashing.
- Then press 'HOUR' and 'MIN' buttons to set the alarm time.
- Press 'SET ALARM' again to save, or wait 5 seconds for automatic confirmation.
Operating Instructions
1. Alarm Modes
The alarm clock offers three wake-up modes:
- Vibration Only: The bed shaker activates without sound.
- Buzzer Only: The audible alarm sounds.
- Vibrate/Buzz Combo: Both the bed shaker and audible alarm activate simultaneously.
Select your preferred mode using the 'BUZZ/VIB' switch on the back of the unit.
Image: Visual representation of the three alarm modes: wake up only by bed shaker, wake up only by buzzer sound, and wake up by both bed shaker and buzzer sound.
2. Display Brightness
Adjust the 7-level screen brightness (0%-100%) using the 'DIMMER' button on the back of the clock to suit your preference, day or night.
Image: The alarm clock display demonstrating various brightness levels, from 0% (dimmest) to 100% (brightest).
3. RGB Color Modes for Display
The digital display offers 10 dynamic RGB color modes, including 6 static colors and 4 dynamic options. Cycle through these options to personalize the clock's appearance.
Image: A collection of alarm clock displays showcasing 10 different RGB color modes, including static and dynamic options.
4. Night Light Modes
The clock features an 8-mode/7-color night light with 3 adjustable brightness settings. Activate and cycle through the night light options by pressing the 'SNOOZE-LIGHT' bar on top of the clock.
Image: The alarm clock with its night light feature active, displaying different color modes and illustrating its use as an ambient light source.
5. Snooze Function
When the alarm sounds, press the large 'SNOOZE-LIGHT' bar on top of the clock to activate a 9-minute snooze. The alarm will temporarily pause and resume after 9 minutes.
Image: A person reaching to press the large 'SNOOZE-LIGHT' bar on the alarm clock, indicating the easy-to-use snooze function.
6. 12/24 Hour Format
To switch between 12-hour and 24-hour time formats, press and hold the 'SET TIME' button for 2 seconds. The default setting is 12-hour format.
7. Daylight Saving Time (DST)
The clock supports Daylight Saving Time. Refer to the specific instructions in the full manual for activating or deactivating DST mode.
8. USB and Type-C Charging Ports
The alarm clock is equipped with one USB output port and one Type-C output port on the back. These ports can be used to charge compatible electronic devices.
Image: The alarm clock displaying its dual output ports (USB and Type-C) with smartphones connected and charging, highlighting its convenience.
Maintenance
1. Cleaning
To clean the alarm clock, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.
2. Battery Replacement
If the clock experiences frequent power outages or if the backup function is not working, replace the 2 AAA batteries in the battery compartment. Ensure correct polarity when inserting new batteries.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is off or flickering. | No AC power; loose power connection. | Ensure the power adapter is securely plugged into the clock and a working outlet. |
| Alarm does not sound/vibrate. | Alarm is off; incorrect alarm mode selected; volume too low; bed shaker not connected. | Verify the alarm is set to ON. Check the 'BUZZ/VIB' switch for the desired mode. Adjust alarm volume. Ensure bed shaker is connected. |
| Time/settings lost after power outage. | No backup batteries; dead backup batteries. | Install or replace 2 AAA backup batteries. |
| USB/Type-C charging not working. | Clock not connected to AC power; device incompatible; cable faulty. | Ensure the clock is connected to AC power. Verify device compatibility and try a different charging cable. |
Specifications
- Model: CR1008iR
- Brand: PPLEE
- Display Type: Digital LED
- Display Size: 7.5 inches (digits)
- Display Brightness: 7 levels (0%-100%)
- Display Colors: 10 RGB modes (6 static, 4 dynamic)
- Night Light: 8 modes / 7 colors, 3 adjustable brightness settings
- Alarm Modes: Vibration, Buzzer, or Vibrate/Buzzer Combo
- Buzzer Volume: Up to 110dB, adjustable (Low, Medium, High)
- Bed Shaker Cable Length: 71 inches
- Snooze Duration: 9 minutes
- Time Format: 12H/24H selectable
- Power Source: Corded Electric (AC 100-240V)
- Battery Backup: 2 x AAA batteries (not included) for settings and alarm during power outage
- Charging Ports: 1 x USB-A, 1 x USB-C
- Product Dimensions: 6.46"W x 3.39"H
- Material: Plastic
- Item Weight: 8.8 ounces
Warranty
Please refer to the product packaging or the official PPLEE website for detailed warranty information. Typically, products come with a limited manufacturer's warranty covering defects in materials and workmanship under normal use.
Support
For technical assistance, troubleshooting, or customer service inquiries, please contact PPLEE customer support through the retailer where the product was purchased or visit the official PPLEE website for contact information.
