1. Introduction
This manual provides essential information for the safe and effective use of your FITE ON 5V USB Adapter, designed specifically for VOLUAS automatic pet food dispensers. Please read this manual thoroughly before use and retain it for future reference.
2. Safety Information
To ensure safe operation and prevent damage, observe the following safety guidelines:
- This adapter is UL Listed, indicating it meets recognized safety standards.
- It features Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to prevent damage to the adapter and connected devices.
- Do not expose the adapter to water or excessive moisture.
- Avoid using the adapter if the cable or plug is damaged.
- Ensure the adapter is used with compatible devices only (5V input).
- Unplug the adapter from the wall outlet when not in use for extended periods.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Verify that your package contains the following items:
- 1 x FITE ON Home Wall Charger (5V USB Adapter)
- 1 x USB Power Cord (3.3ft / 1.0m)
4. Setup Instructions
Follow these steps to set up your FITE ON 5V USB Adapter:
- Connect the USB-A end of the provided USB power cord into the USB port on the FITE ON wall charger.
- Connect the other end of the USB power cord (typically a micro-USB or USB-C, depending on your feeder model) into the power input port of your VOLUAS automatic pet feeder.
- Plug the FITE ON wall charger into a standard 100-240VAC wall outlet.
- Ensure the pet feeder powers on, indicating a successful connection.
5. Operating Instructions
The FITE ON 5V USB Adapter operates automatically once connected and plugged into a power source. It provides a stable 5V output to power your compatible VOLUAS automatic pet feeder.
- The adapter is designed for continuous operation, providing consistent power to your pet feeder.
- It is compatible with various VOLUAS automatic pet feeders, including models VL001, VL002, VL003, VL004, VL005, VL006, VL007, VL008, VL009, DY001, and DY002.
6. Maintenance
The FITE ON 5V USB Adapter requires minimal maintenance:
- Keep the adapter and cable clean and free from dust. Use a dry, soft cloth for cleaning.
- Avoid bending or crimping the power cord excessively, as this can damage the internal wires.
- Store the adapter in a cool, dry place when not in use.
7. Troubleshooting
If you encounter issues with your FITE ON 5V USB Adapter, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Pet feeder does not power on. |
|
|
| Adapter feels excessively hot. |
|
|
8. Specifications
- Brand: FITE ON
- Input Voltage: 100-240VAC, 50/60Hz (World Wide Input Voltage)
- Output Voltage: 5 Volts
- Cable Length: 3.3ft / 1.0m
- Connector Type: USB (Type-A for adapter output)
- Safety Features: OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection)
- Certifications: UL Listed
- Compatible Devices: VOLUAS 4L, 5L, 6L Automatic Cat Feeders (Models: VL001, VL002, VL003, VL004, VL005, VL006, VL007, VL008, VL009, DY001, DY002)
9. Contact and Support
For technical support, warranty inquiries, or further assistance, please contact the manufacturer, FITE ON, through your original purchase platform or their official website.
Please note: Specific warranty terms and conditions may vary based on your region and retailer.