1. Introduction
Thank you for choosing the EUGAD Nightstand with 2 Drawers, Model 0001CTG. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
2. Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all parts are securely fastened before use. Do not overtighten screws.
- Keep small parts and packaging materials away from children and pets.
- Do not stand or sit on the nightstand.
- Anti-Tipping Safety: This nightstand includes an anti-tipping strap. It is crucial to install this strap to a wall stud using appropriate hardware to prevent the unit from tipping over, especially in households with children or pets. Failure to do so can result in serious injury.
Figure 2.1: Installation of the anti-tipping strap for enhanced safety.
3. Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Top Panel
- Side Panels (Left & Right)
- Back Panel
- Drawer Panels (Front, Back, Sides, Bottom)
- Metal Legs (4 pieces)
- Adjustable Feet (4 pieces)
- Drawer Glides (Left & Right, for each drawer)
- Assembly Hardware (screws, dowels, cam locks, anti-tipping strap, etc.)
- Assembly Tool (e.g., Allen key)
4. Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.
- Prepare the Workspace: Clear a spacious area and lay out all components on a soft, clean surface to prevent damage.
- Attach Drawer Glides to Side Panels: Secure the drawer glides to the inner sides of the nightstand's side panels using the provided screws. Ensure they are oriented correctly.
- Assemble the Main Frame: Connect the side panels to the top and bottom panels using dowels and cam locks/screws. Ensure the back panel groove is aligned.
- Install the Back Panel: Slide the back panel into the grooves and secure it with small nails or screws if provided.
- Assemble Drawers: For each drawer, connect the front, back, and side panels. Insert the drawer bottom into the grooves. Attach the remaining drawer glide parts to the sides of the assembled drawers.
- Install Metal Legs: Attach the four metal legs to the bottom of the nightstand frame using the designated screws.
- Attach Adjustable Feet: Screw the adjustable feet into the bottom of each metal leg. These can be adjusted later to level the nightstand.
- Insert Drawers: Carefully slide the assembled drawers onto the glides within the nightstand frame.
- Install Anti-Tipping Strap: Secure the anti-tipping strap to the back of the nightstand and then to a wall stud using appropriate wall anchors and screws (refer to Figure 2.1).
Figure 4.1: Overall dimensions and weight capacity of the nightstand.
5. Product Features and Usage
The EUGAD Nightstand is designed for practical storage and aesthetic appeal.
- Spacious Top Surface: The top surface (40x40 cm) is ideal for placing items such as lamps, alarm clocks, books, or decorative pieces.
- Two Storage Drawers: Two drawers, each measuring approximately 40 x 30.5 x 14.7 cm (L x W x H), provide concealed storage for personal belongings, keeping your space tidy.
- Smooth Drawer Operation: Equipped with metal glides, the drawers open and close smoothly and quietly.
- Adjustable Feet: The gold metal legs feature adjustable feet, allowing you to stabilize the nightstand on uneven floors and protect your flooring from scratches. The height from the floor to the bottom of the nightstand is approximately 20.8 cm.
- Unique 3D Effect Design: The drawer fronts feature a distinctive 3D geometric pattern, adding a modern and elegant touch to your room.
Figure 5.1: Multiple storage options and smooth drawer runners.
Figure 5.2: Adjustable feet for stability and floor protection.
6. Maintenance and Care
To ensure the longevity and appearance of your EUGAD Nightstand, follow these care guidelines:
- Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the finish.
- Spills: Immediately wipe up any spills to prevent staining or water damage. The melamine surface is water-repellent, but prolonged exposure to liquids should be avoided.
- Protection: Use coasters under drinks and protective pads under decorative items to prevent scratches and marks on the top surface.
- Inspection: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the finish.
Figure 6.1: High-quality panel features for durability and easy maintenance.
7. Troubleshooting
If you encounter any issues with your nightstand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Nightstand is wobbly or uneven. | Uneven floor; loose leg connections. | Adjust the leveling feet on the bottom of the legs. Ensure all leg screws are tightened. |
| Drawers do not slide smoothly. | Drawer glides misaligned; debris in glides; loose screws. | Remove the drawer and check for obstructions in the glides. Ensure all screws on the glides are tight and properly aligned. |
| Drawer front appears misaligned. | Drawer box not assembled squarely; drawer glides not installed evenly. | Recheck drawer assembly and glide installation. Ensure all connections are firm and square. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | EUGAD |
| Model Number | 0001CTG |
| Overall Dimensions (L x W x H) | 40 x 40 x 53 cm (15.7 x 15.7 x 20.8 inches) |
| Drawer Internal Dimensions (L x W x H) | Approx. 40 x 30.5 x 14.7 cm (15.7 x 12 x 5.7 inches) |
| Material | E1 Class MDF, Metal Legs |
| Color | White with Gold Legs |
| Maximum Weight Capacity | 25 kg (55 lbs) |
| Features | 3D effect drawer fronts, adjustable feet, anti-tipping strap, smooth metal glides, scratch-resistant, water-repellent, easy to clean. |
9. Warranty and Support
EUGAD products are manufactured with quality and care. For warranty information, missing parts, or any support needs, please contact your retailer or the EUGAD customer service directly. Please have your model number (0001CTG) and purchase date ready when contacting support.
You can often find contact details on the packaging or the retailer's website where you purchased the product.
