UPBRIGHT UpBright 5V AC/DC Adapter for Homitt HM204C/HM204D

UpBright 2-Prong 5V AC DC Adapter for Homitt HM204C HM204D Power Scrubber User Manual

Model: UpBright 5V AC/DC Adapter for Homitt HM204C/HM204D

Introduction

This manual provides instructions for the safe and effective use of the UpBright 2-Prong 5V AC/DC Adapter. This adapter is designed to provide power and charge compatible devices, specifically the Homitt HM204C and HM204D Cordless Power Scrubbers. It features a 2-prong connector and operates with a global input voltage range of 100-240VAC.

The adapter incorporates essential safety features including Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure reliable and safe operation.

Package Contents

  • 1 x UpBright 2-Prong 5V AC/DC Adapter

Setup

Follow these steps to set up your UpBright AC/DC Adapter:

  1. Verify Compatibility: Ensure your device, such as the Homitt HM204C or HM204D Cordless Power Scrubber, requires a 5V DC input and has a compatible 2-pin charging port. This adapter is not compatible with 7.4V or 9V versions of devices.
  2. Connect to Device: Insert the 2-pin connector of the UpBright adapter into the charging port of your Homitt Power Scrubber. Ensure a secure connection.
  3. Connect to Power Outlet: Plug the 2-prong end of the adapter into a standard wall power outlet (100-240VAC, 50/60Hz).
UpBright 2-Prong 5V AC DC Adapter with its 2-pin connector and power plug

Image: The UpBright 2-Prong 5V AC DC Adapter showing its main body, power cord, and 2-pin connector.

UpBright 2-Prong 5V AC DC Adapter showing input/output specifications

Image: Close-up of the UpBright AC/DC Adapter displaying its input (100-240V) and output (5V) specifications.

Operating Instructions

Once connected, the adapter will begin to supply power or charge your compatible device. Observe the charging indicator on your device (if available) to confirm charging status.

  • Charging: For devices with rechargeable batteries, the adapter will initiate the charging process. The charging time will vary depending on the device's battery capacity and current charge level.
  • Direct Power: If your device can operate directly from AC power without a battery, the adapter will provide continuous power.
  • Disconnection: To disconnect, first unplug the adapter from the wall outlet, then disconnect the 2-pin connector from your device.

Maintenance

Proper care ensures the longevity and safe operation of your adapter:

  • Cleaning: Disconnect the adapter from all power sources before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid wrapping the cord too tightly around the adapter body.
  • Inspection: Periodically inspect the adapter and its cord for any signs of damage, such as frayed wires, bent prongs, or cracks in the casing. If damage is observed, discontinue use immediately and replace the adapter.
  • Environmental Conditions: Do not expose the adapter to extreme temperatures, humidity, or corrosive environments.

Troubleshooting

If you encounter issues with your UpBright adapter, refer to the following common solutions:

Problem Possible Cause Solution
Device not charging/powering on.
  • Adapter not properly plugged into outlet or device.
  • Incompatible device voltage (e.g., 7.4V or 9V device).
  • Device's internal battery is old or faulty.
  • Faulty power outlet.
  • Ensure all connections are secure.
  • Verify your device requires 5V DC input. This adapter is specifically for 5V devices.
  • Rechargeable batteries have a limited lifespan (typically 1-3 years). An old or bad battery may not accept a charge, which is not an adapter issue.
  • Test the outlet with another known working appliance.
Adapter feels warm during use. Normal operation. A slight warmth is normal during operation. If the adapter becomes excessively hot or emits a burning smell, disconnect it immediately and discontinue use.

The adapter is equipped with Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to prevent damage to both the adapter and your device.

Specifications

Brand UPBRIGHT
Input Voltage 100-240VAC, 50/60Hz
Output Voltage 5V DC
Wattage 5 Watts
Connector Type 2-Prong (US Type F - 2 pin German style plug for the wall, 2-pin connector for the device)
Compatible Devices Homitt HM204C, Homitt HM204D Cordless Power Scrubbers
Special Features OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection)
Color Black
Material Plastic
Certification CE
Image showing various international power adapters (AU, EU, UK) and a warranty certificate

Image: Example of international outlet adapters that may be included with international orders, alongside a UpBright Limited Warranty Certificate.

Warranty and Support

Your UpBright adapter comes with a comprehensive warranty and support:

  • Warranty: 30 Days Refund, 24 Months Exchange.
  • Customer Support: For any questions, issues, or warranty claims, please contact UpBright customer service through the retailer where the product was purchased.

Please retain your proof of purchase for warranty purposes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.