1. Introduction
This manual provides essential information for the safe and effective use of your SPANN Battery Replacement, specifically designed for Autec LK NEO devices and compatible with models MHM03 and R0BATT00E11A0. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
2. Safety Information and Warnings
WARNING: Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to the battery or device.
- DO NOT ATTEMPT TO DISASSEMBLE, OPEN OR SERVICE THE BATTERY PACK. This battery pack is a sealed unit.
- REPLACE ONLY WITH THE BATTERY PACK DESIGNATED FOR THIS PRODUCT. Ensure the replacement battery matches the specifications of your original battery and device.
- DO NOT CRUSH, PUNCTURE, SHORT EXTERNAL CONTACTS OR DISPOSE OF IN FIRE OR WATER. Mishandling can lead to explosion, fire, or leakage.
- DO NOT STORE ABOVE 60°C (140°F). High temperatures can degrade battery performance and pose a safety risk.
- Keep the battery away from children and pets.
- In case of leakage, avoid contact with skin and eyes. If contact occurs, rinse immediately with plenty of water and seek medical advice.
This battery features built-in protection against over-charge, over-discharge, over-heat, over-current, and short-circuit, enhancing its safety and longevity.
3. Product Overview and Specifications
Figure 3.1: Front view of the SPANN Battery Replacement.
Figure 3.2: Angled view of the battery, highlighting the product label.
Figure 3.3: Close-up of the battery's information label, showing model and specifications.
| Feature | Specification |
|---|---|
| Model Number | CS-ALK003BL |
| Compatible Models | Autec LK NEO, MHM03, R0BATT00E11A0 |
| Battery Type | Ni-MH (Nickel-Metal Hydride) |
| Voltage | 3.6V |
| Capacity | 500mAh / 1.80Wh |
| Dimensions (approx.) | 77.06 x 48.04 x 11.00mm (3.03 x 1.89 x 0.43 inches) |
| Weight (approx.) | 89g (3.14 ounces) |
4. Setup (Battery Installation)
This battery is designed as a direct replacement for compatible Autec LK NEO devices. Always refer to your device's original instruction manual for specific battery replacement procedures.
- Power Off Device: Ensure your device is completely powered off and disconnected from any power source before attempting battery replacement.
- Locate Battery Compartment: Identify the battery compartment on your Autec LK NEO device. This is typically on the back or underside.
- Remove Old Battery: Carefully open the compartment and remove the old battery. Note its orientation.
- Insert New Battery: Insert the SPANN replacement battery into the compartment, ensuring it is correctly oriented according to the device's markings. Do not force the battery.
- Secure Compartment: Close and secure the battery compartment cover.
- Initial Charge: It is recommended to fully charge the new battery before its first use.
What's in the Box: 1 x SPANN Battery Replacement (Model CS-ALK003BL).
5. Operating (Charging and Usage)
The SPANN Ni-MH battery is designed for reliable performance. Follow your device's charging instructions.
- Charging: Use only the charger supplied with or approved for your Autec LK NEO device. Overcharging with an incompatible charger can damage the battery.
- No Memory Effect: Ni-MH batteries generally do not suffer from the "memory effect" as much as older Ni-Cd batteries. You can charge the battery whenever convenient without needing to fully discharge it first.
- Optimal Performance: For best results, avoid completely draining the battery frequently. Partial discharges and charges are generally fine.
6. Maintenance
Proper maintenance extends the life of your battery.
- Storage: If storing the battery for an extended period, store it in a cool, dry place, ideally at room temperature (20-25°C or 68-77°F) and at about 50% charge. Avoid extreme temperatures.
- Cleaning: Keep the battery contacts clean. Use a dry, soft cloth to wipe away any dust or debris. Do not use liquids or abrasive cleaners.
- Disposal: Do not dispose of batteries in household waste. Ni-MH batteries contain recyclable materials. Dispose of the battery responsibly at a designated recycling facility. Consult your local regulations for proper disposal.
7. Troubleshooting
If you encounter issues with your battery, consider the following common solutions:
- Battery Not Charging:
- Ensure the battery is correctly inserted into the device and the charger.
- Verify that the charger is functioning correctly and connected to a power source.
- Check for any visible damage to the battery or charger contacts.
- Short Battery Life:
- Ensure the battery is fully charged before use.
- Check if the device itself is consuming excessive power.
- Battery capacity naturally degrades over time with repeated charge cycles.
- Device Not Powering On:
- Confirm the battery is fully charged and properly installed.
- Test the device with another known-good battery if available.
- If the issue persists, the problem may lie with the device itself, not the battery.
If troubleshooting steps do not resolve the issue, please contact customer support.
8. Warranty and Support
Your SPANN Battery Replacement comes with a 365-day warranty from the date of purchase. This warranty covers manufacturing defects and issues arising from normal use.
Our products have passed strict quality inspection. If you have any questions, concerns, or require technical assistance, please do not hesitate to contact us. Provide your purchase details and a description of the issue for prompt support.
Manufacturer: SPANN
Date First Available: August 28, 2023