BANTI Electric Standing Desk with Drawers

1. Introduction

This manual provides essential information for the safe and efficient use of your BANTI Electric Standing Desk with Drawers. This ergonomic workstation is designed to enhance your productivity and well-being by allowing seamless transitions between sitting and standing positions.

The desk features a 48-inch whole-piece glass desktop, height adjustability from 27.7 to 46.6 inches, and an integrated drawer with partitioned zones for organized storage. Its electric lift system operates quietly and includes an anti-collision mechanism for safety.

Figure 1: BANTI Electric Standing Desk in a typical setup, showcasing its design and integrated storage.

2. Safety Information

Please read all safety instructions carefully before assembly and use to prevent injury or damage to the product.

• Weight Limit: Do not exceed the maximum weight capacity of 176 lbs (80 kg) on the desktop. Overloading can cause instability and damage.
• Anchoring: Ensure the desk is placed on a stable, level surface. If necessary, consider anchoring the desk to a wall to prevent tipping, especially in households with children or pets.
• Height Adjustment: Exercise caution when adjusting the desk height. Keep hands, feet, and other objects clear of moving parts to avoid pinching or crushing.
• Anti-Collision System: The desk is equipped with an anti-collision system. While this system helps prevent damage, always supervise desk movement and ensure no obstacles are in the path of the desktop.
• Children and Pets: Keep children and pets away from the desk during height adjustments. Do not allow them to play on or around the desk.
• Power Cord: Ensure the power cord is not pinched or damaged. Route cables safely to prevent tripping hazards.
• Liquid Spills: The glass desktop is easy to clean, but avoid excessive liquid spills, especially near electrical components.

Figure 2: Anti-collision technology in action, preventing bumps and scratches.

3. Setup and Assembly

The BANTI Electric Standing Desk is designed for quick and straightforward assembly. All necessary tools are included.

3.1 Unpacking

Carefully remove all components from the packaging. Verify that all parts listed in the packing list are present and undamaged. Keep packaging materials until assembly is complete in case of returns or exchanges.

3.2 Assembly Steps

1. Install the Tabletop and Desk Frame: Place the tabletop upside down on a soft, clean surface to prevent scratches. Attach the desk frame components to the tabletop using the provided screws and tools.
2. Install Desk Feet: Securely attach the desk feet to the bottom of the desk frame. Ensure they are firmly tightened for stability.
3. Connect Power Cords: Connect the motor cables to the control box and then plug the main power cord into a standard electrical outlet.
4. Cable Management: Use the included cable ties or management solutions to organize and secure all cables, preventing tangles and hazards.

Figure 3: Visual guide for the 10-minute quick installation process.

Recommended Assembly Personnel: 2 people are recommended for assembly due to the size and weight of the components.

4. Operating Instructions

Your BANTI Electric Standing Desk features an intuitive control panel for easy height adjustment and memory functions.

Figure 4: Multi-function Control Panel overview.

4.1 Height Adjustment

• Raise Desk: Press and hold the Up Arrow button (▲) to raise the desk to your desired standing height.
• Lower Desk: Press and hold the Down Arrow button (▼) to lower the desk to your desired sitting height.
• Release the button once the desired height is reached. The desk can adjust between 27.7 and 46.6 inches.

4.2 Memory Presets

The desk allows you to save up to three preferred height settings for quick recall.

1. Set a Memory Position: Adjust the desk to your desired height using the Up/Down buttons. Press the "S" (Set) button, then immediately press one of the numbered memory buttons (1, 2, or 3). The display will confirm the setting.
2. Recall a Memory Position: Simply press the corresponding numbered memory button (1, 2, or 3). The desk will automatically move to the saved height.

4.3 USB & Type-C Charging Ports

The control panel includes integrated USB and Type-C ports for convenient charging of your devices. Simply plug in your compatible device to begin charging.

4.4 Anti-Collision System

The desk is equipped with an anti-collision system that detects obstacles during height adjustment. If an obstacle is encountered, the desk will automatically stop and reverse slightly to prevent damage or injury. Always ensure the area around the desk is clear during operation.

Figure 5: Quiet operation of the BANTI Electric Standing Desk, less than 50 dB.

5. Maintenance

Proper maintenance ensures the longevity and optimal performance of your BANTI Electric Standing Desk.

5.1 Cleaning the Glass Desktop

The whole-piece glass desktop is designed for easy cleaning.

• Use a soft, damp cloth with a mild glass cleaner or water to wipe the surface.
• Avoid abrasive cleaners or scouring pads, which can scratch the glass.
• Immediately wipe up any spills to prevent stains or damage.
• The glass surface can also be used as a writing table with dry-erase markers. Clean thoroughly after use.

Figure 6: Features of the high-quality glass desktop: water-resistant, easy to clean, and suitable for writing.

5.2 General Care

• Regularly check all screws and connections to ensure they are tight. Retighten if necessary.
• Keep the desk away from direct sunlight and extreme temperatures to prevent material degradation.
• Avoid placing heavy or sharp objects directly on the desktop without protection to prevent scratches or cracks.

6. Troubleshooting

If you encounter any issues with your BANTI Electric Standing Desk, refer to the following common problems and solutions.

If the problem persists after attempting these solutions, please contact BANTI customer support for further assistance.

7. Product Specifications

Figure 7: Detailed desk dimensions.

Figure 8: Load capacity and lifting durability of the BANTI Electric Standing Desk.

8. Warranty & Support

8.1 Warranty Information

The BANTI Electric Standing Desk comes with a Limited Warranty. Please refer to your purchase documentation or contact BANTI customer support for specific terms and conditions regarding warranty coverage.

Optional protection plans may be available for extended coverage. Check with your retailer for details.

8.2 Customer Support

BANTI is committed to providing friendly technical support and assistance. If you have any questions regarding assembly, operation, maintenance, or troubleshooting that are not covered in this manual, please do not hesitate to contact us.

For support, please visit the official BANTI store or contact their customer service through the platform where you purchased the product. You can also visit the BANTI Store on Amazon for more information and contact options.