BoxWave ClearTouch Crystal Screen Protector Instruction Manual

Introduction

Thank you for choosing the BoxWave ClearTouch Crystal Screen Protector. This manual provides detailed instructions for the proper installation, use, and maintenance of your screen protector, ensuring optimal protection and clarity for your Stripe BBPOS WisePOS E device.

Image: The Stripe BBPOS WisePOS E device, showcasing the application of the ClearTouch Crystal screen protector.

Product Overview

The BoxWave ClearTouch Crystal Screen Protector is designed to provide superior protection for your device's screen while maintaining its original visual clarity and touch sensitivity. Key features include:

• Perfect Fit: Precision-cut to match the exact dimensions of the Stripe BBPOS WisePOS E.
• Glass-Like Clarity: Ultra-high 99% visual transparency ensures vibrant colors and clear viewing.
• Durability: Made from high-grade thermoplastics to protect against scratches and dust.
• Residue-Free Adhesive: Glueless adhesive bonds perfectly and leaves no sticky residue upon removal.
• 2-Pack: Includes two screen protectors for convenience.

Image: Packaging of the BoxWave ClearTouch Crystal Screen Protector, highlighting its key features such as color brilliance, clarity, precision, and reusability.

Package Contents

Each package of the BoxWave ClearTouch Crystal Screen Protector includes the following items:

• 2 x ClearTouch Crystal Screen Protectors
• 1 x ClearTouch Applicator Card
• 1 x Microfiber Cleaning Cloth

Image: The complete contents of the screen protector package, including two screen protectors, an applicator card, and a microfiber cleaning cloth.

Setup: Installation Guide

Follow these steps carefully for optimal installation of your ClearTouch Crystal Screen Protector:

1. Prepare Your Workspace: Choose a clean, dust-free environment. Wash your hands thoroughly to avoid transferring oils or dirt to the screen or protector.
2. Clean the Device Screen: Use the included microfiber cleaning cloth to thoroughly clean the screen of your Stripe BBPOS WisePOS E. Ensure all dust, smudges, and fingerprints are removed. For stubborn marks, a small amount of screen cleaner can be used, but ensure the screen is completely dry before proceeding.
3. Remove Dust: Use a dust-removing sticker (if available, or clear tape) to lift any remaining dust particles from the screen. Inspect the screen under light to ensure it is perfectly clean.
4. Peel Back Layer 1: Carefully peel back about one inch of the protective film labeled "Layer 1" from one end of the screen protector. Avoid touching the adhesive side.
5. Align the Protector: Align the exposed adhesive edge of the screen protector with one edge of your device's screen. Take care to align it precisely with the screen's contours and any cutouts (e.g., camera, sensors).
6. Apply Gradually: Slowly and steadily lower the rest of the screen protector onto the device's screen while simultaneously peeling back "Layer 1". Use the applicator card to gently push out air bubbles as you go, working from the applied edge towards the opposite end.
7. Remove Air Bubbles: If bubbles remain, use the applicator card to push them towards the nearest edge. Small bubbles may dissipate on their own within 24-48 hours due to the special low-tack adhesive.
8. Remove Layer 2: Once the protector is fully adhered and bubbles are minimized, carefully peel off the top protective film labeled "Layer 2" (if present).
9. Final Wipe: Give the newly installed screen protector a gentle wipe with the microfiber cloth to remove any smudges.

Note: The special low-tack adhesive may take a short time to fully adhere around the edges. Any initial air gaps around the edges should clear out within approximately 2 days of regular use.

Operating Your Device with the Screen Protector

The BoxWave ClearTouch Crystal Screen Protector is designed to be virtually invisible and not interfere with the normal operation of your Stripe BBPOS WisePOS E device.

• Touch Sensitivity: The protector maintains full touch screen sensitivity, allowing for smooth and accurate navigation and input.
• Display Clarity: Enjoy 99% visual transparency, ensuring your device's display remains vibrant and clear without distortion.
• Compatibility: The protector is fully compatible with stylus pens and other touch input methods.

Maintenance and Care

To ensure the longevity and effectiveness of your screen protector, follow these maintenance guidelines:

• Cleaning: Regularly wipe the screen protector with the included microfiber cleaning cloth to remove fingerprints, dust, and smudges. For more thorough cleaning, lightly dampen the cloth with water or a mild, screen-safe cleaning solution. Avoid harsh chemicals or abrasive materials.
• Avoid Sharp Objects: While the protector offers scratch resistance, extreme pressure or sharp objects can still damage it.
• Reusability: The ClearTouch Crystal protector is designed with installation forgiveness. If removed carefully, it can be reused or repositioned. Ensure the adhesive side remains clean if you plan to reapply it.
• Storage: If storing the second screen protector, keep it in its original packaging in a cool, dry place to prevent damage or dust accumulation.

Troubleshooting

Specifications

Warranty and Support

BoxWave stands behind the quality of its products. For warranty information, technical support, or any inquiries regarding your ClearTouch Crystal Screen Protector, please visit the official BoxWave website or contact their customer service directly.

Website: www.boxwave.com

Please retain your proof of purchase for warranty claims.