Introduction
Thank you for choosing the Lamshaw Magnetic USB Replacement Charging Cable. This manual provides essential information for the proper setup, operation, and maintenance of your charging cable, ensuring safe and efficient charging for your Deeprio TGW101 1.83" Smart Watch.
Image: The Lamshaw Magnetic USB Replacement Charging Cable in use with a Deeprio TGW101 Smart Watch, highlighting its magnetic connection and the overall product design.
Setup
To begin charging your Deeprio TGW101 Smart Watch, follow these simple steps:
- Connect to Power Source: Insert the standard USB-A end of the charging cable into a compatible USB power source. This can be a computer USB port, a laptop, a power bank, or a wall charger with a USB output. Ensure the power source provides a stable 5V output.
- Connect to Smart Watch: Align the magnetic charging end of the cable with the charging contacts on the back of your Deeprio TGW101 Smart Watch. The magnets will automatically attract the cable to the correct position.
- Verify Connection: Once connected, your smartwatch should indicate that it is charging. If the magnets repel, simply flip the magnetic end of the cable 180 degrees and try again until attraction occurs.
Image: The USB end of the charging cable can be connected to a variety of common USB power sources for convenience.
Image: Proper magnetic alignment is crucial for charging. Ensure the magnets attract, not repel, for a secure connection.
Operating
The Lamshaw Magnetic USB Replacement Charging Cable is designed for simple and efficient operation.
- Charging Process: Once properly connected, the cable will deliver power to your smartwatch. The smartwatch's screen will typically display a charging indicator.
- Charging Time: A full charge for your Deeprio TGW101 Smart Watch typically takes approximately 2.5 hours when connected to a 1A output current USB power source. Charging times may vary depending on the power source and the watch's battery level.
- Safety Features: The charger includes a built-in Short-circuit Protection IC to prevent overvoltage and overcurrent. In case of a short-circuit, the protection IC will automatically cut off the circuit, ensuring safety even if the charger remains plugged in after charging is complete.
Image: The charging process is efficient, typically taking 2.5 hours for a full charge when using a 1A output current.
Image: The charging cable incorporates multiple safety protections for reliable and secure charging.
Maintenance
To ensure the longevity and optimal performance of your charging cable, follow these maintenance guidelines:
- Cleaning: Gently wipe the cable and magnetic contacts with a soft, dry cloth to remove dust or debris. Avoid using harsh chemicals or abrasive materials.
- Storage: The cable features a flexible PVC design, making it easy to roll and store. When not in use, coil the cable neatly to prevent kinks or damage. Store it in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid pulling the cable by the cord when disconnecting. Always grasp the plug or magnetic connector firmly.
Image: The cable's durable and flexible design allows for convenient storage and long-term use.
Troubleshooting
If you encounter issues with your charging cable, refer to the following common troubleshooting tips:
- Smart Watch Not Charging:
- Ensure the USB end is securely plugged into a working power source.
- Check the magnetic connection to the smartwatch. If the magnets repel, flip the magnetic connector 180 degrees.
- Try a different USB power source (e.g., a different wall adapter or computer USB port).
- Inspect the charging contacts on both the cable and the smartwatch for any obstructions or damage.
- Slow Charging:
- Ensure your USB power source provides sufficient output (ideally 1A or more). Some computer USB ports may have lower power output.
- Avoid using the smartwatch while it is charging, as this can slow down the charging process.
- Magnetic Repulsion:
- This is normal if the polarity is incorrect. Simply rotate the magnetic connector 180 degrees until it attracts firmly to the smartwatch.
Specifications
| Product Name | Lamshaw Magnetic USB Replacement Charging Cable |
| Compatible Device | Deeprio TGW101 1.83" Smart Watch |
| Connectivity Technology | USB |
| Connector Type | USB-A (input), Magnetic (output) |
| Cable Length | 3.3 feet (1 meter) |
| Color | Black |
| Special Features | Magnetic, Travel-friendly, Built-in Short-circuit Protection IC (Over-Current, Over-Voltage, Over-Charging, High Temperature Protection) |
| Approx. Charging Time | 2.5 hours (with 1A output current) |
| Product Dimensions | 0.5 x 0.5 x 0.5 inches (cable dimensions are approximate) |
| Item Weight | 0.634 ounces |
Warranty
Specific warranty information for this product may vary. Please refer to the product packaging or the manufacturer's official website for detailed warranty terms and conditions.
Support
For technical assistance, product inquiries, or support, please contact the manufacturer, Lamshaw, through their official customer service channels. Contact information can typically be found on the product packaging or their official website.