ocioc 9014

ocioc 52-inch Ceiling Fan with Lights

Model: 9014 - Instruction Manual

1. Introduction

Thank you for choosing the ocioc 52-inch Ceiling Fan with Lights. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new ceiling fan. Please read this manual thoroughly before installation and retain it for future reference.

This ceiling fan features a quiet DC motor, reversible airflow, integrated LED lighting with adjustable color temperature, and convenient remote control operation. It is designed for both indoor and covered outdoor use.

2. Safety Information

  • Always disconnect power at the circuit breaker before installation or servicing.
  • All wiring must be in accordance with national and local electrical codes.
  • Ensure the installation site can support the fan's weight (approximately 10 pounds).
  • Do not bend the blade holders during installation or cleaning.
  • Keep a minimum clearance of 7 feet from the floor to the bottom of the fan blades.
  • Do not operate the fan if any part is damaged.
  • This fan is suitable for indoor and covered outdoor locations.

3. Package Contents

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact customer support.

  • Ceiling Fan Motor Assembly
  • Fan Blades (5x)
  • Integrated LED Light Kit
  • Remote Control with Wall Mount
  • Mounting Hardware (screws, wire nuts, etc.)
  • Instruction Manual
Diagram showing the components of the ocioc 52-inch ceiling fan, including ABS fan blades, dimmable LED light, flush mount design, and quiet DC motor.

Image: Key components of the ocioc 52-inch ceiling fan.

4. Specifications

Brandocioc
Model Name9014
Size52 inch
ColorBlack
Motor TypeDC Reversible Motor
Number of Blades5
Air Flow Capacity4137 Cubic Feet Per Minute (CFM)
Noise Level<30 dB
Light KitIntegrated LED, 3 Color Temperature (3000K, 4000K, 6500K), Dimmable
Control MethodRemote Control (6 speeds, timer, light control)
Installation TypeFlush Mount
Power SourceAC 120V
Wattage50 watts
Dimensions52"D x 52"W x 9"H
Weight10 Pounds
UsageIndoor, Covered Outdoor
Diagram showing the dimensions of the 52-inch ceiling fan and recommended room sizes for optimal performance.

Image: Fan dimensions and recommended room size.

5. Installation Instructions

Most complex installation procedures are pre-completed. Follow these steps carefully for a safe and successful installation.

  1. Turn Off Power: Before starting, ensure the power supply to the fan location is turned off at the circuit breaker.
  2. Mounting Bracket Installation: Securely attach the mounting bracket to the ceiling junction box. Ensure the junction box is rated for ceiling fan support.
  3. Wiring Connections: Connect the fan's electrical wires to the household wiring according to local electrical codes. Use appropriate wire nuts.
  4. Fan Assembly: Attach the fan motor assembly to the mounting bracket.
  5. Blade Attachment: Securely attach the five fan blades to the motor housing. Ensure all screws are tightened.
  6. Light Kit Installation: Connect and install the integrated LED light kit to the fan assembly.
  7. Final Checks: Double-check all connections and ensure no wires are pinched.
  8. Restore Power: Turn the power back on at the circuit breaker.
Image showing the ocioc 52-inch ceiling fan installed in a room, highlighting its multifunctional features like dimmable light, 6-speed airflow, timer setting, reversible motor, remote control, and easy installation.

Image: Installed fan showcasing key features.

6. Operating Instructions

Your ocioc ceiling fan is operated using the included remote control.

6.1 Remote Control Functions

  • Power On/Off: Turns the fan and light on or off.
  • Fan Speed: Select from 6 fan speeds (1-2: Soft Wind, 3-4: Comfortable Wind, 5-6: Cool Wind).
  • Timer Function: Set the fan to turn off after 1, 2, or 4 hours.
  • Light On/Off: Controls the integrated LED light.
  • Color Temperature Adjustment: Cycle through 3 color temperatures (3000K Warm Light, 4000K Natural Light, 6500K Cool White).
  • Brightness Dimming: Adjust light brightness from 10% to 100%.
  • Reverse Function: Changes the direction of blade rotation for summer or winter mode.
Image illustrating the 3-color temperature options (3000K, 4000K, 6500K) and 10%-100% smooth dimmable brightness for the fan's LED light.

Image: Adjustable light color temperature and dimming.

6.2 Reversible DC Motor

The fan's reversible motor allows for year-round use:

  • Summer Mode (Counter-clockwise): Creates a downward airflow, producing a cooling effect.
  • Winter Mode (Clockwise): Creates an upward airflow, circulating warm air near the ceiling for even heat distribution.
Diagram showing the reversible DC motor function, with arrows indicating counter-clockwise rotation for summer mode (downward airflow) and clockwise rotation for winter mode (upward airflow).

Image: Reversible motor function for seasonal comfort.

6.3 Memory Function

The fan's lighting system includes a memory function. To save your preferred light color temperature, set the desired color and leave it on for at least 7 seconds. Then, turn off the light for another 7 seconds. The fan will recall this setting when the light is turned on again.

7. Maintenance

Regular maintenance ensures optimal performance and extends the life of your fan.

  • Cleaning: To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
  • Blade Cleaning: The ABS fan blades are designed for effortless cleaning. Gently wipe them to remove dust.
  • Tightness Check: Periodically check all screws and connections for tightness.

8. Troubleshooting

If you experience issues with your fan, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Fan does not startNo power; Loose wiring; Remote control battery low.Check circuit breaker; Verify all wire connections; Replace remote battery.
Fan makes noiseLoose screws; Blades unbalanced; Motor issue.Tighten all screws; Ensure blades are properly installed and balanced; Contact support if motor noise persists.
Light does not workLoose wiring; LED driver issue; Remote control battery low.Check light kit wiring; Replace remote battery; Contact support if LED light remains unresponsive.
Remote control not workingBattery low/dead; Remote not paired (if applicable); Obstruction.Replace battery; Refer to remote pairing instructions (if provided separately); Ensure clear line of sight to receiver.
Image showing a person sleeping peacefully with the ocioc ceiling fan operating quietly in the background, illustrating its low noise level (below 30dB) and timer settings (2H/4H/8H).

Image: Quiet operation for undisturbed sleep.

9. Warranty and Support

ocioc is committed to customer satisfaction. Your ceiling fan comes with the following:

  • 5-Year Worry-Free Warranty: Covers defects in materials and workmanship for five years from the date of purchase.
  • Lifetime Motor Replacement Service: The DC motor is covered for its lifetime.
  • Free Accessory Replacements: Should any accessories be damaged, free replacements are offered within 5 years.

For any questions, concerns, or to claim warranty service, please contact ocioc customer support. Refer to your purchase documentation for specific contact details.

© 2023 ocioc. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.