EVGATSAUTO USB Heated Vest User Manual

1. Introduction

Thank you for choosing the EVGATSAUTO USB Heated Vest. This vest is designed to provide warmth and comfort in cold weather conditions, utilizing carbon fiber heating elements to deliver consistent heat to key body areas. Please read this manual thoroughly before using the product to ensure safe and optimal performance.

2. Safety Information

To prevent injury or damage to the product, always follow these safety guidelines:

• Do not use the vest if it is wet or damp.
• Do not use the vest if the heating elements or wiring appear damaged.
• Do not use the vest while sleeping.
• Do not use the vest with infants, children, or individuals who are unable to operate the controls or understand the instructions.
• Consult a physician before use if you have a medical condition, are pregnant, or have a pacemaker.
• Always disconnect the power bank before cleaning or storing the vest.
• Do not modify the vest or its heating system.
• Use only power banks with a USB output of 2A or 2.4A.

3. Product Overview

The EVGATSAUTO Heated Vest is designed for comfort and warmth, featuring a lightweight, quilted design and carbon fiber heating units.

Key Features:

• Carbon Fiber Heating Unit: Generates consistent heat for 6 core body parts: neck, back, abdomen, and waist.
• 3 Heating Levels: Adjustable heat settings (Low, Medium, High) for personalized comfort.
• USB Power Supply: Compatible with 10000mAh power banks (not included) with 2A or 2.4A USB output.
• Comfortable Design: Quilted, lightweight, and fine lining for unrestricted movement. Features a zipper closure.

4. Setup

Before using your heated vest, follow these steps:

1. Charge Power Bank: Ensure your 10000mAh power bank (not included) is fully charged.
2. Locate USB Cable: Find the USB cable located inside the vest's pocket.
3. Connect Power Bank: Connect the USB cable from the vest to the output port of your charged power bank.
4. Secure Power Bank: Place the power bank securely in the designated pocket.

The vest is now ready for operation.

5. Operating Instructions

Follow these steps to operate your heated vest:

1. Power On: Press and hold the power button (usually located on the chest area) for 3-5 seconds until the indicator light illuminates. The vest will typically start on the high heat setting (red light).
2. Adjust Heat Level: Briefly press the power button to cycle through the heating levels:
   • High (Red Light): Provides maximum heat. (Approx. 3 hours with 10000mAh battery)
   • Medium (White Light): Provides moderate heat. (Approx. 5 hours with 10000mAh battery)
   • Low (Blue Light): Provides gentle heat. (Approx. 7 hours with 10000mAh battery)
3. Power Off: Press and hold the power button again for 3-5 seconds until the indicator light turns off. Disconnect the power bank when not in use.

6. Maintenance

Proper care will extend the life of your heated vest:

• Disconnect Power: Always disconnect the power bank before cleaning.
• Washing: Hand wash or machine wash the heated vest in a laundry bag. Use cold water and a mild detergent.
• Drying: Do not wring. Place the vest in a well-ventilated area to air dry completely before storage or next use.
• Do Not: Do not bleach, iron, or dry clean the vest.
• Storage: Store the vest in a cool, dry place when not in use.

7. Troubleshooting

If you encounter issues with your heated vest, refer to the following common problems and solutions:

8. Specifications

9. Warranty & Support

For warranty information or technical support, please contact EVGATSAUTO customer service through the retailer where the product was purchased. Please retain your proof of purchase for warranty claims.