1. Introduction
Thank you for choosing the Tresda 18V/20V Cordless Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new work light. Please read this manual thoroughly before use and retain it for future reference.
Image 1.1: Tresda 18V/20V Cordless Work Light in operation, highlighting its brightness.
2. Safety Information
Always observe the following safety precautions to reduce the risk of injury or damage:
- Do not look directly into the light source when it is on, as this may cause eye injury.
- Ensure the work light is securely attached to a compatible 18V/20V DeWalt battery pack before operation.
- Do not expose the work light to rain or wet conditions.
- Keep the work light away from flammable materials.
- Do not attempt to disassemble or modify the work light. Refer all servicing to qualified personnel.
- Store the work light in a dry, secure location when not in use.
3. Product Features
- Compatibility: Designed to work seamlessly with DeWalt 18V/20V Max Li-ion Battery Packs, including models like DCB206, DCB205, DCB204, DCB181, DCB182, DCB200, DCB203, DCB205-2, DCB204-2, DCB206-2, and more.
- Bright Illumination: Features a 25W COB LED, providing a powerful 2500 Lumen output.
- Multiple Light Modes: Offers 3 distinct light modes: High, Medium, and Strobe, to adapt to various working conditions.
- Advanced Battery Protection: Equipped with advanced circuitry for low voltage protection, overheat protection, and overcurrent protection, ensuring the longevity and optimal function of your battery packs.
- Ergonomic Design: Lightweight and robust construction for easy mobility. Includes an integrated hook for convenient transportation and hands-free usage.
- Adjustable Angle: The light head can be adjusted from 0 to 180 degrees, allowing precise light direction.
Image 3.1: Compatibility with DeWalt 18V-20V Li-ion batteries.
Image 3.2: Lightweight and robust design with 180-degree rotation.
Product Video Overview
Video 3.1: An official product video demonstrating the features and functionality of the Tresda 18V/20V Cordless Work Light.
4. Setup
The Tresda 18V/20V Cordless Work Light is designed for easy setup. Follow these steps to prepare your light for use:
- Attach Battery: Align the battery pack (not included) with the base of the work light. Slide the battery onto the light until it clicks securely into place. Ensure a firm connection.
- Adjust Angle: The light head can be rotated up to 180 degrees. Adjust the angle to direct the light as needed for your task.
- Hang (Optional): Utilize the integrated hook to hang the work light for hands-free illumination.
Image 4.1: Attaching the battery pack to the work light.
5. Operating Instructions
Operating your Tresda Cordless Work Light is straightforward:
- Power On/Off: Press the power button located on the front of the light to turn it on. Press it again to cycle through the light modes or to turn it off.
- Change Light Modes: Each press of the power button will cycle through the available light modes: High, Medium, and Strobe.
- Adjust Light Direction: Manually rotate the light head to achieve the desired illumination angle (0-180 degrees).
Image 5.1: Demonstrating the three light modes: High, Medium, and Strobe.
6. Maintenance
To ensure the longevity and optimal performance of your work light, follow these maintenance guidelines:
- Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the work light in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery pack if storing for extended periods.
- Battery Care: Follow the manufacturer's instructions for your DeWalt battery pack regarding charging, storage, and usage.
7. Troubleshooting
If you encounter issues with your Tresda Cordless Work Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is not properly attached or is depleted. | Ensure the battery is securely clicked into place. Charge or replace the battery. |
| Light output is dim. | Battery is low. | Charge the battery pack. |
| Light flickers or turns off unexpectedly. | Battery connection is loose or battery is nearly depleted. | Check battery connection. Charge the battery pack. |
If the problem persists after attempting these solutions, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | Elimadent (3.0) |
| Brand | Tresda |
| Power Source | Battery Powered (Compatible with DeWalt 18V/20V Max Battery Packs) |
| Light Source Type | COB LED |
| Light Source Wattage | 25 Watts |
| Lumen Output | 2500 Lumens |
| Light Modes | High, Medium, Strobe |
| Rotation Adjustment | 0-180 degrees |
| Material | Plastic |
| Mounting Type | Hook Mount |
| Color | Yellow |
9. Warranty and Support
The Tresda 18V/20V Cordless Work Light comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use.
For warranty claims, technical support, or any inquiries regarding your product, please contact Tresda customer service through the retailer where the product was purchased or visit the official Tresda website for contact information.
Please have your purchase receipt and product model number (Elimadent 3.0) available when contacting support.
