User Manual

1. Product Overview

The Multilaser FE006 Impact Drill and Screwdriver is designed for general daily maintenance tasks. It is suitable for tightening or loosening screws in wood and plastic, as well as for assembling and disassembling appliances and furniture. This tool features an ergonomic design with a rubberized grip for enhanced comfort during use.

It includes an LED light to assist in low-light conditions and an indicator for battery level. The drill offers 16 torque levels and two electronic speed settings (0-350 RPM and 0-1250 RPM). It also features an impact function for drilling into concrete and masonry, and a standard drilling function for wood, metal, drywall, and more resistant plastics.

The FE006 comes with two 12V lithium-ion rechargeable batteries (1300mAh) and a carrying case with various accessories, including popular drill bit sizes (5mm, 6mm, 8mm, 10mm) made with metal tips for durability.

Figure 1: Multilaser FE006 Impact Drill, its carrying case, and one of the included batteries.

2. Safety Instructions

Always observe basic safety precautions when using electrical tools to reduce the risk of fire, electric shock, and personal injury.

• Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Electrical Safety: Avoid body contact with earthed or grounded surfaces (e.g., pipes, radiators, ranges, refrigerators). Do not expose power tools to rain or wet conditions.
• Personal Safety: Always wear eye protection. Use hearing protection when operating noisy tools. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
• Battery Pack Use and Care: Recharge only with the charger specified by the manufacturer. Do not use battery packs with power tools other than those specifically designated.

3. Package Contents

Verify that all items are present upon opening the package:

• 1 x Multilaser FE006 Impact Drill and Screwdriver
• 2 x 12V Lithium-ion Batteries
• 1 x Battery Charger
• 1 x Carrying Case
• 1 x Accessory Kit (including drill bits and screwdriver bits)
• 1 x Manual of Instructions

Figure 2: The Multilaser FE006 kit with the drill, charger, batteries, and accessories neatly organized in the carrying case.

4. Setup

4.1 Charging the Battery

1. Connect the charger to a standard electrical outlet (12V Bivolt).
2. Insert the battery pack into the charger. Ensure it is seated correctly.
3. Allow the battery to charge fully before first use. The charging indicator light on the charger will signal when charging is complete.
4. Always disconnect the charger from the power source once charging is complete or if not in use.

4.2 Installing/Removing the Battery

• To Install: Align the battery pack with the base of the drill handle and slide it in until it clicks securely into place.
• To Remove: Press the battery release buttons (usually on the sides of the battery pack) and slide the battery out of the drill handle.

4.3 Installing Drill/Screwdriver Bits

1. Ensure the drill is off and the battery is removed for safety.
2. Rotate the chuck counter-clockwise to open the jaws.
3. Insert the desired drill bit or screwdriver bit into the chuck, ensuring it is centered.
4. Rotate the chuck clockwise to tighten the jaws firmly around the bit. Hand-tighten until the bit is secure.

5. Operating Instructions

5.1 Power On/Off and Speed Control

• The drill is activated by pressing the trigger switch. The speed is variable and controlled by the pressure applied to the trigger.
• The FE006 has two electronic speed levels:
  • Low Speed (0-350 RPM): Ideal for screwdriving and drilling larger holes in softer materials.
  • High Speed (0-1250 RPM): Suitable for faster drilling in wood and metal.
  Select the desired speed range using the speed selector switch located on top of the drill.
• The integrated LED light illuminates the work area when the trigger is pressed.

5.2 Torque Settings and Mode Selection

• The drill features 16 torque settings, adjustable via the collar behind the chuck.
  • Lower torque settings (1-5) are for small screws and soft materials.
  • Medium torque settings (6-10) are for general screwdriving and drilling.
  • Higher torque settings (11-16) are for larger screws and harder materials.
• Beyond the torque settings, there are two main operational modes:
  • Drill Mode: For drilling holes in wood, metal, drywall, and resistant plastics.
  • Impact (Hammer) Mode: For drilling into concrete and masonry, providing a hammering action in addition to rotation.
  Select the appropriate mode by rotating the collar to the desired icon.

5.3 Forward/Reverse Rotation

A forward/reverse selector switch is located above the trigger. Push it to the left for forward (clockwise) rotation for drilling and tightening screws, and to the right for reverse (counter-clockwise) rotation for loosening screws or removing bits.

5.4 Battery Level Indicator

The drill is equipped with a battery level indicator, typically a series of LED lights, which shows the remaining charge of the battery pack. Check this indicator periodically to ensure sufficient power for your task.

6. Maintenance

6.1 Cleaning

• Always disconnect the battery pack before cleaning.
• Use a soft, damp cloth to wipe down the exterior of the tool. Do not use harsh chemicals or abrasive cleaners.
• Keep the ventilation openings clear of dust and debris to prevent overheating. Use compressed air if necessary.

6.2 Storage

• Store the tool and accessories in the provided carrying case in a dry, secure location, away from direct sunlight and extreme temperatures.
• Ensure batteries are partially charged (not fully depleted or fully charged) for long-term storage to prolong their lifespan.

6.3 Battery Care

• Do not expose batteries to water or extreme heat.
• Do not store batteries in direct sunlight or where temperatures may exceed 50°C (122°F).
• If a battery pack is damaged, do not attempt to repair it. Contact customer support for replacement.

7. Troubleshooting

8. Specifications

9. Warranty and Support

The Multilaser FE006 Impact Drill and Screwdriver comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or service inquiries, please contact Multilaser customer service. Keep your purchase receipt as proof of purchase.

For further assistance, please refer to the official Multilaser website or contact their authorized service centers.