Lamshaw Magnetic USB Charging Cable for Parsonver FF1 Smartwatch

Introduction

This instruction manual provides essential information for the safe and effective use of your Lamshaw Magnetic USB Charging Cable, specifically designed for the Parsonver FF1 1.91 Inch Smart Watch. This cable features a magnetic interface for secure connection and built-in short-circuit protection for enhanced safety during charging.

Package Contents

• 1 x Lamshaw Magnetic USB Charging Cable (Black)

Note: Smartwatch is not included.

Setup

Follow these steps to set up your charging cable:

1. Unpack the Cable: Carefully remove the charging cable from its packaging.
2. Identify Components: The cable has two ends: a magnetic charging dock for your smartwatch and a standard USB-A connector for power sources.
3. Connect to Power Source: Insert the USB-A connector into a compatible USB power source such as a computer USB port, laptop USB port, power bank, or a wall charger with a USB output. Ensure the power source provides 5 Volts.

Image: The magnetic charging end and the USB-A connector of the cable.

Operating Instructions

To charge your Parsonver FF1 Smart Watch:

1. Position the Smartwatch: Place your Parsonver FF1 Smart Watch near the magnetic charging dock of the cable.
2. Magnetic Connection: The magnetic dock will automatically align and attach to the charging points on the back of your smartwatch. Ensure the magnets attract correctly for a secure connection. If the magnets repel, the device will not charge; reverse the orientation of the dock.
3. Verify Charging: Once connected, your smartwatch display should indicate that it is charging (e.g., a battery icon with a charging animation).
4. Charging Time: A full charge typically takes approximately 2.5 hours with a 1A output current.
5. Safety Feature: The built-in short-circuit protection IC prevents overvoltage and overcurrent. If a short-circuit occurs, the protection IC will automatically cut off the circuit.

Image: Parsonver Smartwatch being charged by the Lamshaw magnetic USB cable.

Image: Illustration of correct magnetic charging interface connection.

Image: Multiple charging methods for the smartwatch using the USB cable.

Image: Charging speed indication for the smartwatch charger.

Maintenance

Proper care will extend the life of your charging cable:

• Cleaning: Gently wipe the cable and magnetic contacts with a dry, soft cloth. Avoid using liquid cleaners or abrasive materials.
• Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. The flexible PVC cable is designed for easy rolling and convenient storage.
• Handling: Avoid bending the cable sharply or pulling it by the cord when disconnecting. Always grasp the plug or magnetic dock.
• Protection: The cable features a durable ABS+PC housing and pure copper probes for stable conduction.

Image: Key features of the charging cable's construction, including materials and length.

Troubleshooting

Specifications

• Model Number: Parsonver FF1-Charger
• Brand: Lamshaw
• Connectivity Technology: USB
• Connector Type: Magnetic (for smartwatch connection), USB-A (for power source)
• Compatible Devices: Smartwatches
• Compatible Smartwatch Model: Parsonver FF1 1.91 Inch Smart Watch
• Included Components: Charger cable
• Special Features: Magnetic connection, Short Circuit Protection, Portable for Travel
• Color: Black
• Input Voltage: 5 Volts
• Cable Length: Approximately 3.3 feet (1 meter)
• Dimensions (Package): 3.94 x 1.97 x 0.39 inches
• Weight (Item): 1.76 ounces

Warranty and Support

For warranty information or technical support regarding your Lamshaw Magnetic USB Charging Cable, please refer to the seller's policy on the platform where the product was purchased. For direct inquiries, you may contact Lamshaw customer service through their official channels.

Seller: lamshaw

Return Policy: Typically 30 days for refund/replacement (check specific purchase terms).