Introduction
Thank you for choosing the luckystyle Dimmable Floor Standing Tall Lamp. This manual provides essential information for the safe and efficient use of your new lamp. Please read these instructions carefully before assembly and operation, and retain them for future reference.
Safety Instructions
- Ensure the power supply is disconnected before assembly, disassembly, or cleaning.
- This lamp is designed for indoor use only. Do not expose to water or high humidity.
- Use only the specified E26 LED bulb (12W max) or an equivalent.
- Do not attempt to modify the lamp's electrical components.
- Keep the lamp away from flammable materials.
- Ensure the base is stable on a flat surface to prevent tipping.
Package Contents
Verify that all components are present before beginning assembly:
- Remote Control
- 12W E26 LED Bulb
- Linen Lampshade
- Pole Sections
- Heavy Duty Base
Figure 1: Included Components
Setup and Assembly
Follow these steps to assemble your floor lamp:
- Assemble the Pole: Carefully screw all pole sections together from top to bottom until secure.
- Attach to Base: Insert the assembled pole into the heavy-duty base and tighten securely.
- Install the Bulb: Screw the provided 12W E26 LED bulb into the lamp socket.
- Attach the Lampshade: Place the linen lampshade over the socket. Secure it by screwing the socket ring onto the socket, holding the lampshade in place.
- Connect Power: Plug the UL certified power cord into a standard electrical outlet.
Figure 2: Assembly Steps
Operating Instructions
Your luckystyle floor lamp can be controlled via the included remote control or the foot switch.
Remote Control Functions
The remote control allows for comprehensive adjustment of the lamp's settings. Ensure the foot switch is in the 'on' position for remote control functionality.
Figure 3: Remote Control and Foot Switch
- Power Button: Turns the lamp on or off.
- Brightness Adjustment: Use the '+' and '-' buttons to adjust brightness from 5% to 100%.
- Color Temperature Adjustment: Cycle through color temperatures (3000K Warm Light, 4000K Cool White, 5000K White Daylight, 6000K Cool White, 6500K Daylight) using the dedicated buttons or fine-tune with '+' and '-' for color temperature.
- Night Light Mode: Activates a soft, low-brightness setting (3000K, 10% brightness) for a comfortable atmosphere.
- Timer Function: Set the lamp to automatically turn off after 30 minutes or 1 hour.
Figure 4: Color Temperature Options
Foot Switch Operation
The integrated foot switch provides a convenient way to turn the lamp on and off. Press the switch once to turn on, and again to turn off.
Maintenance
Cleaning
To clean the lamp, ensure it is unplugged from the power outlet. Use a soft, dry cloth to wipe down the pole and base. For the lampshade, a lint roller or a slightly damp cloth can be used to remove dust. Avoid using abrasive cleaners or solvents.
Bulb Replacement
The lamp uses an E26 base LED bulb. If the bulb needs replacement, ensure the lamp is unplugged and the bulb has cooled down. Unscrew the old bulb and replace it with a new E26 LED bulb (maximum 12W). The manufacturer offers replacement bulbs; contact customer support for details.
Figure 5: Bulb Replacement Information
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, loose bulb, foot switch off. | Check power outlet, ensure bulb is screwed in tightly, press foot switch to 'on'. |
| Remote control not working. | Dead batteries, foot switch off, remote out of range. | Replace remote batteries (2 AAA required), ensure foot switch is 'on', operate remote within 50ft. |
| Light flickers or is dim. | Loose bulb, faulty bulb, power fluctuation. | Tighten bulb, replace bulb, check power source. |
| Lampshade is unstable. | Socket ring not tightened. | Ensure the socket ring is fully tightened to secure the lampshade. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | LK-F3-RF |
| Dimensions | 9.5"D x 6.7"W x 63"H |
| Item Weight | 3.85 pounds |
| Material | Metal |
| Finish Type | Matte |
| Bulb Type | 12W E26 LED (Included) |
| Brightness | 5% - 100% Dimmable (1200 Lumen max) |
| Color Temperature | 3000K - 6500K (Adjustable) |
| Control Method | Remote Control, Foot Switch |
| Cable Length | 50 Feet |
| Power Source | Corded Electric |
| Remote Batteries | 2 AAA batteries (not included) |
| Indoor/Outdoor Usage | Indoor |
Warranty and Support
The luckystyle Dimmable Floor Standing Tall Lamp is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please contact luckystyle customer service through the retailer where the product was purchased or visit the official luckystyle website. Please have your model number (LK-F3-RF) and purchase information ready when contacting support.
