onerbl OND19AAA12

onerbl AC Adapter User Manual for ONN OND19AAA12 CD Mini Stereo System Player

Introduction

This manual provides essential instructions for the safe and effective use of your onerbl AC Adapter, specifically designed as a compatible replacement power supply for the ONN OND19AAA12 CD Mini Stereo System Player. Please read this manual thoroughly before use and retain it for future reference.

onerbl AC Adapter with power cord coiled

Image: The onerbl AC Adapter, showing the main unit with a two-prong plug and the attached DC output cable with its barrel connector, coiled for storage.

Safety Information

  • Ensure the adapter is used with compatible devices only. This adapter is specifically for the ONN OND19AAA12 model.
  • Do not expose the adapter to water, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the adapter to strong impacts.
  • Unplug the adapter from the power outlet when not in use for extended periods.
  • Do not attempt to open or repair the adapter. Refer to qualified service personnel.

Setup Instructions

  1. Verify Compatibility: Confirm that your device is the ONN OND19AAA12 CD Mini Stereo System Player. This adapter is not designed for other models.
  2. Connect to Device: Locate the DC input port on your ONN OND19AAA12 stereo system. Carefully insert the barrel connector of the onerbl AC Adapter into this port. Ensure a snug fit.
  3. Connect to Power Outlet: Plug the two-prong AC plug of the adapter into a standard AC 100-240V wall outlet.
  4. Power On: Once connected, your stereo system should be ready for operation. Refer to your stereo system's manual for specific power-on procedures.
AC adapter plugged into a power strip next to a laptop

Image: The onerbl AC Adapter plugged into a power strip, demonstrating a typical usage scenario in an office or home environment.

Operating Instructions

The onerbl AC Adapter functions as a direct power source for your ONN OND19AAA12 CD Mini Stereo System Player. Once properly connected, it provides the necessary DC power for the device to operate. There are no user-adjustable settings on the adapter itself.

  • Always ensure the adapter is securely plugged into both the wall outlet and the device.
  • If the device does not power on, check all connections and the power outlet.

Maintenance

  • Cleaning: Disconnect the adapter from the power source and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
  • Cable Care: Regularly inspect the power cord for any signs of damage, such as fraying or cuts. If damage is observed, discontinue use immediately and replace the adapter.

Troubleshooting

ProblemPossible CauseSolution
Device does not power on.Adapter not properly connected.
Power outlet is not active.
Device incompatibility.
Ensure both ends of the adapter are securely plugged in.
Test the power outlet with another device.
Confirm your device is the ONN OND19AAA12.
Adapter feels unusually hot.Overload or internal fault.Immediately unplug the adapter from the wall and the device. Allow it to cool. If the issue persists, discontinue use.
Visible damage to cable or adapter.Physical damage.Discontinue use immediately to prevent electrical hazards. Replace the adapter.
Diagram showing smart chip protections: short-circuit, over-voltage, over-current

Image: An illustration highlighting the adapter's built-in safety features, including protection against short-circuits, over-voltage, and over-current, ensuring electrical safety.

Specifications

  • Model: OND19AAA12 Compatible AC Adapter
  • Input: AC 100-240V, 50/60Hz (Worldwide AC Input)
  • Output: (Specific output voltage/amperage not provided in product data)
  • Protection Features: Over Voltage Protection, Over Heat Protection, Short-circuit Protection, Over-current Protection.
  • Cable Length: Approximately 76 inches (1.93 meters)
  • Dimensions (Adapter Unit): Approximately 2.6 inches (length) x 1.6 inches (width) x 1.2 inches (height)
  • Brand: onerbl
  • Manufacturer: Shenzhen Waweis Technology Co., Ltd
Diagram showing dimensions of the AC adapter and cable length

Image: A visual representation of the AC adapter's physical dimensions (length, width, height) and the total cable length, providing precise measurements for user reference.

Diagram showing internal copper wire and PVC jacket of the cable

Image: An illustration detailing the durable design of the power cable, highlighting its copper wire core and protective PVC jacket for enhanced longevity and safety.

Warranty and Support

For warranty information or technical support regarding your onerbl AC Adapter, please refer to the seller or manufacturer's official channels. Specific warranty terms may vary depending on the point of purchase.

For further assistance, please contact the retailer where the product was purchased.

Documents - onerbl – OND19AAA12

no relevant documents