1. Introduction
This manual provides essential information for the installation, operation, and maintenance of the Growatt MIN 3000TL-XH Single-Phase Hybrid Inverter. The Growatt MIN 3000TL-XH is a single-phase hybrid inverter designed for both grid-tied operation and battery storage, offering a maximum output power of 3000W. It features two independent MPPT controllers, allowing for flexible solar panel configurations, and is compatible with Growatt ARK XH batteries ranging from 5.12 to 17.92 kW. Its compact, IP65-rated design makes it suitable for outdoor installation in private or commercial settings.
2. Safety Information
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Installation must be performed by qualified personnel only.
- Ensure the inverter is disconnected from all power sources (DC and AC) before performing any maintenance or service.
- Do not open the inverter casing. There are no user-serviceable parts inside.
- The inverter is IP65 rated for outdoor use, but avoid direct exposure to extreme weather conditions.
- Ensure proper grounding of the inverter.
- Keep children and unauthorized persons away from the inverter.
3. Setup and Installation
The Growatt MIN 3000TL-XH inverter is designed for easy installation. Follow these steps for proper setup.
3.1 Unpacking and Inspection
Carefully unpack the inverter and inspect it for any signs of damage during transit. Report any damage to your supplier immediately.
3.2 Mounting the Inverter
Choose a suitable mounting location, preferably on a solid wall, away from direct sunlight and sources of heat. Ensure adequate ventilation around the unit.
Image: Growatt MIN 3000TL-XH Inverter. This image displays the front of the inverter, highlighting its sleek, compact design and the user interface panel.
3.3 Electrical Connections
Connect the DC input from the solar panels to the MPPT inputs, ensuring correct polarity. Connect the AC output to the grid. If using batteries, connect the Growatt ARK XH battery system to the designated battery terminals. All connections must comply with local electrical codes.
- DC Input: Connect solar panel strings to the two independent MPPT inputs.
- AC Output: Connect to the single-phase grid (phase and neutral).
- Battery Connection: For hybrid operation, connect compatible Growatt ARK XH batteries. Communication between the inverter and battery is via data cable, no separate gateway is required.
- Grounding: Ensure the inverter is properly grounded.
4. Operating the Inverter
Once installed, the Growatt MIN 3000TL-XH inverter will automatically begin operation when sufficient solar power is available and grid connection is established.
4.1 Display and Controls
The inverter features a touch button and an OLED display for monitoring system status and adjusting settings. Refer to the on-screen menu for detailed information.
4.2 Operating Modes
The MIN 3000TL-XH operates as a hybrid inverter, capable of:
- Grid-tied operation: Feeding excess solar power to the grid.
- Battery charging: Storing excess solar power in connected batteries.
- Battery discharging: Supplying power from batteries to loads or the grid.
- Self-consumption: Prioritizing power usage from solar and batteries for local loads.
4.3 Export Control
The inverter supports export control functionality, allowing you to limit the amount of power fed back to the grid, if required by local regulations.
5. Maintenance
The Growatt MIN 3000TL-XH inverter requires minimal maintenance. Regular checks ensure optimal performance and longevity.
- Visual Inspection: Periodically check the inverter and all connections for any visible damage, corrosion, or loose wiring.
- Cleaning: Keep the inverter's cooling fins and vents free from dust and debris to ensure proper heat dissipation. Use a soft, dry cloth for cleaning.
- Performance Monitoring: Regularly monitor the inverter's performance via the display or a connected monitoring system to ensure it is operating efficiently.
- Firmware Updates: Check with Growatt support or your installer for any available firmware updates to ensure the inverter has the latest features and optimizations.
6. Troubleshooting
This section provides guidance for common issues. For more complex problems, contact qualified service personnel.
| Problem | Possible Cause | Solution |
|---|---|---|
| Inverter not producing power | No DC input (solar panels), AC grid disconnected, Inverter fault | Check solar panel connections and sunlight. Verify AC grid connection. Check inverter display for error codes. |
| Low power output | Insufficient sunlight, dirty solar panels, shading, MPPT issue | Ensure panels are clean and free from shading. Check MPPT input voltages on display. |
| Error message on display | Internal fault, connection issue, overvoltage/undervoltage | Note the error code and consult the full Growatt manual or contact technical support. |
7. Specifications
Key technical specifications for the Growatt MIN 3000TL-XH Single-Phase Hybrid Inverter.
| Feature | Value |
|---|---|
| Model | MIN 3000TL-XH |
| Maximum Efficiency | 98.2% |
| MPPT Controllers | 2 independent |
| Recommended Max DC Panel Power | 6000 W |
| Max Voltage | 500 V |
| Start-up Voltage | 100 V |
| Operating Voltage Range | 70-500 V |
| Nominal Voltage | 360 V |
| Overvoltage Protection | SPD Type II continuous |
| Display | Touch button and OLED display |
| Ingress Protection | IP65 |
| Compatible Batteries | Growatt ARK XH (5.12 to 17.92 kW) |
8. Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official Growatt website. Keep your purchase receipt as proof of purchase.
For technical support, troubleshooting assistance beyond this manual, or spare parts, please contact your authorized Growatt dealer or Growatt customer service. Provide your product model and serial number when seeking support.
Manufacturer: GROWATT
Model Number: MIN 3000TL-XH
