Digital Angle Finder Magnetic User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your Coobeast Digital Angle Finder Magnetic. This versatile tool combines the functions of a digital level, angle finder, and laser lines, designed for precision measurement in various applications, including woodworking and home decoration.

Key Features

• Four Sides Strong Magnetic: Equipped with powerful magnets on all four sides for secure attachment to metallic surfaces, ensuring stable and accurate measurements.
• Three-in-One Functionality: Functions as a digital level, angle finder, and features built-in red laser lines (Class II, Output<5mW) for enhanced alignment capabilities.
• High Accuracy & Convenience: Offers 360°/4×90° measurement range with ±0.2° accuracy and 0.05° resolution. The display automatically flips when inverted, and a 'Hold' button allows memorizing values.
• Backlight LCD Display: Features an easy-to-read LCD with backlight for clear visibility in all lighting conditions. IP54 rated for dust and splash resistance.
• Portable & Rechargeable: Compact, palm-sized design with a 400mAh rechargeable battery and Type-C charging interface, offering ultra-long standby time. Includes a black belt loop storage bag for easy transport.

Product Overview

Setup

1. Initial Charge: Before first use, fully charge the device using the provided Type-C charging cable. Connect the cable to the rear-facing charging jack and a compatible USB power source (DC5V 400mA). The power display on the LCD will indicate charging status.
2. Power On: Press the ON/OFF button to turn on the device. The LCD will illuminate.
3. Zeroing: For relative measurements, place the device on a flat, stable surface that will serve as your reference. Press the ZERO button to set the current angle to 0.00°. This establishes a new reference point for subsequent measurements.

Operating Instructions

Button Functions:

• ON/OFF Button:
  • Short press to turn the device ON or OFF.
  • Press once to activate the right-side red laser line.
  • Press twice to activate the left-side red laser line.
  • Press a third time to activate both red laser lines.
  • Press again to turn off the laser lines.
• TILT%/HOLD Button:
  • Short press to hold the current measurement value on the display. Press again to release.
  • Long press to switch between angle (°) and slope (%) readout.
• ZERO Button:
  • Short press to zero out the measured value, enabling relative measurement from any surface.

Measurement Modes:

• Absolute Measurement: When the device is powered on and not zeroed on a specific surface, it measures the absolute angle relative to a true horizontal plane.
• Relative Measurement: After pressing the ZERO button on a reference surface, all subsequent measurements will be relative to that zeroed surface.

Using the Laser Lines:

The built-in laser lines assist in alignment and projection. Activate them using the ON/OFF button as described above. The laser lines are useful for extending a reference line across a surface or for checking alignment over a distance.

Demonstration Video:

Maintenance

• Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the angle finder in its provided storage bag in a dry, cool place away from direct sunlight and extreme temperatures.
• Battery Care: Recharge the battery regularly, even if not in frequent use, to maintain battery health. Avoid fully discharging the battery for extended periods.
• Magnetic Surfaces: Ensure the magnetic surfaces are clean and free of debris to maintain strong adhesion.

Troubleshooting

Specifications

Warranty and Support

Coobeast tools come with quality assurance. If you encounter any problems with your product, please do not hesitate to contact us. We are committed to providing prompt service and support.

For further assistance, please visit the official Coobeast store on Amazon: Coobeast Store