1. Product Overview
The ORICO M.2 NVMe SATA SSD Enclosure (Model M2PV-US) provides a high-speed external storage solution for M.2 solid-state drives. It features a USB 3.1 Gen 2 Type-C interface, supporting data transfer rates up to 10 Gbps. This enclosure is designed for portability and efficient heat dissipation, making it suitable for various applications across multiple operating systems.
Image: The ORICO M.2 NVMe SATA SSD Enclosure, showcasing its sleek design, USB-C and USB-A cables, and thermal pad.
2. Package Contents
Please verify that all items are present in the package:
- 1 x ORICO M.2 SSD Enclosure (M2PV-US)
- 1 x USB-C to C Cable
- 1 x USB-A to C Cable
- 1 x Thermal Pad
- 2 x Rubber Fasteners
- 1 x Screwdriver
- 1 x Instruction Book (this manual)
Image: A visual representation of the package contents, including the enclosure, cables, thermal pad, screwdriver, and rubber fasteners.
3. Setup and Installation
Follow these steps to install your M.2 SSD into the enclosure:
- Open the Enclosure: Use the supplied screwdriver to open the enclosure. The top aluminum cover will slide off or hinge open.
- Insert the SSD: Carefully insert your M.2 SSD into the card slot at a 45-degree angle. Ensure it is fully seated.
- Secure the SSD: Gently push the SSD down until it is parallel with the PCB. Use one of the rubber fasteners to secure the end of the SSD into the designated hole. This replaces the traditional screw.
- Apply Thermal Pad: Peel off the protective films from both sides of the thermal pad. Place the thermal pad onto the SSD, ensuring it covers the main chips for optimal heat transfer.
- Close the Enclosure: Reattach the aluminum cover and secure it with the screw.
- Connect to Device: Connect the enclosure to your computer or compatible device using the provided USB-C to C or USB-A to C cable.
- Format New SSD (Important): For new SSDs, you must partition and format the drive before it can be recognized and used by your operating system. Access Disk Management (Windows) or Disk Utility (macOS) to perform this action.
Image: A visual guide illustrating the four steps for easy installation of an M.2 SSD into the enclosure, including opening, inserting, securing, and applying the thermal pad.
SSD Compatibility
This enclosure supports the following M.2 SSD types and sizes:
- M.2 NVMe PCIe SSDs: Compatible with M-Key and M+B Key form factors.
- M.2 SATA/NGFF SSDs: Compatible with M+B Key form factors.
- Not Compatible: B-Key SATA/NGFF SSDs.
- Supported Sizes: 2230, 2242, 2260, 2280.
Image: A detailed diagram illustrating the supported M.2 SSD types (NVMe and SATA) and their compatible key configurations (M-Key, B+M Key) and sizes (2230, 2242, 2260, 2280).
4. Operating Instructions
Once the SSD is installed and the enclosure is connected to your device, it operates as a standard external storage drive.
- Plug and Play: The enclosure is hot-swappable and does not require any special drivers for Windows, macOS, or Linux operating systems.
- Data Transfer: Utilize the USB 3.1 Gen 2 (10 Gbps) interface for high-speed data transfer, enhanced by UASP acceleration protocol.
- LED Indicator: An LED indicator on the enclosure shows the working status of the SSD.
- Auto Sleep: The enclosure features an auto-sleep function after 10 minutes of inactivity to conserve power and extend SSD lifespan.
Image: A user operating a laptop with the ORICO M.2 NVMe SATA SSD Enclosure connected, illustrating high-speed data transmission capabilities up to 10Gbps for NVMe SSDs and 6Gbps for SATA SSDs.
Image: The ORICO M.2 NVMe SATA SSD Enclosure demonstrating wide compatibility with various devices such as PCs, laptops, smartphones, tablets, smart TVs, and game consoles, across Windows, macOS, Linux, and Android operating systems.
5. Maintenance
To ensure the longevity and optimal performance of your ORICO M.2 NVMe SATA SSD Enclosure, consider the following maintenance guidelines:
- Heat Dissipation: The aluminum top cover is designed to aid in heat dissipation. Ensure the enclosure is not covered or placed in an area with poor airflow during extended use.
- Cleaning: Keep the enclosure clean and free from dust. Use a soft, dry cloth for cleaning. Avoid liquid cleaners.
- Physical Protection: Handle the enclosure with care to prevent physical damage. Avoid dropping it or exposing it to extreme temperatures or moisture.
Image: An exploded view of the enclosure highlighting the aluminum alloy fin design and silicone thermal pad, which contribute to effective heat dissipation.
6. Troubleshooting
If you encounter issues with your ORICO M.2 NVMe SATA SSD Enclosure, please refer to the following common solutions:
- SSD Not Recognized:
- Ensure the SSD is correctly installed and secured within the enclosure.
- Verify that the USB cable is securely connected to both the enclosure and your host device.
- If it is a new SSD, it must be partitioned and formatted before first use. Check your operating system's Disk Management (Windows) or Disk Utility (macOS) to initialize and format the drive.
- Confirm that the SSD type (NVMe or SATA) and key (M-Key, B+M Key) are compatible with the enclosure.
- Try connecting the enclosure to a different USB port or a different computer to rule out port or system issues.
- Slow Data Transfer Speed:
- Ensure the enclosure is connected to a USB 3.1 Gen 2 (10 Gbps) compatible port on your host device. Connecting to a USB 2.0 or USB 3.0 (5 Gbps) port will result in lower speeds.
- Verify that your SSD itself is capable of high speeds.
- Check the integrity of the USB cable. Try using a different cable if available.
- Enclosure Gets Hot:
- It is normal for the enclosure to become warm during high-speed data transfer, as the aluminum casing is designed to dissipate heat from the SSD. This indicates proper heat management.
- Ensure the thermal pad is correctly installed between the SSD and the aluminum cover.
7. Specifications
| Model | M2PV-US |
| Material | Aluminum Alloy (top), Plastic (bottom) |
| Interface | USB 3.1 Gen 2 Type-C |
| Data Transfer Rate | Up to 10 Gbps (theoretical) |
| Compatible SSDs | M.2 NVMe PCIe SSD (M-Key/M+B Key), M.2 SATA/NGFF SSD (M+B Key) |
| Incompatible SSDs | B-Key SATA/NGFF SSD |
| Supported SSD Sizes | 2230, 2242, 2260, 2280 |
| Max Capacity | 4 TB |
| Dimensions (L x W x H) | 4.25 x 1.16 x 0.53 inches (108 x 30 x 14 mm) |
| Weight | 0.704 ounces (0.02 kg) |
| Operating Systems | Windows, macOS, Linux |
| Features | UASP Support, Hot-swappable, Plug and Play, Auto Sleep (10 min), LED Indicator |
Image: A diagram illustrating the compact dimensions of the ORICO M.2 NVMe SATA SSD Enclosure, measuring 108mm in length, 30mm in width, and 14mm in height.
8. Warranty and Support
ORICO is committed to providing reliable products and customer satisfaction.
- Technical Support: ORICO offers 7 x 24-hour technical support. If you encounter any issues or have questions regarding your product, please contact ORICO customer service.
- Warranty Information: Specific warranty duration details are not provided in this manual. Please refer to the product packaging or the official ORICO website for the most current warranty policy.
