AEG TR7T60588
AEG LAVATHERM TR7T60588 Heat Pump Dryer User Manual
Model: TR7T60588
Brand: AEG
Important Safety Information
Please read all instructions carefully before using the appliance. Keep this manual for future reference.
- Always ensure the appliance is unplugged before performing any cleaning or maintenance.
- Do not allow children to play with the appliance. Supervise children when the appliance is in use.
- Ensure adequate ventilation around the dryer during operation.
- Do not install the dryer in areas where the temperature may fall below freezing.
- Keep packaging materials out of reach of children to prevent suffocation hazards.
Product Overview
The AEG LAVATHERM TR7T60588 is an 8kg capacity heat pump dryer designed for efficient and gentle drying of various fabric types. It incorporates advanced technologies to optimize performance and energy efficiency.

Key features include SensiDry technology for gentle and energy-saving drying, and ProSense automatic load sensing which adjusts drying time and energy consumption based on the load size.
Setup and Installation
Unpacking
Carefully remove all packaging materials from the dryer. Inspect the appliance for any signs of damage incurred during transit. Report any damage to your retailer immediately.
Positioning
The AEG LAVATHERM TR7T60588 is a freestanding appliance. Place it on a stable, level surface. The appliance can be installed under a counter with a minimum niche height of 85 cm.
Appliance Dimensions (Height x Width x Depth): 850 mm x 596 mm x 663 mm.
Electrical Connection
Connect the dryer to a properly grounded electrical outlet. The appliance operates at 240 Volts. Ensure the power cable is not pinched or damaged during installation.
Condensate Drainage
The dryer is equipped with a 28-liter condensate container located at the top left. This container collects water extracted from the laundry and must be emptied after each drying cycle. For continuous drainage, the dryer can be connected to an external drain (refer to the detailed plumbing instructions in the complete user manual).
Operating Instructions
Before First Use
Before using the dryer for the first time, wipe the interior of the drum with a damp cloth. Ensure all filters are correctly inserted.
Loading Laundry
Open the door and load laundry into the ProTex gentle drum. Do not exceed the maximum drying capacity of 8 kg. For best results, sort laundry by fabric type and desired dryness level.
Program Selection
Turn the program dial to select the appropriate drying program. The dryer features electronically controlled programs that continuously measure laundry moisture and adjust the drying time accordingly.
Available programs include:
- Bed linen XL
- Cotton ECO
- Cotton
- Delicates
- Duvets
- Easy Iron
- MixDry
- Refresh
- Sportswear
- Synthetics
Starting a Program
Once a program is selected, press the Start/Pause button to begin the drying cycle. The remaining time display will show the estimated duration of the program.
Special Functions
- Delay Start: Allows you to set a specific time for the drying program to begin.
- Extended Anti-Crease: Periodically tumbles the load after the drying cycle completes to minimize creasing.
- Reversing Drum Action: The drum's rotation direction is changed repeatedly throughout the cycle to ensure even and gentle drying.
- Child Lock: Electronically locks the control panel to prevent unintended operation, especially by children.
Maintenance and Care
Cleaning the EcoFlow Filter
The EcoFlow filter indicator will illuminate when the filter requires cleaning. It is recommended to clean the filter after every drying cycle to maintain optimal performance and energy efficiency.
Emptying the Condensate Container
The condensate container indicator will illuminate when the container is full. Empty the 28-liter condensate container after each drying cycle to prevent interruptions.
Cleaning the Heat Exchanger
The heat exchanger indicator will illuminate when cleaning is necessary. Refer to the comprehensive user manual for detailed instructions on how to clean the heat exchanger safely and effectively.
General Cleaning
Wipe the exterior surfaces of the dryer with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
Troubleshooting
This section provides solutions to common issues you may encounter. For problems not listed here or if solutions do not resolve the issue, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dryer does not start. | Power cord not plugged in; door not closed properly; child lock activated. | Check power connection; ensure door is fully closed and latched; deactivate child lock. |
| Drying results are unsatisfactory. | Filter clogged; condensate container full; overloaded drum; incorrect program selected. | Clean EcoFlow filter; empty condensate container; reduce load size; select appropriate program for fabric type. |
| Unusual noise during operation. | Foreign objects in drum; appliance not level. | Check drum for loose items; adjust adjustable feet to ensure the appliance is level. |
| Indicators for filter/container/heat exchanger are on. | Respective component requires cleaning or emptying. | Perform indicated maintenance: clean filter, empty condensate container, or clean heat exchanger. |
Specifications
- Model: TR7T60588
- Brand: AEG
- Type: Heat Pump Dryer
- Drying Capacity: 8 kg
- Dimensions (H x W x D): 850 mm x 596 mm x 663 mm
- Energy Consumption (Standard Program, Cupboard Dry): 1.93 kWh
- Condensation Efficiency Class: B
- Air Acoustic Emission (Drying): 66 dB(A)
- Voltage: 240 Volts
- Condensate Container Capacity: 28 Liters
- Color: White
- Installation Type: Freestanding
- Door Hinge: Right
- Refrigerant: Propane (Climate-friendly)
Warranty and Support
For detailed warranty information, technical support, or service requests, please refer to the warranty card included with your appliance or visit the official AEG website. Ensure you have your model number and serial number ready when contacting support.
What's in the Box: Power Cable.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







