Introduction
Thank you for choosing the NCVI Double Electric Breast Pump 8122-1. This pump is designed to provide efficient and comfortable milk expression with its hospital-grade suction, multiple modes, and user-friendly features. It includes 4 modes and 9 suction levels to meet individual needs, an LED touchscreen for easy operation, and a quiet design for discreet use. All components are made from food-grade, BPA-free materials, ensuring safety for both mother and baby.
Safety Information
Please read all instructions before using the breast pump. Keep this manual for future reference.
- All components that come into contact with breast milk are made of food-grade, BPA-free materials.
- Always inspect the pump parts for damage before each use. Replace any damaged parts immediately.
- Do not immerse the motor unit in water or other liquids.
- Keep the device out of reach of children.
- Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
Product Components
The NCVI Double Electric Breast Pump 8122-1 package includes the following items:
Image: Overview of all included components.
- Pump Body (x2)
- Motor Unit (x1)
- Air Tube (x2)
- Diaphragm (x2)
- Upper Cover (x2)
- Flange 24mm (x2)
- Milk Bottle (x2)
- Duckbill Valve (x4)
- Flange Insert 21mm (x2)
- Charging Cord (Type-C) (x1)
- Nipple (x2)
- Breastmilk Storage Bag (x10)
Setup and Assembly
Follow these steps to assemble your breast pump before first use:
- Clean and Sterilize: Before initial use, disassemble and clean all parts that come into contact with breast milk (pump bodies, flanges, duckbill valves, milk bottles, nipples) using warm soapy water. Rinse thoroughly and sterilize according to manufacturer guidelines (e.g., boiling, steam sterilizer). The motor unit and air tubes should not be washed.
- Assemble Pump Body: Insert the duckbill valve into the bottom of the pump body. Place the diaphragm onto the pump body, ensuring a secure seal. Attach the upper cover.
- Attach Flange: Connect the 24mm flange to the pump body. If needed, insert the 21mm flange insert into the 24mm flange for a comfortable fit.
- Connect Milk Bottle: Screw the milk bottle onto the bottom of the assembled pump body.
- Connect Air Tube: Attach one end of the air tube to the connector on the upper cover of the pump body. Connect the other end of the air tube to one of the ports on the motor unit. For double pumping, repeat this for the second pump body and the other motor port.
- Charge Motor Unit: Ensure the motor unit is fully charged before its first use. Connect the Type-C charging cable to the motor unit and a suitable power source (e.g., adapter, power bank, computer). The LED display will indicate charging status.
Image: Fully assembled breast pump ready for use.
Image: Charging options for the rechargeable battery.
Video: A seller demonstrates unboxing and assembly of the NCVI 8122 breast pump, showing how to connect the components and prepare for use.
Operating Instructions
The NCVI breast pump features an intuitive LED touchscreen for easy control.
Image: Detailed view of the LED touchscreen controls.
- Power On/Off: Press and hold the power button (usually indicated by a power symbol) to turn the pump on or off.
- Select Mode: Tap the 'M' button to cycle through the 4 available pumping modes: Massage Mode, Multitronic Suction Mode, Suck Simulate Mode, and Express Mode. Each mode has a distinct pattern to optimize milk flow.
- Adjust Suction Level: Use the '+' and '-' buttons to increase or decrease the suction intensity. There are 9 adjustable levels to find your most comfortable and effective setting.
- Pause/Resume: Lightly tap the power button to pause or resume your pumping session.
- Automatic Shut-off: The pump features a 30-minute automatic shut-off function for convenience and safety.
- Memory Function: The pump remembers your last used settings for quick startup.
Image: Visual representation of the 4 modes and 9 levels.
Image: Flange size guide and ergonomic design.
Cleaning and Maintenance
Proper cleaning and maintenance are essential for hygiene and optimal pump performance.
- After Each Use: Disassemble all parts that come into contact with breast milk (flanges, pump bodies, duckbill valves, milk bottles, nipples). Wash them immediately in warm, soapy water. Rinse thoroughly with clean water.
- Sterilization: Sterilize these parts regularly by boiling for 5 minutes, using a steam sterilizer, or a dishwasher (top rack only, if dishwasher safe).
- Motor Unit and Air Tubes: The motor unit and air tubes should never be washed or sterilized. Wipe the motor unit with a clean, damp cloth. If milk enters the air tubes, replace them to prevent contamination.
- Drying: Allow all parts to air dry completely on a clean surface or drying rack before reassembling or storing.
Image: Anti-backflow design for hygienic pumping.
Troubleshooting
If you encounter any issues with your NCVI Double Electric Breast Pump, please consider the following:
- No Suction or Weak Suction: Check that all pump parts are correctly assembled and securely connected. Ensure the air tubes are firmly attached to both the pump bodies and the motor unit. Verify that the duckbill valves and diaphragms are not damaged or worn.
- Motor Not Turning On: Ensure the motor unit is fully charged. Connect it to the charging cable and allow sufficient time to charge.
- Milk Backflow into Tubing: This indicates a potential issue with the diaphragm or duckbill valve. Disassemble, clean, and inspect these parts. Replace if damaged.
For further assistance or persistent issues, please contact NCVI customer support.
Specifications
- Model Number: 8122-1
- Product Dimensions: 8.66 x 5.24 x 5.71 inches; 2.16 Pounds
- Battery: 1 A battery required (included), 2200mAh rechargeable battery
- Material: Polypropylene, Silicone (BPA-free, food-grade)
- Power Source: Battery Powered
- Special Features: Adjustable Suction, Double Pump, Ergonomic, Handheld Motor, Painless, Ultra-low noise (as low as 45dB), LED Touchscreen, Memory Function, 30-minute Auto Turn Off
- Flange Sizes Included: 21mm, 24mm
Warranty and Support
The NCVI Double Electric Breast Pump 8122-1 comes with a 1-year warranty. Please retain your proof of purchase for warranty claims. For replacement of battery and motor, you may need to contact the manufacturer directly.
For any questions, concerns, or support regarding your product, please visit the official NCVI website or contact their customer service. Contact information can typically be found on the product packaging or the warranty card included in your box.