Introduction
Thank you for choosing the JASIWAY Convertible Sleeper Chair Bed. This versatile furniture piece is designed to function as a comfortable chair, a relaxing chaise lounge, and a convenient sleeper bed, making it ideal for small spaces, bedrooms, and offices. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure optimal use and longevity of your product.
Safety Information
- The maximum weight capacity for this product is 300 pounds. Do not exceed this limit.
- Ensure the product is used on hard, level floors only to maintain stability and prevent tipping.
- Exercise caution when adjusting the backrest to prevent pinching or injury. Keep hands and fingers clear of moving parts.
- Keep children and pets away from the product during assembly and adjustment.
Setup and Assembly
The JASIWAY Convertible Sleeper Chair Bed requires minimal assembly. Follow these steps to set up your chair:
- Attach the Legs: Simply screw the four rubberwood legs into the designated receivers on the bottom of the chair base. Ensure they are tightened securely.
- Install Armrests: Attach the armrests to both sides of the chair using the provided screws.
- Adjustable Backrest Support: Locate the zippers on the back of the chair. Open the zippers and pull out the adjustable support legs for the backrest. These legs can be adjusted to accommodate different ground heights.
For a visual guide, please refer to the assembly video below:
Video: JASIWAY Chair Bed Sleeper Assembly Instructions. This video demonstrates the step-by-step process of assembling the chair bed, including attaching legs and armrests.
Assembly Components
- 4 x Legs (Φ8*40x16 screws)
- 4 x Armrest Screws (Φ8*65x4 screws)
- Hardware (included)
- Throw Pillow (included)
Image: The JASIWAY Convertible Sleeper Chair Bed in its standard chair configuration, showcasing its mid-century design and linen fabric.
Image: Detailed product dimensions of the JASIWAY Sleeper Chair when configured as a chair, including width, depth, and height measurements.
Operating Instructions
The JASIWAY Convertible Sleeper Chair Bed offers three primary configurations: a chair, a chaise lounge, and a sleeper bed. The backrest features 5 adjustable positions to suit your comfort needs.
Converting Between Modes
To convert the chair into a chaise lounge or a sleeper bed, follow these general steps:
- Prepare the Seat: Ensure the seat cushion is clear of any items.
- Adjust the Backrest: Gently push the backrest forward slightly, then lower it to your desired angle. The backrest can be angled from 0 to 85 degrees.
- Extend the Seat: Pull the front part of the seat outwards to extend it into a chaise lounge or fully flat for a sleeper bed. Ensure the hidden support legs are deployed for stability when in chaise or bed mode.
Watch the video below for a demonstration of the conversion process:
Video: JASIWAY Convertible Sleeper Chair Bed for Adults. This video illustrates how to easily convert the chair between its three modes: chair, chaise lounge, and sleeper bed.
Image: A visual representation of the JASIWAY Convertible Sleeper Chair Bed in its three forms: sofa chair, chaise lounge, and sleeper bed.
Image: An animated image showing the 5-position adjustment feature of the backrest, allowing users to find their preferred angle.
Image: A close-up view of the hidden support legs that provide additional stability when the chair is converted into a chaise lounge or bed.
Image: Detailed product dimensions of the JASIWAY Sleeper Chair when fully extended into a bed, showing its length and width.
Maintenance
Proper care will extend the life and appearance of your JASIWAY Convertible Sleeper Chair Bed:
- Cleaning: Wipe clean with a dry cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals.
- Armrest Covers: The armrest covers are washable. Remove them as needed for cleaning to keep the armrests clean and fresh.
- General Care: Avoid direct sunlight to prevent fading. Keep away from heat sources.
Troubleshooting
If you encounter any issues with your JASIWAY Convertible Sleeper Chair Bed, please review the assembly steps and operating instructions. For persistent problems or concerns, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | JASIWAY |
| Model Number | J-P2206Y-091S-BE |
| Product Dimensions (Chair) | 31.5"D x 36.6"W x 32.3"H |
| Reclined Length (Bed) | 76.8 Inches |
| Item Weight | 50 Pounds |
| Weight Limit | 300 Pounds |
| Material Type | Cotton Linen Fabric |
| Frame Material | Metal |
| Furniture Leg Material | Wood (Rubberwood) |
| Fill Material | High Density Foam |
| Adjustable Positions | 5 Position Backrest |
| Assembly Required | Yes |
| Color | Mid-century Beige |
Warranty Information
The JASIWAY Convertible Sleeper Chair Bed comes with a Limited Warranty. For specific details regarding coverage and duration, please refer to the warranty documentation included with your purchase or contact JASIWAY customer support.
Optional protection plans may be available for purchase, such as 3-Year Protection Plan or Complete Protect, offering extended coverage.
Support
For further assistance, product inquiries, or to report any issues, please contact JASIWAY customer support. You can also visit the official JASIWAY store on Amazon for more information and resources:
The seller for this product is MuRore, who also provides customer support and handles returns within 30 days.
