Lamshaw 7055b466-ddd1-4c18-9412-cc9944548ef0
User Manual
Lamshaw Magnetic USB Charging Cable for Deeprio TGW101 Smart Watch
Introduction
Thank you for choosing the Lamshaw Magnetic USB Charging Cable. This product is specifically designed to provide efficient and safe charging for your Deeprio TGW101 1.83" Smart Watch. This manual provides essential information on setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your charging cable.
Figure 1: Two Lamshaw Magnetic USB Charging Cables (Black)
Safety Information
- Do not expose the charging cable to water or excessive moisture.
- Avoid extreme temperatures.
- Do not attempt to disassemble or modify the cable.
- Ensure the charging contacts are clean and free of debris before connecting.
- This charger includes built-in short-circuit protection, overvoltage protection, overcurrent protection, over-charging protection, and high-temperature protection.
Figure 2: Built-in Protection Features
Setup
The Lamshaw Magnetic USB Charging Cable is designed for simple plug-and-play setup.
- Unpack the Cable: Carefully remove the charging cable from its packaging.
- Connect to Power Source: Insert the USB-A end of the charging cable into a compatible USB power source. This can be a wall charger (5V/1A recommended), a power bank, a computer, or a laptop.
- Prepare Smart Watch: Ensure your Deeprio TGW101 Smart Watch is clean around the charging contacts.
Figure 3: Compatible Charging Sources
Operating Instructions
To charge your Deeprio TGW101 Smart Watch:
- Align the Magnetic Connector: Bring the magnetic charging end of the cable close to the charging contacts on the back of your Deeprio TGW101 Smart Watch. The magnets will automatically align the connector correctly.
- Verify Connection: Ensure the magnetic connection is firm and the charging icon appears on your smartwatch screen. If the magnets repel, the connection is incorrect, and the device will not charge. Re-orient the magnetic connector until it attracts properly.
- Charging Time: A full charge typically takes approximately 2.5 hours when using a 1A output current.
- Disconnect: Once charging is complete, gently pull the magnetic connector away from the smartwatch.
Figure 4: Smart Watch Connected for Charging
Figure 5: Magnetic Charging Interface Guidance
Figure 6: Approximate Charging Time
Maintenance
Proper maintenance ensures the longevity and performance of your charging cable.
- Cleaning: Use a soft, dry cloth to wipe the cable and magnetic contacts. Do not use abrasive cleaners or solvents.
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. The flexible PVC cable is easy to roll and convenient for storage.
- Handling: Avoid sharp bends or excessive pulling on the cable, especially near the connectors.
Figure 7: Cable Construction and Features
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Smartwatch not charging. | Incorrect magnetic alignment. | Re-orient the magnetic connector until it attracts firmly to the smartwatch charging contacts. |
| Smartwatch not charging. | Dirty charging contacts on smartwatch or cable. | Clean the charging contacts on both the smartwatch and the cable with a soft, dry cloth. |
| Smartwatch not charging. | Faulty USB power source. | Try connecting the USB-A end of the cable to a different USB port or power adapter. |
| Slow charging. | Low output current from power source. | Ensure your USB power source provides at least 1A output for optimal charging speed. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Lamshaw |
| Model Number | 7055b466-ddd1-4c18-9412-cc9944548ef0 |
| Compatible Devices | Deeprio TGW101 1.83" Smart Watch |
| Connector Type | USB-A to Magnetic Pogo Pin |
| Cable Type | USB Charging Cable |
| Special Feature | Magnetic Connection, Built-in Protection IC (Short-circuit, Overvoltage, Overcurrent, Over-charging, High Temperature) |
| Number of Pins | 5 |
| Cable Length | Approximately 3.3 feet (1 meter) |
| Material | ABS+PC, Flexible PVC Cable, Pure Copper Probe, Gold-plated Pogo Pins |
| Color | Black |
| Product Dimensions | 0.5 x 0.5 x 0.5 inches (approximate, for connector) |
| Item Weight | 1.6 ounces |
| Package Contents | 2 x Lamshaw Magnetic USB Charging Cables |
Warranty and Support
For any questions, concerns, or support regarding your Lamshaw Magnetic USB Charging Cable, please contact the seller or manufacturer through the platform where the purchase was made. Please refer to your purchase details for specific warranty information.
Manufacturer: lamshaw
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.