1. Setup Instructions
Follow these steps to properly set up your Sunbeam Royal Ultra Heated Blanket.
1.1 Unpacking
- Carefully remove the heated blanket and controller from the packaging.
- Inspect the blanket and power cord for any signs of damage. Do not use if damaged.
1.2 Connecting the Controller
- Locate the connector on the blanket.
- Align the controller cord with the blanket connector and push firmly until it clicks into place. Ensure a secure connection.
- Plug the power cord into a 120V AC electrical outlet.
Image: The detachable controller for the Sunbeam Royal Ultra Heated Blanket, showing the heat setting dial and the On/Off button.
1.3 Placement on Bed
- Place the heated blanket directly on top of your mattress.
- Ensure the blanket is spread evenly and not bunched or folded.
- You may place a flat sheet over the heated blanket, and then your regular bedding.
Image: The Sunbeam Royal Ultra Heated Blanket laid out smoothly on a bed, ready for use.
1.4 Safety Warnings
- Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
- Do not tuck in the controller or power cord.
- Do not use with pets.
- Avoid sharp folds in the blanket.
- Do not dry clean.
2. Operating Instructions
Learn how to use your Sunbeam Royal Ultra Heated Blanket for optimal comfort.
2.1 Turning On/Off
- To turn on: Press the "On/Off" button on the controller. The indicator light will illuminate.
- To turn off: Press the "On/Off" button again. The indicator light will turn off.
2.2 Adjusting Heat Settings
- The blanket features 10 heat settings.
- Rotate the dial on the controller to select your desired heat level, from 1 (lowest) to 10 (highest).
- Allow a few minutes for the blanket to reach the selected temperature.
2.3 Auto-Off Feature
- For safety and energy conservation, the blanket is equipped with a 10-hour auto-shut off feature.
- The blanket will automatically turn off after 10 hours of continuous operation.
- To restart, simply turn the blanket off and then on again using the controller.
3. Care & Maintenance
Proper care ensures the longevity and performance of your heated blanket.
3.1 Washing Instructions
- Disconnect: Always disconnect the controller from the blanket and unplug the power cord from the wall outlet before washing.
- Pre-soak (Optional): For best results, pre-soak the blanket for 15 minutes in mild soap and cold water.
- Machine Wash: Machine wash on the "delicate" or "gentle" cycle in cold water (maximum 30°C / 86°F). Use a small amount of mild detergent. Do not bleach.
- Rinse: Rinse on the "normal" cycle.
- Machine Dry: Tumble dry on low heat for 5-10 minutes. Remove while still damp and air dry over a clothesline or shower rod. Do not iron.
- Ensure Dryness: Ensure the blanket and controller connector are completely dry before reconnecting and using.
Image: The Sunbeam Royal Ultra Heated Blanket, neatly folded, demonstrating its soft texture.
3.2 Storage
- When not in use, store the blanket neatly folded or rolled in a cool, dry place.
- Avoid placing heavy objects on top of the blanket during storage to prevent damage to the internal wiring.
4. Troubleshooting
If you encounter issues with your heated blanket, refer to the following common solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket not heating or indicator light off. |
|
|
| Uneven heating or cold spots. |
|
|
| Controller light blinking. |
|
|
5. Product Specifications
- Model Name: Sunbeam Royal Ultra
- Model Number: BSF9GFS-R772-13A00
- Size: Full (84"L x 72"W)
- Material: 100% Polyester
- Heat Settings: 10
- Auto-Off Feature: 10 hours
- Care: Machine Washable, Dryer Safe (controller removed)
- Brand: Sunbeam
6. Warranty & Support
For warranty information or technical assistance, please contact Sunbeam customer support.
- Warranty: This product comes with a limited manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Sunbeam website for details.
- Customer Support: For questions, troubleshooting assistance, or to report an issue, please visit the Sunbeam support website or contact their customer service line. Have your model number (BSF9GFS-R772-13A00) ready when contacting support.