LAREX Bottle Sterilizer and Dryer User Manual

1. Introduction

Thank you for choosing the LAREX Bottle Sterilizer and Dryer. This appliance is designed to efficiently sterilize and dry baby bottles, pacifiers, breast pump parts, and other baby accessories using high-temperature steam and filtered hot air. Please read this manual thoroughly before first use to ensure safe and optimal operation.

Figure 1: LAREX Bottle Sterilizer and Dryer

2. Important Safety Information

WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.

• Always place the sterilizer on a stable, heat-resistant surface.
• Do not immerse the base unit in water or any other liquid.
• Keep out of reach of children. This appliance is not a toy.
• Use only distilled water to prevent mineral buildup and ensure efficient operation.
• Do not open the lid during operation, as hot steam can cause burns.
• Unplug the appliance from the power outlet when not in use and before cleaning.
• Ensure the appliance is cool before handling or cleaning.
• Do not operate if the power cord or plug is damaged.
• Do not use accessories or attachments not recommended by the manufacturer.
• This appliance is for household use only.

Figure 2: Safe and Reliable Operation

3. Package Contents

Please check the box for the following items:

• Sterilizer Base Unit with Control Panel
• Lower Basket (for bottles)
• Upper Basket (for smaller accessories)
• Lid
• Measuring Cup
• Tongs
• User Manual (this document)

Figure 3: Included Accessories: Measuring Cup and Tongs

4. Product Components and Features

The LAREX Bottle Sterilizer and Dryer is designed for ease of use and versatility. Key features include:

• 8-in-1 Multifunction: Offers various modes including AUTO 1 (35 Mins Sterilize & Dry), AUTO 2 (50 Mins Sterilize & Dry), Sterilize Only, and Dry Only.
• Efficient Sterilization: Uses high-temperature steam to eliminate 99.9% of germs.
• Rapid Drying: Distributes filtered hot air for quick and complete drying.
• Universal Compatibility: Accommodates most bottle sizes and accessories.
• LED Panel: Digital display for easy function selection and progress monitoring.
• Auto Shut-off: For safety and convenience.
• Memory Function: Remembers your last setting.
• 24H Storage: Keeps items sterile for up to 24 hours if the lid remains closed.

Figure 4: 8-in-1 Multifunction Overview

Figure 5: Compatibility with various baby accessories

Figure 6: Adjustable Storage Configurations

5. Setup

Before first use, ensure all components are clean. Refer to the "Maintenance & Cleaning" section for initial cleaning instructions.

1. Place the sterilizer base unit on a flat, stable, and heat-resistant surface.
2. Pour 80ml of distilled water into the heating plate of the base unit using the provided measuring cup. Do not overfill.
3. Place the lower basket onto the base unit. Arrange clean, empty bottles upside down on the bottle rack.
4. If sterilizing smaller items like pacifiers or pump parts, place them in the upper basket and then place the upper basket on top of the lower basket.
5. Place the lid securely on top of the assembled unit.
6. Plug the power cord into a suitable electrical outlet.

Figure 7: Steps for Use Overview

6. Operating Instructions

The LAREX Sterilizer and Dryer features an intuitive LED control panel.

Figure 8: Control Panel

Control Panel Functions:

• MODE Button: Press to cycle through available functions (AUTO 1, AUTO 2, Sterilize Only, Dry Only).
• Up/Down Arrows: Adjust time for Sterilize Only or Dry Only modes (if applicable).
• Power Button: Turns the unit on/off.
• LED Display: Shows remaining time or selected mode.

Operating Modes:

1. Power On: Press the ⏻ (Power) button to turn on the unit. The LED display will light up.
2. Select Function: Press the MODE button repeatedly to select your desired function:
   • AUTO 1 (35 Mins Sterilize & Dry): This mode automatically sterilizes and then dries the contents for a total cycle time of 35 minutes. Ideal for daily use.
   • AUTO 2 (50 Mins Sterilize & Dry): This mode provides a longer sterilization and drying cycle (50 minutes total). Use for a more thorough dry or if items are particularly damp.
   • Sterilize Only: This mode performs only the sterilization cycle. The default time is 10 minutes. You can adjust the time using the Up/Down arrows if needed.
   • Dry Only: This mode performs only the drying cycle. The default time is 30 minutes. You can adjust the time using the Up/Down arrows if needed.
3. Start Cycle: Once a mode is selected, the cycle will begin automatically after a few seconds, or you can press the Power button again to start immediately. The LED display will show the countdown.
4. Cycle Completion: The unit will automatically shut off and beep when the cycle is complete.
5. Remove Items: Carefully remove the lid (steam may escape) and use the provided tongs to remove sterilized and dried items.

Note: For optimal drying, ensure items are placed with openings facing downwards to allow water to drain and hot air to circulate effectively.

7. Maintenance & Cleaning

Regular cleaning ensures optimal performance and extends the life of your sterilizer.

Daily Cleaning:

1. Always unplug the unit and allow it to cool completely before cleaning.
2. Wipe the heating plate (stainless steel surface) with a damp cloth to remove any water residue.
3. Wash the baskets and lid with warm soapy water, rinse thoroughly, and allow to air dry. These parts are top-rack dishwasher safe.
4. Wipe the exterior of the base unit with a damp cloth. Do not use abrasive cleaners or immerse the base unit in water.

Figure 9: Cleaning the Heating Plate

Descaling (Monthly or as needed):

Mineral deposits (limescale) may build up on the heating plate, especially if tap water is used. Descaling is essential for efficient operation.

1. Mix 50ml of white vinegar with 100ml of water.
2. Pour the mixture onto the heating plate.
3. Allow it to soak for 30 minutes to 1 hour, or until the limescale loosens. For stubborn deposits, you can run a short "Sterilize Only" cycle (e.g., 5 minutes) with the vinegar solution.
4. Pour out the solution and wipe the heating plate clean with a damp cloth. Rinse thoroughly to remove any vinegar smell.

Air Filter Maintenance:

The sterilizer has a built-in air filter to prevent secondary pollution. Check and clean the filter regularly.

• Locate the air filter cover on the bottom of the base unit.
• Twist or unclip the cover to remove it.
• Remove the filter and gently brush off any dust or debris. If heavily soiled, rinse with water and allow to air dry completely before reinserting.
• Replace the filter and secure the cover.

Figure 10: Air Filter Location and Removal

8. Troubleshooting

If you encounter issues, please refer to the table below before contacting customer support.

9. Specifications

Figure 11: Product Dimensions

10. Warranty and Support

LAREX products are manufactured with high-quality materials and are thoroughly tested. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship from the date of purchase.

For warranty claims, technical support, or any questions regarding your LAREX Bottle Sterilizer and Dryer, please contact our customer service team:

• Email: Refer to your purchase documentation or the LAREX official website for contact details.
• Online Support: Visit the LAREX Store on Amazon for FAQs and additional product information.

Please have your model number (BS-710) and purchase date ready when contacting support.