Introduction
Thank you for choosing the LEKATO M02878 Mini Guitar Amplifier. This compact and portable 10W amplifier is designed for daily practice, offering both clean and distortion channels, delay effects, a three-band equalizer, and Bluetooth connectivity. Please read this manual carefully to ensure proper use and to maximize your amplifier's performance.
Safety Information
Please observe the following safety precautions to prevent damage to the product or injury to yourself:
- Do not expose the amplifier to water or excessive moisture.
- Avoid placing the amplifier near heat sources or in direct sunlight.
- Use only the specified charging cable (USB) for recharging the built-in battery.
- Do not attempt to disassemble or modify the amplifier. Refer all servicing to qualified personnel.
- Keep out of reach of children.
Product Overview
Familiarize yourself with the controls and connections of your LEKATO Mini Guitar Amplifier.
Front Panel Controls
Figure 1: Front panel of the LEKATO Mini Guitar Amplifier, showing Input, Volume, Gain, Low, Mid, High EQ knobs, Delay and Distortion effect buttons, Time, Delay, Volume, B.T. (Bluetooth) knobs, and Power button.
- INPUT: 1/4" jack for connecting your guitar.
- VOLUME: Adjusts the overall output volume.
- GAIN: Controls the input sensitivity and amount of overdrive/distortion.
- LOW, MID, HIGH: Three-band equalizer knobs to adjust bass, midrange, and treble frequencies.
- DIST. (Distortion) Button: Toggles between Clean and Distortion channels.
- DELAY Button: Activates or deactivates the delay effect.
- TIME: Adjusts the delay time.
- DELAY: Adjusts the intensity or feedback of the delay effect.
- VOLUME (BT): Adjusts the volume of the Bluetooth audio input.
- B.T. (Bluetooth) Button: Activates Bluetooth pairing mode.
- POWER: Turns the amplifier on or off.
Rear Panel Connections
Figure 2: Rear panel of the LEKATO Mini Guitar Amplifier, showing Aux In, Headphone, and DC-5V ports.
- AUX IN: 1/8" (3.5mm) auxiliary input jack for connecting external audio sources like smartphones or MP3 players.
- HEADPHONE: 1/8" (3.5mm) stereo headphone output jack for silent practice.
- DC-5V: USB charging port for the built-in rechargeable battery.
Speakers
Figure 3: Front view of the LEKATO Mini Guitar Amplifier, highlighting the dual 2x2 inch full-frequency speakers.
The amplifier features two 2x2 inch full-frequency speakers, providing clear and powerful sound despite its compact size.
Setup
Charging the Amplifier
- Connect the provided USB charging cable to the DC-5V port on the rear of the amplifier.
- Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer USB port.
- Observe the charging indicator light:
- Blue light: Battery is fully charged.
- Purple light: Approximately half power remaining.
- Red light: Low battery, please charge promptly.
- A full charge provides up to 6 hours of use.
Connecting Your Guitar
- Ensure the amplifier is powered off.
- Connect one end of a standard 1/4" instrument cable to your guitar's output jack.
- Connect the other end of the instrument cable to the INPUT jack on the front panel of the amplifier.
Bluetooth Pairing
- Turn on the amplifier using the POWER button.
- Press the B.T. button on the front panel. The Bluetooth indicator light will flash, indicating it's in pairing mode.
- On your audio device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "LEKATO AMP" (or similar) from the list of devices to pair.
- Once paired, the Bluetooth indicator light will stop flashing and remain solid. You can now play audio through the amplifier.
- Adjust the Bluetooth audio volume using the VOLUME (BT) knob.
Operating the Amplifier
Basic Operation
- After connecting your guitar, turn on the amplifier using the POWER button.
- Start with the VOLUME and GAIN knobs set to a low position.
- Gradually increase the VOLUME to your desired listening level.
Using Effects and EQ
- Clean/Distortion Channel: Press the DIST. button to toggle between the clean and distortion channels. When the distortion channel is active, you can adjust the amount of distortion using the GAIN knob.
- Delay Effect: Press the DELAY button to activate the delay effect. Use the TIME knob to set the delay interval and the DELAY knob to control the number of repeats (feedback).
- Three-Band EQ: Use the LOW, MID, and HIGH knobs to shape your tone. Turning a knob clockwise increases the respective frequency, while turning it counter-clockwise decreases it.
Using Auxiliary Input and Headphones
- AUX IN: Connect an external audio device to the AUX IN jack using a 3.5mm stereo cable. This allows you to play along with backing tracks. The volume of the auxiliary input is controlled by your external device.
- HEADPHONE: For silent practice, connect a pair of 3.5mm stereo headphones to the HEADPHONE jack. This will mute the amplifier's internal speakers.
Maintenance
- Cleaning: Wipe the amplifier with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the amplifier in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid completely draining the battery frequently. Charge the amplifier regularly, even if not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from amplifier. |
|
|
| Bluetooth not pairing. |
|
|
| Poor sound quality. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | M02878 |
| Output Wattage | 10 Watts |
| Speaker Size | 2 x 2 Inches |
| Channels | Clean, Distortion |
| Effects | Delay |
| Equalizer | 3-Band (Low, Mid, High) |
| Connectivity | Bluetooth 5.0, 1/8" Aux In, 1/8" Headphone Out, 1/4" Guitar Input |
| Power Source | Rechargeable Lithium Ion Battery (1 required, included) |
| Battery Life | Up to 6 hours (after full charge) |
| Product Dimensions | 8.89 x 17.02 x 12.95 cm (3.5 x 6.7 x 5.1 inches) |
| Weight | 848 g (1.87 lbs) |
| Manufacturer | LEKATO |
Figure 4: Dimensions of the LEKATO Mini Guitar Amplifier, showing approximate measurements of 6.5 inches length, 3.3 inches height, and 5.0 inches depth.
Warranty and Support
Warranty information for your LEKATO M02878 Mini Guitar Amplifier is typically provided with your purchase documentation. Please refer to those materials for details regarding warranty coverage and terms.
For technical support, service, or further inquiries, please visit the official LEKATO website or contact their customer service department through the contact information provided with your product or on their website.
