1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your DYNAMIC SAUNAS Venice Elite 2-Person Ultra Low EMF FAR Infrared Sauna. Please read this manual thoroughly before installation and use to ensure safe and optimal performance of your sauna.
Image 1.1: Exterior view of the DYNAMIC SAUNAS Venice Elite 2-Person Infrared Sauna, showcasing its Canadian Hemlock wood construction and glass door.
2. Safety Information
- Consult a physician before using the sauna if you have any health conditions, are pregnant, or are taking medication.
- Do not use the sauna under the influence of alcohol or drugs.
- Stay hydrated by drinking water before, during, and after sauna use.
- Limit sauna sessions to 30-45 minutes to prevent overheating.
- Ensure the sauna is placed on a level, stable surface.
- Do not block the ventilation openings.
- Avoid touching heating elements directly during operation.
- This sauna operates on a standard 15-amp, 120-volt circuit. Do not use extension cords.
3. Package Contents
Verify that all components are present and undamaged before beginning assembly. Contact customer support if any parts are missing or damaged.
- Front Panel (with door)
- Back Panel
- Left Side Panel
- Right Side Panel
- Roof Panel
- Floor Panel
- Bench Seat
- Control Panel (pre-installed)
- Red Light Therapy Unit (pre-installed)
- Bluetooth/MP3 Audio System (pre-installed)
- Hardware Kit (screws, clips, etc.)
- User Manual
4. Setup & Assembly
The Venice Elite sauna features a clasp-together construction for straightforward assembly. Two adults are recommended for installation.
- Prepare the Location: Choose a dry, indoor location with a level surface. Ensure access to a dedicated 15-amp, 120-volt electrical outlet.
- Install Floor Panel: Place the floor panel in the desired location.
- Connect Side and Back Panels: Attach the back panel to the floor panel, then connect the side panels using the integrated clasps. Ensure all connections are secure.
- Install Front Panel: Carefully attach the front panel, aligning the door and securing it with the clasps.
- Place Bench Seat: Position the bench seat inside the sauna.
- Install Roof Panel: Carefully place the roof panel on top of the assembled walls. Connect all electrical wiring from the walls to the roof panel as indicated in the wiring diagram (refer to included diagram).
- Final Checks: Ensure all panels are securely fastened and all electrical connections are tight.
Image 4.1: Illustration of sauna assembly steps, showing panels being connected and the roof being placed.
Image 4.2: Diagram illustrating the dimensions of the Venice Elite sauna: 75 inches (height), 48 inches (width), and 42 inches (depth).
5. Operating Instructions
5.1 Powering On and Temperature Setting
Plug the sauna into a dedicated 120V/15A outlet. Use the internal or external soft-touch control panel to power on the unit and set your desired temperature. The sauna operates up to 135°F (57°C), with a recommended comfort range between 115°F (46°C) and 130°F (54°C).
Image 5.1: Close-up of the digital control panel, showing temperature and timer display.
5.2 Pre-heating
Allow approximately 20-30 minutes for the sauna to reach the desired temperature. The 6 ultra-low EMF carbon PureTech infrared panels provide efficient and even heating.
5.3 Sauna Session
Enter the sauna once the desired temperature is reached. You can adjust the temperature and session duration using the control panel. It is recommended to start with shorter sessions (15-20 minutes) and gradually increase as your body adapts.
Image 5.2: A person seated comfortably inside the sauna, demonstrating its spacious interior.
6. Red Light Therapy & Chromotherapy
The Venice Elite sauna includes an integrated Red Light Therapy system and chromotherapy lighting. These features can be activated and controlled via the main control panel.
- Red Light Therapy: This feature provides targeted red light exposure.
- Chromotherapy Lighting: Cycle through various colors or select a specific color to enhance your sauna experience. An optional white reading light is also available.
Image 6.1: Interior view of the sauna with the red light therapy system active, showing the light panel.
7. Audio System (Bluetooth & MP3)
Your sauna is equipped with a Bluetooth and MP3 auxiliary input audio system and built-in speakers. This allows you to enjoy music or other audio during your sauna session.
- Bluetooth Pairing: Activate Bluetooth on your device and select "DYNAMIC SAUNA" from the available devices to pair.
- MP3 Aux Input: Connect an audio device using a standard 3.5mm auxiliary cable to the MP3 input jack.
- Volume Control: Adjust the volume using your connected device or the sauna's control panel if available.
8. Maintenance
8.1 Cleaning
- Wipe down the interior and exterior wood surfaces with a clean, damp cloth after each use.
- For deeper cleaning, use a mild, non-toxic wood cleaner. Avoid harsh chemicals or abrasive materials.
- Clean the glass door with a standard glass cleaner.
8.2 Wood Care
The sauna is constructed from Canadian Hemlock wood. To maintain its appearance, avoid excessive moisture and direct sunlight. Do not apply paint or varnish to the interior wood surfaces.
Image 8.1: Close-up view of the Canadian Hemlock wood, highlighting its natural grain and quality.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sauna does not power on. | No power supply; loose connection; circuit breaker tripped. | Check power cord connection. Ensure outlet is functional. Reset circuit breaker if tripped. Verify all internal wiring connections. |
| Sauna not heating sufficiently. | Temperature set too low; door not fully closed; heater malfunction. | Increase temperature setting. Ensure door is securely latched. Contact customer support if heaters are suspected to be faulty. |
| Bluetooth not connecting. | Device not in pairing mode; incorrect device selected; interference. | Ensure your device's Bluetooth is on and in pairing mode. Select "DYNAMIC SAUNA" from the list. Move closer to the sauna to reduce interference. |
| Red Light Therapy not working. | Feature not activated; internal wiring issue. | Activate Red Light Therapy via the control panel. If issue persists, contact customer support. |
10. Specifications
| Feature | Detail |
|---|---|
| Model Number | DYN-6210-04 Elite |
| Capacity | 2 Person |
| Heating Technology | FAR Infrared (6 Ultra-Low EMF Carbon PureTech Panels) |
| Wood Type | Canadian Hemlock |
| Temperature Range | Up to 135°F (57°C) |
| Electrical Requirement | 120V / 15 Amp (Standard Household Outlet) |
| Dimensions (Exterior) | Approximately 48" W x 42" D x 75" H |
| Features | Red Light Therapy, Chromotherapy, Bluetooth Speakers, MP3 Aux Input, Dual Soft-Touch Controls |
| Manufacturer | Dynamic Saunas / Golden Designs Inc (NA) |
11. Warranty & Support
For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official DYNAMIC SAUNAS website. Keep your proof of purchase for warranty claims.
Typical protection plans offered include 2-Year and 3-Year options. Contact DYNAMIC SAUNAS customer service for assistance with any product-related inquiries or issues.
For additional information or to register your product, please visit: DYNAMIC SAUNAS Official Store
