FITE ON USB-C Charger for Tire Inflator (Model: FITE ON-CABLE-XSD-E83) Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and efficient use of your FITE ON USB-C Charger. Please read this manual thoroughly before use and retain it for future reference. This charger is designed to provide power to compatible portable tire inflators and air compressors.

2. Product Overview

2.1 What's in the Box

• 1 x FITE ON USB-C Wall Charger
• 1 x USB Type-C Cable (5ft/1.5m)

2.2 Key Features

• Universal Input Voltage: Supports 100-240VAC 50/60Hz for worldwide compatibility.
• Cable Length: Includes a 5ft (1.5m) USB Type-C cable.
• Safety Protections: Equipped with Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure safe operation.
• Efficient Charging: Designed for efficient power delivery without generating physical noise during operation.
• Wide Compatibility: Compatible with various portable tire inflators and air compressors, including models from Airmoto, Woowind LP1, and Fanttik.

2.3 Product Images

3. Setup

1. Unpack the FITE ON USB-C Charger and the included USB Type-C cable from their packaging.
2. Inspect the charger and cable for any visible signs of damage. Do not use if damaged.
3. Connect the USB Type-C cable to the output port on the FITE ON wall charger. Ensure a firm connection.

4. Operating Instructions

1. Connect the USB Type-C end of the cable to the charging port of your compatible tire inflator or air compressor.
2. Plug the FITE ON charger into a standard wall outlet (100-240VAC, 50/60Hz).
3. Your device should begin charging. Refer to your specific tire inflator's instruction manual for details on charging indicators and expected charging times.
4. Once charging is complete, first disconnect the charger from the wall outlet, then disconnect the USB Type-C cable from your device.

5. Maintenance

• Keep the charger and cable clean and dry. Use a soft, dry cloth for cleaning.
• Avoid exposing the charger to extreme temperatures, high humidity, or direct sunlight.
• Do not attempt to open, modify, or repair the charger. This may void any warranty and poses a safety risk.
• Store the charger and cable in a cool, dry place when not in use.
• Ensure the cable is not bent sharply or tangled, which can cause internal damage.

6. Troubleshooting

6.1 Charger Not Working

• Check Power Outlet: Ensure the wall outlet is functional by testing it with another known working device.
• Cable Connection: Verify that the USB Type-C cable is securely connected to both the charger and your device.
• Device Compatibility: Confirm that your tire inflator or air compressor is designed to charge via a USB-C port.

6.2 Slow Charging

• Clean Ports: Ensure the charging port on your device and the USB-C connector are clean and free of dust or debris.
• Charger Specifications: While this charger is efficient, ensure your device's charging requirements are met.

6.3 Overheating

• If the charger feels excessively hot to the touch, disconnect it immediately from the wall outlet and your device.
• Ensure proper ventilation around the charger and avoid charging in enclosed spaces or under blankets.
• If overheating persists after ensuring proper ventilation, discontinue use and contact customer support.

7. Specifications

8. Warranty and Support

For technical assistance, product support, or inquiries regarding warranty information, please contact FITE ON customer service. You can typically find contact details through your purchase platform or the official FITE ON website.