Introduction
Thank you for choosing the GAOMON Full Bed Frame with Storage. This manual provides detailed instructions for the assembly, operation, and maintenance of your new bed frame. Please read this manual thoroughly before assembly and retain it for future reference.
Safety Information
Important Safety Warnings:
- Always follow the assembly instructions carefully to prevent instability or collapse.
- Do not exceed the maximum weight recommendation of 500 pounds.
- Be cautious when handling the bed frame components, as they may be heavy and have sharp edges.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as needed.
- Keep small parts away from children during assembly to prevent choking hazards.
Package Contents
Before beginning assembly, verify that all parts are present and undamaged. Refer to the included parts list in your packaging for specific component identification.
- Headboard (Adjustable Tufted)
- Footboard
- Side Rails
- Support Legs
- Wooden Slats
- 4 Storage Drawers (with wheels)
- Assembly Hardware (screws, bolts, Allen wrench, etc.)
- Instruction Manual
Setup and Assembly
Assembly typically requires two adults. Follow the step-by-step instructions provided in the separate assembly guide included with your product. The general steps are outlined below:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Headboard and Footboard: Attach the headboard and footboard to the side rails using the provided hardware. Ensure all connections are secure.
- Install Center Support: Attach the center support beam and legs to the bed frame for added stability.
- Place Slats: Position the wooden slats across the bed frame. Secure them according to the assembly guide to ensure proper mattress support and prevent noise.
- Assemble Drawers: Assemble the four storage drawers. Attach the wheels to the bottom of each drawer.
- Insert Drawers: Slide the assembled drawers under the bed frame. Note that these drawers are designed to roll freely and do not attach to tracks.

Image: Fully assembled GAOMON Full Bed Frame with storage drawers extended.

Image: Detail of the adjustable headboard mechanism.
Operating Instructions
Adjusting the Headboard
The headboard offers two adjustable height settings: 39 inches or 45 inches. To adjust the height, loosen the bolts connecting the headboard to the frame, slide the headboard to your desired height, and then securely re-tighten the bolts. Ensure both sides are adjusted evenly.
Using the Storage Drawers
The bed frame includes four spacious storage drawers. These drawers are designed to roll freely on wheels under the bed. Simply pull them out to access your stored items and push them back in when not in use. There are no tracks, allowing for flexible placement.

Image: Four storage drawers extended from under the bed, showcasing storage capacity.
Maintenance
- Cleaning: The upholstered parts of the bed frame can be spot cleaned with a damp cloth and mild detergent. Avoid harsh chemicals that may damage the linen fabric. For the metal frame, wipe with a dry or slightly damp cloth.
- Hardware Check: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten any loose connections to maintain stability and prevent squeaking.
- Drawer Care: Keep the drawer wheels free of debris to ensure smooth operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly or unstable. | Loose hardware connections. Uneven floor. | Check and tighten all bolts and screws. Ensure the bed is on a level surface. |
| Squeaking noises. | Loose connections. Slats not properly seated. | Re-tighten all hardware. Ensure all wooden slats are correctly positioned and secured. |
| Drawers do not slide smoothly. | Debris in wheels. Damaged wheels. | Clean any debris from the drawer wheels. Inspect wheels for damage; contact support if damaged. |
| Headboard height cannot be adjusted. | Bolts are too tight. Obstruction. | Loosen the headboard bolts sufficiently. Check for any obstructions preventing movement. |

Image: Detail of the noiseless design with solid steel slat support system.
Specifications
- Model: 0826
- Size: Full
- Material: Linen (Upholstery), Metal (Frame), Wood (Slats)
- Product Dimensions (L x W x H): 78" x 56" x 45"
- Adjustable Headboard Heights: 39" or 45"
- Storage: 4 under-bed drawers
- Maximum Weight Recommendation: 500 Pounds
- Assembly Required: Yes
- Color: Grey

Image: Full product dimensions diagram.
Warranty and Support
GAOMON is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, we recommend retaining your proof of purchase for any warranty claims.
If you encounter any difficulties during assembly, have questions about product operation, or require troubleshooting assistance, our professional support team is available to help. Please refer to the contact information provided with your purchase or visit the official GAOMON website for support options.
We highly recommend carefully following the instructions provided during the assembly and installation of the bed frame. Our knowledgeable and friendly team is dedicated to providing reliable support.