NCVI Replacement Connector Instruction Manual

1. Product Overview

This manual provides essential information for the proper use, care, and maintenance of your NCVI Replacement Connector. This connector is designed to seamlessly integrate with specific NCVI breast pump models, ensuring efficient and hygienic milk expression.

Figure 1.1: A clear image of the assembled NCVI Replacement Connector, showing its transparent design and connection points.

2. Package Contents

The NCVI Replacement Connector package typically includes the following components:

• Upper Cover
• Diaphragm
• Pump Body

Figure 2.1: A detailed diagram showing the three main components of the NCVI Replacement Connector: the upper cover, diaphragm, and pump body, with corresponding numbers.

3. Compatibility

This replacement connector is specifically designed for use with the following NCVI breast pump models:

• NCVI 8100
• NCVI 8102
• NCVI 8122
• NCVI 8116
• NCVI 8128
• NCVI 8129

Figure 3.1: An image displaying the NCVI Replacement Connector alongside various compatible NCVI breast pump models: 8100, 8102, 8116, 8122-1, and 8122-2.

4. Material and Safety Information

The NCVI Replacement Connector is manufactured from safe, high-quality materials to ensure the well-being of both mother and baby.

• BPA Free: All components are free from Bisphenol A.
• Food Grade Silicone: Made from materials safe for contact with breast milk.
• Heat-Resistant: Designed to withstand temperatures up to 248°F (120°C) for sterilization.

Figure 4.1: A woman using an NCVI breast pump, highlighting the safe, BPA-free material of the connector. Icons for BPA-free, safety, and health are visible.

5. Assembly Instructions

Follow these steps to properly assemble the NCVI Replacement Connector:

1. Ensure all components (upper cover, diaphragm, pump body) are clean and dry.
2. Carefully place the diaphragm into the pump body, ensuring it sits securely and creates a tight seal.
3. Attach the upper cover onto the pump body, aligning it correctly until it clicks into place.
4. Connect the assembled connector to your NCVI breast pump flange and tubing as per your breast pump's main instruction manual.

Figure 5.1: An illustration demonstrating the simple assembly process of the NCVI Replacement Connector, showing the diaphragm being inserted into the pump body.

6. Cleaning and Maintenance

Proper cleaning and maintenance are crucial for hygiene and product longevity.

Before First Use and After Each Use:

• Disassemble all parts of the connector.
• Wash all components in warm, soapy water. Use a mild dish soap.
• Rinse thoroughly with clean water.
• The components are dishwasher safe (top rack recommended).
• Air dry on a clean surface or use a clean cloth. Ensure all parts are completely dry before reassembly or storage to prevent mold or bacterial growth.

Sterilization:

For additional sterilization, you may boil the components in water for 5 minutes or use a steam sterilizer. Ensure parts do not touch the bottom or sides of the pot to prevent damage.

7. Specifications

• Product Dimensions: 3.15 x 2.76 x 3.23 inches
• Item Weight: 2.4 ounces
• Model Number: 8585
• Manufacturer: NCVI
• Material: Silicone
• Special Feature: Lightweight

8. Important Safety Information

Please read and retain all safety information. Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

• Always inspect components before each use for signs of wear, cracks, or damage. Discard and replace damaged parts immediately.
• Keep all breast pump parts out of reach of children when not in use.
• This product is intended for personal use and should not be shared.
• Use only genuine NCVI replacement parts to ensure proper function and safety.

9. Troubleshooting

If you experience issues with your NCVI Replacement Connector, consider the following:

• Reduced Suction: Ensure the diaphragm is correctly seated and free from tears. Check that the upper cover is securely attached. Verify that all other breast pump connections (flange, tubing) are airtight.
• Milk Leakage: Confirm that all parts are assembled correctly and tightly. Inspect for any damage to the components that might compromise the seal.
• Difficulty Assembling: Ensure parts are dry and aligned correctly. Do not force components together.

If problems persist, refer to your main NCVI breast pump manual or contact customer support.

10. Customer Support

For further assistance, product inquiries, or to report any issues, please contact NCVI customer support through the retailer where you purchased the product or visit the official NCVI website.