LasGoo LG-3Dx Laser Level User Manual

1. Introduction

Thank you for choosing the LasGoo LG-3Dx Laser Level. This device is designed to provide precise and efficient leveling for various construction and home improvement tasks. Please read this manual thoroughly before operation to ensure safe and correct usage, and retain it for future reference.

2. Safety Instructions

WARNING: This product emits a Class II laser beam. Avoid direct eye exposure to the laser beam. Do not stare into the beam or view directly with optical instruments.

• Do not attempt to modify or disassemble the laser level.
• Keep the device out of reach of children.
• Use only the specified charging cable and battery.
• Operate the device within the specified temperature range.
• Ensure the work area is clear of obstructions and potential hazards.

3. Package Contents

Verify that all items are present in the package:

• 1 × LasGoo LG-3Dx Laser Level
• 1 × Remote Control
• 1 × Magnetic Rotating Stand
• 1 × Type-C Cable
• 1 × User Manual
• 1 × Portable Storage Bag

Image: The LasGoo LG-3Dx laser level, remote control, magnetic stand, Type-C cable, user manual, and portable storage bag.

Image: A visual representation of the items included in the LasGoo LG-3Dx package, laid out neatly.

4. Product Overview

4.1 Key Features

• 3x360° Laser Lines: One horizontal and two vertical 360° green laser lines for comprehensive coverage.
• Green Laser Technology: Provides high visibility, up to 4 times brighter than red lasers.
• Self-Leveling Mode: Automatically levels within ±4° inclination.
• Manual Mode: Allows projection of lines at any angle.
• Pulse Mode: Extends working range up to 328 feet with a laser receiver (not included).
• Rechargeable Battery: High-capacity 4000mAh battery for up to 10 hours of continuous operation.
• Remote Control: For convenient remote operation.
• IP54 Rating: Dustproof and splashproof for durability in various work environments.

Image: Close-up of the laser level showing the bright green laser beam, highlighting its high visibility and brightness compared to red lasers.

Image: The laser level positioned in a dusty, debris-filled environment, illustrating its IP54 dustproof and waterproof rating.

5. Setup

5.1 Initial Charge

Before first use, fully charge the laser level's internal battery using the provided Type-C cable. Connect the cable to the device and a suitable USB power source. The charging indicator will show the charging status.

Image: A visual representation of the laser level's rechargeable battery, indicating 10 hours working time, 4000mAh capacity, and USB-C port.

Image: The laser level connected to a charging cable, illustrating its extended battery life of 10 hours working duration after 4-6 hours of charging.

5.2 Mounting the Device

The LG-3Dx can be mounted using its 1/4" mounting thread or the included magnetic rotating stand.

• Magnetic Rotating Stand: Attach the laser level to the magnetic stand. The stand can then be affixed to metallic surfaces or placed on a stable platform.
• Tripod Mounting: Screw the laser level onto a standard tripod (not included) using the 1/4" thread at the bottom of the unit.

Image: Demonstrates the laser level mounted on a magnetic bracket and a mini tripod, highlighting the 1/4" mounting thread for versatile placement.

6. Operating Modes

The LG-3Dx offers two primary operating modes: Self-Leveling Mode and Manual Mode.

6.1 Self-Leveling Mode

• Slide the pendulum lock switch to the unlocked position.
• The laser level will automatically self-level within an inclination of ±4°.
• If the device is outside this range, the laser lines will flash rapidly to indicate it cannot self-level. Adjust the device's position until the lines stabilize.
• Press the H button to activate/deactivate horizontal lines.
• Press the V1/V2 button to activate/deactivate vertical lines.

6.2 Manual Mode (Tilt Mode)

• Slide the pendulum lock switch to the locked position.
• The laser lines can now be projected at any desired angle without self-leveling.
• The laser lines will flash slowly to indicate that manual mode is active and the lines are not level.
• Press the H button to activate/deactivate horizontal lines.
• Press the V1/V2 button to activate/deactivate vertical lines.

Image: Two panels demonstrating the laser level in use. The top panel shows self-leveling mode with a worker marking a level line. The bottom panel shows manual mode with the laser level tilted to project an angled line.

6.3 Pulse Mode

• Activate Pulse Mode by pressing the dedicated pulse button (often indicated by a 'P' or wave icon) on the device or remote control.
• In Pulse Mode, the laser beam's intensity is modulated, allowing it to be detected by a compatible laser receiver (not included) over longer distances or in bright conditions.
• The working range can be extended up to 328 feet (100 meters) with a receiver.

Image: The laser level projecting lines in a large room, with text indicating "Pulse Mode" and "Extend Working Range up to 328 feet," implying use with a receiver.

7. Remote Control Operation

The included remote control allows for convenient operation of the laser level from a distance.

• H Button: Toggles the horizontal laser line on/off.
• V1/V2 Button: Toggles the vertical laser lines on/off.
• Power Button: Turns the laser level on/off.

Image: A hand holding the remote control, operating the laser level which is mounted on a wall, demonstrating effortless remote operation.

8. Applications

The LasGoo LG-3Dx laser level is suitable for a wide range of applications, including but not limited to:

• Picture hanging and gallery wall alignment.
• Tile laying on floors and walls.
• Installation of suspended ceilings.
• Cabinet and furniture installation.
• General construction and renovation projects requiring precise leveling and alignment.

Image: A collage showing the laser level being used for various tasks such as furniture installation, tile laying, and suspended ceiling installation, demonstrating its versatility.

9. Maintenance

• Clean the laser level regularly with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Keep the laser apertures clean to ensure clear beam projection.
• Store the device in its portable storage bag in a dry, dust-free environment when not in use.
• Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
• Ensure the pendulum lock is engaged during transport to prevent damage to the internal components.

10. Troubleshooting

11. Specifications

12. Warranty and Support

LasGoo products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the official LasGoo website or your purchase documentation. Please have your model number (LG-3Dx) and purchase date available when contacting support.

For further assistance, visit the LASGOO Store on Amazon.