1. Product Overview
The Rust-Oleum Stops Rust Protective Enamel with Custom Spray 5-in-1 technology offers a versatile spray paint experience. This advanced formula provides enhanced corrosion resistance and color retention, making it suitable for various projects. The innovative Custom Spray 5-in-1 dial allows users to select from five distinct spray patterns for precise application.
Image: Rust-Oleum Stops Rust Custom Spray 5-in-1 Flat Brown Spray Paint (6-pack).
Key Features:
- Custom Spray 5-in-1 Dial: Offers five distinct spray patterns for ultimate control and superior results.
- Advanced Oil-Based Formula: Delivers 30% greater corrosion resistance and enhanced color retention compared to standard Stops Rust formulas.
- Quick Drying: Dries to touch in 2-4 hours.
- Coverage: Each 12 oz can covers approximately 6-10 sq. ft.
- 360° Any-Angle Spray Technology: Allows for effortless application from any angle.
- Flat Finish: Minimizes surface imperfections for a smooth appearance.
2. Safety Information
Always prioritize safety when using spray paint. This product is flammable and should be used with caution.
- Ventilation: Use in a well-ventilated area. Avoid breathing vapors.
- Eye Protection: Wear safety glasses or goggles to protect eyes from paint mist.
- Skin Protection: Wear gloves to prevent skin contact.
- Respiratory Protection: If ventilation is inadequate, wear an appropriate respirator.
- Flammability: Keep away from heat, sparks, open flames, and hot surfaces. Do not smoke while using.
- Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Disposal: Dispose of empty cans and unused paint according to local regulations.
Image: Recommended safety and preparation items.
3. Preparation and Setup
Surface Preparation:
Proper surface preparation is crucial for optimal adhesion and finish quality. Ensure the surface is clean, dry, and free of loose rust, dirt, oil, and grease. Lightly sand glossy surfaces for better adhesion. For bare metal or wood, a primer may be recommended for best results and extended durability.
Image: Paint adhesion on wood and metal surfaces.
Can Preparation:
- Shake the can vigorously for one minute after the mixing ball begins to rattle. Continue shaking occasionally during use.
- Test spray on a scrap piece of material to ensure proper color and spray pattern.
4. Operating Instructions: Custom Spray 5-in-1 Dial
The Custom Spray 5-in-1 dial provides five unique spray patterns, allowing you to adapt to different project needs. Rotate the dial on the top of the can to select the desired spray pattern.
Image: Custom Spray 5-in-1 Dial Features.
Spray Patterns:
1. High Output
Ideal for large, rounded surfaces. Provides a wide, fast-covering spray.
High Output in use.
2. Standard
A comfortable and timeless spray experience, suitable for general applications.
Standard spray in use.
3. Low Output
Excellent for detailed work, corners, and hard-to-reach areas, minimizing drips and runs.
Low Output spray in use.
4. Vertical Fan
Great for long, flat surfaces, providing an even vertical spray pattern.
Vertical Fan application example.
5. Horizontal Fan
Ideal for tall, flat surfaces, delivering an even horizontal spray pattern.
Horizontal Fan application example.
Image: Visual representation of spray patterns.
Hold the can upright 10-16 inches from the surface and spray in a steady, back-and-forth motion, slightly overlapping each stroke. Apply two or more light coats a few minutes apart rather than one heavy coat to avoid drips and runs.
5. Maintenance and Storage
Nozzle Cleaning:
After each use, turn the can upside down and press the actuator button for 2-3 seconds to clear the valve. This prevents clogging and ensures the nozzle is ready for the next use. If the nozzle clogs, remove and clean it with mineral spirits. Do not insert pins or other objects into the stem.
Storage:
Store the can in a cool, dry, well-ventilated area. Ensure the Custom Spray dial is turned to the "Lock/Off" position before storing. Keep away from direct sunlight, heat sources, and freezing temperatures.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Uneven spray or sputtering | Insufficient shaking; clogged nozzle; low temperature. | Shake can vigorously for 1 minute. Clean nozzle as per maintenance. Warm can to room temperature. |
| Drips or runs | Too much paint applied; can held too close to surface; incorrect spray pattern for task. | Apply lighter, multiple coats. Hold can 10-16 inches from surface. Select a lower output or fan pattern for detailed areas. |
| Poor adhesion | Improper surface preparation (dirty, greasy, or glossy surface). | Ensure surface is clean, dry, and properly sanded. Use a primer if necessary. |
| Nozzle does not work as advertised (e.g., restricted flow drips) | Internal mechanism issue; dried paint in the nozzle. | Ensure the can was inverted and sprayed after previous use. If issue persists after cleaning, the can may be defective. |
7. Product Specifications
| Specification | Detail |
|---|---|
| Brand | Rust-Oleum |
| Model Name | Custom Spray 5-in-1 |
| Model Number | 376857-6PK |
| Color | Flat Brown |
| Finish Type | Flat |
| Size | 12 Ounce (Pack of 6) |
| Item Volume | 12 Fluid Ounces per can |
| Paint Type | Enamel |
| Specific Uses | Interior/Exterior |
| Surface Recommendation | Metal, Wood |
| Special Features | Chip Resistant, Fade Resistant, Fast-Drying, Rust Resistant, Scratch Resistant |
| Full Cure Time | 4 Hours |
| Coverage | 6-10 square feet per can |
| Item Weight | 6.12 pounds (for 6-pack) |
| Product Dimensions | 8.38 x 5.69 x 8.38 inches (for 6-pack) |
Image: Rust-Oleum Sheen Guide.
Image: Enhanced corrosion resistance and color retention.
8. Warranty and Support
For detailed product information, safety data sheets, or specific warranty inquiries, please refer to the official Rust-Oleum resources.
A user guide is available for download:
For further assistance, visit the official Rust-Oleum website or contact their customer support.
