Ceversa 52 Inch Wood Ceiling Fan Instruction Manual

1. Introduction

Thank you for choosing the Ceversa 52 Inch Wood Ceiling Fan. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new ceiling fan. Please read this manual thoroughly before beginning installation and retain it for future reference.

Product Overview

• Solid Wood Blades: Crafted from paulownia wood for durability and resistance to rot and corrosion. Aerodynamically designed and balanced for stable rotation.
• Noiseless Reversible DC Motor: Features solid copper wire for over 50% enhanced efficiency and reduced energy consumption. Operates below 30 decibels for quiet performance.
• Multi-function Remote Control: Offers 6 fan speeds, 1/4/8 hour timer settings, and easy operation.
• Easy Installation: Includes 5" and 10" downrods to accommodate various ceiling heights. Most components are pre-installed.
• Convenient Memory Function: Recalls the last fan setting after power interruption.
• Versatile Use: Suitable for bedrooms, living rooms, outdoor patios, cottages, porches, offices, dining areas, and farmhouses.

Figure 1: Ceversa 52 Inch Wood Ceiling Fan in a living room setting.

2. Package Contents

Before beginning installation, ensure all components listed below are present and undamaged. If any parts are missing or damaged, do not attempt to install and contact customer service.

• Ceiling Fan Motor Assembly
• 3 Solid Wood Fan Blades
• Remote Control
• Remote Control Holder
• 5" Downrod
• 10" Downrod
• Mounting Bracket
• Canopy
• Canopy Cover
• Hardware Pack (screws, washers, wire nuts)
• Instruction Manual

Figure 2: All fan components as received in the package.

3. Setup and Installation

Safety Precautions

• Always turn off power at the circuit breaker before beginning installation.
• Ensure the mounting structure can support the weight of the fan (approx. 12.38 lbs).
• Follow all local electrical codes and ordinances.
• If you are unsure about wiring, consult a qualified electrician.
• Do not expose solid wood blades to direct rain.

Assembly Steps

Refer to the detailed installation video provided by the manufacturer for visual guidance.

1. Attach Fan Blades: Secure each of the three solid wood blades to the motor assembly using the provided screws. Ensure they are firmly attached.


Figure 3: Exploded view illustrating the fan components and how they connect.

2. Assemble Downrod: Choose either the 5" or 10" downrod based on your ceiling height. Thread the fan's wires through the downrod. Secure the downrod to the motor assembly using the provided pin and set screw.
3. Install Mounting Bracket: Secure the mounting bracket to your ceiling's electrical junction box. Ensure it is properly anchored to a ceiling joist or a fan-rated outlet box.
4. Wire Connections: Connect the fan's electrical wires to your household wiring according to the provided wiring diagram in the manual. Typically, this involves connecting live, neutral, and ground wires.
5. Hang Fan: Carefully lift the fan assembly and hang it onto the mounting bracket. Ensure the fan is securely seated in the bracket's hook.
6. Install Receiver: Connect the remote control receiver to the fan's wiring harness. Tuck the receiver neatly into the canopy.
7. Attach Canopy: Slide the canopy up the downrod and secure it to the mounting bracket with screws. Ensure all wires are tucked inside the canopy.

Room Suitability and Dimensions

The 52-inch fan is suitable for large rooms up to 10x20 feet. It comes with two downrods (5" and 10") to accommodate various ceiling heights. Best installed when ceiling slope is within 10 degrees.

Figure 4: Fan dimensions and recommended room sizes for optimal air circulation.

4. Operating Instructions

Remote Control Functions

Your Ceversa ceiling fan comes with a multi-function remote control for convenient operation.

Figure 5: Remote control layout with various function buttons.

• Power Button: Turns the fan ON/OFF.
• Fan Speed Buttons (1-6): Adjusts the fan speed from 1 (lowest) to 6 (highest).
• Timer Buttons (1H, 4H, 8H): Sets the fan to automatically turn off after 1, 4, or 8 hours.
• Reverse Function Button: Changes the direction of the fan blades for seasonal use.
• Memory Function: The fan will restore to its last setting after a power interruption if the power switch is turned off and on again after 10 seconds.

Seasonal Operation (Reverse Function)

The reversible DC motor allows for year-round comfort by changing the direction of airflow.

Figure 6: Illustration of fan airflow for summer and winter modes.

• Summer Forward Mode: Blades rotate counter-clockwise, pushing air downwards to create a cooling breeze.
• Winter Reverse Mode: Blades rotate clockwise, drawing air upwards to circulate warm air trapped near the ceiling, helping to warm the room.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your ceiling fan.

• Cleaning: To protect the solid wood, the ceiling fan should not be exposed to direct rain. Clean the fan blades and motor housing periodically with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.


Figure 7: Regular cleaning helps maintain the fan's appearance and performance.

• Tighten Fasteners: Check all screws and fasteners on the fan and mounting bracket periodically to ensure they are secure.
• Blade Balance: If the fan wobbles, check that all blades are securely attached and balanced. A balancing kit (not included) may be used if necessary.

6. Troubleshooting

If you experience issues with your fan, consult the table below for common problems and solutions.

7. Specifications

8. Warranty and Support

Ceversa stands behind the quality of its products.

• Motor Warranty: The motor is guaranteed for 10 years.
• Component Warranty: The remote control and other components are guaranteed for 2 years.

If you have any questions or require assistance with your Ceversa 52 Inch Ceiling Fan, please contact us through Amazon. We are committed to providing prompt support and will answer you as soon as possible.