Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your JASIWAY Convertible Sleeper Chair Bed. Designed for versatility and comfort, this 3-in-1 furniture piece functions as a chair, chaise lounge, and a sleeper bed, making it ideal for small spaces, bedrooms, offices, and apartments. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
Important Safety Information
- The maximum weight capacity for this product is 300 pounds. Do not exceed this limit.
- Ensure the product is used on hard, level floors only to maintain stability and prevent tipping.
- Exercise caution when adjusting the backrest and converting the chair to prevent pinching or injury. Keep hands and fingers clear of moving parts.
- Keep children and pets away from the product during assembly and adjustment.
- Regularly inspect all bolts and connections to ensure they remain tight.
Package Contents
Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Convertible Sleeper Chair Frame
- Cushions (Seat and Backrest)
- Throw Pillow(s) (Quantity: 2)
- Rubberwood Legs (4 pieces)
- Armrests (2 pieces)
- Hardware Pack (screws, washers, Allen wrench)
- Washable Armrest Covers
Setup and Assembly
Assembly is straightforward and typically requires one person. Follow these steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Legs: Locate the four rubberwood legs. Screw each leg securely into the designated threaded holes on the bottom of the chair frame. Ensure they are tightened firmly.
Image: Close-up view of the sturdy wooden legs attached to the base of the chair, designed to protect floors.
- Install Armrests: Attach the armrests to both sides of the chair frame using the provided hardware. Ensure they are aligned correctly and fastened tightly. Place the washable armrest covers over the armrests.
Image: The chair in its sofa configuration, highlighting the wooden armrests and included throw pillows.
- Position Throw Pillows: Place the included throw pillows on the chair for added comfort and lumbar support.
Your JASIWAY Convertible Sleeper Chair Bed is now ready for use.
Operating Instructions
The JASIWAY Convertible Sleeper Chair Bed offers three primary configurations and an adjustable backrest for optimal comfort.
Converting Between Modes (Chair, Chaise, Bed)
This product can be easily transformed between a sofa chair, a chaise lounge, and a sleeper bed. The transformation mechanism involves extending the seat section and adjusting the backrest.
Image: A composite image illustrating the three functional modes: sofa chair, chaise lounge, and full sleeper bed.
- Sofa Chair Mode: In this mode, the seat is compact, and the backrest is upright. This is the standard seating position.
- Chaise Lounge Mode: To convert to a chaise lounge, gently pull the front section of the seat outwards. The hidden support legs will extend. Adjust the backrest to your desired reclining angle.
Image: The chair extended into a chaise lounge, suitable for relaxing or reading.
- Sleeper Bed Mode: To fully convert to a bed, extend the seat section completely until it lies flat. The backrest should also be lowered to a flat position. Ensure all support legs are properly extended and stable.
Image: The chair fully transformed into a comfortable sleeper bed, ideal for guests.
Adjusting the Backrest (5 Positions)
The backrest can be adjusted to 5 different angles, ranging from 0° (flat) to 85° (upright). To adjust:
- Gently push the backrest forward until you hear a click.
- Slowly recline the backrest to the desired angle. It will lock into place at each of the five preset positions.
- To return to an upright position, push the backrest fully forward until it clicks, then release it to allow it to recline to the lowest position, and then lift it to the desired upright angle.
Image: Visual representation of the backrest's 5 adjustable positions, from upright to fully reclined.
Maintenance
Proper care will extend the life and appearance of your convertible sleeper chair.
- Cleaning: Wipe clean with a dry cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Armrest Covers: The washable armrest covers can be removed and cleaned according to their care instructions (typically machine wash cold, gentle cycle).
- Inspection: Periodically check all screws and connections to ensure they are tight. Retighten if necessary.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels unstable or wobbly. | Legs are not tightened properly or uneven floor surface. | Ensure all four legs are securely screwed in. Move the chair to a level surface. |
| Difficulty adjusting the backrest. | Mechanism might be stiff or not fully engaged. | Push the backrest fully forward until it clicks, then recline slowly. Ensure no obstructions. |
| Chair does not convert smoothly to bed/chaise. | Obstruction or mechanism not fully extended. | Check for any objects blocking the movement. Ensure the seat section is pulled out completely. |
| Product feels too firm. | The product is designed with a firm foam fill. | Consider adding a mattress topper or additional padding for personal comfort preferences. |
Specifications
| Feature | Detail |
|---|---|
| Brand | JASIWAY |
| Model | 43.3" W Sleeper Chair |
| Product Dimensions (Chair) | 30.1"D x 43.29"W x 31.9"H |
| Reclined Length (Bed) | 78.7 Inches |
| Seat Depth | 20.9 Inches |
| Seat Height | 17.1 Inches |
| Weight Limit | 300 Pounds |
| Item Weight | 32.8 Kilograms |
| Material Type | Cotton Linen Fabric |
| Frame Material | Metal |
| Furniture Leg Material | Wood (Rubberwood) |
| Fill Material | High Density Foam |
| Adjustable Positions | 5 (0° to 85° backrest angle) |
| Assembly Required | Yes |
| Color | Modern Beige |
Note: All dimensions are approximate and may vary slightly.
Image: Diagram illustrating the dimensions of the chair in its upright position, including width, depth, and height.
Image: The chair fully transformed into a comfortable sleeper bed, showing its extended length.
Warranty and Support
This JASIWAY product comes with a Limited Warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your purchase or visit the official JASIWAY website.
For technical support, missing parts, or any inquiries regarding your product, please contact JASIWAY customer service:
- Website: Visit the JASIWAY Store on Amazon
- Email: Refer to your purchase documentation for direct email support.
- Phone: Refer to your purchase documentation for direct phone support.
Please have your model number (43.3" W Sleeper Chair) and purchase date available when contacting support.
