JARXIOKE 3000W Pure Sine Wave Power Inverter User Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your JARXIOKE 3000W Pure Sine Wave Power Inverter. This device converts 12V DC battery power into 110V/120V AC household electricity, suitable for various applications including RVs, off-grid solar systems, and vehicles. Please read this manual thoroughly before installation and use, and retain it for future reference.

Image 1.1: The JARXIOKE 3000W Pure Sine Wave Power Inverter, showing the main unit, wireless remote, and battery connection cables.

2. Safety Instructions

• Ventilation: Ensure adequate ventilation around the inverter. Do not block cooling vents.
• Environment: Install the inverter in a dry, cool, and dust-free environment. Avoid direct sunlight, heat sources, and flammable materials.
• Water Exposure: Do not expose the inverter to water or moisture.
• Connections: Ensure all DC and AC connections are tight and correct to prevent sparks and overheating.
• Grounding: Properly ground the inverter to prevent electrical shock.
• Battery Safety: Work in a well-ventilated area when connecting to batteries. Wear eye protection. Avoid short-circuiting battery terminals.
• Load Capacity: Do not exceed the inverter's continuous power rating (3000W) or peak power rating (6000W).
• Children: Keep the inverter out of reach of children.
• Maintenance: Only qualified personnel should perform maintenance or repairs.

3. Package Contents

Upon opening your JARXIOKE 3000W Pure Sine Wave Power Inverter package, you should find the following items:

• JARXIOKE 3000W 12V Pure Sine Wave Power Inverter
• Battery Connection Cables (Red for positive, Black for negative)
• Wireless Remote Control
• User Manual
• Wrench

Image 3.1: Illustration of the included items: the inverter, battery cables, wireless remote control, and a wrench.

4. Product Overview

4.1 Front and Rear Panel Features

Familiarize yourself with the various ports and controls on your inverter:

Image 4.1: Detailed view of the inverter's front and rear panels, indicating the positive and negative DC terminals, cooling fans, LCD display, power switch, Type-C port, USB ports, AC sockets, and earth wire connection.

• DC Positive Terminal (Red): Connects to the positive terminal of your 12V battery.
• DC Negative Terminal (Black): Connects to the negative terminal of your 12V battery.
• Cooling Fans: Automatically activate to dissipate heat when the internal temperature rises or load increases.
• LCD Display: Shows real-time operational status (voltage, output, wattage, protection indicators).
• Power Switch: Toggles the inverter's main power.
• Type-C Port: For charging compatible devices.
• USB Ports (x2): For charging USB-powered devices.
• AC Sockets (x3): Standard 110V/120V AC outlets for connecting appliances.
• Earth Wire Connection: For grounding the inverter.

4.2 LCD Display Features

The LCD display provides critical information about the inverter's status and any active protection features:

Image 4.2: The LCD display illustrating indicators for overvoltage, overload, and short circuit protection, along with real-time voltage, output, frequency, and wattage readings.

• Battery Indicator: Shows the current battery charge level.
• Input Voltage (VDC): Displays the DC input voltage from the battery.
• Output Voltage (VAC): Shows the AC output voltage.
• Output Frequency (Hz): Indicates the AC output frequency (60Hz).
• Output Wattage (W): Displays the real-time power consumption of connected devices.
• Protection Indicators: Alerts for conditions such as overvoltage, low voltage, overload, short circuit, and overheat.

4.3 Cooling System

The inverter is equipped with intelligent cooling fans to maintain optimal operating temperature and prevent overheating.

Image 4.3: An exploded view of the inverter highlighting the two large, silent smart cooling fans designed for efficient heat dissipation.

• The fans operate quietly and activate only when the internal temperature reaches approximately 45°C or when the load capacity exceeds 2800W.
• This smart cooling mechanism helps extend the inverter's lifespan and ensures stable performance.

5. Setup & Installation

5.1 Connecting to a 12V Battery

Follow these steps to safely connect your inverter to a 12V DC power source:

1. Ensure the inverter's power switch is in the 'OFF' position.
2. Connect the red battery cable to the positive (+) terminal of your 12V battery.
3. Connect the other end of the red cable to the positive (red) terminal on the inverter. Tighten securely.
4. Connect the black battery cable to the negative (-) terminal of your 12V battery.
5. Connect the other end of the black cable to the negative (black) terminal on the inverter. Tighten securely.
6. Ensure all connections are firm to prevent loose contacts, which can cause sparks or overheating.

5.2 Mounting the Inverter

For optimal performance and safety, the inverter should be installed horizontally. This allows for proper airflow and heat dissipation. Ensure the mounting surface is stable and can support the weight of the inverter.

6. Operating Instructions

6.1 Powering On/Off

1. To Power On: After connecting the inverter to the battery, press the main power switch to the 'ON' position. The LCD display will illuminate, showing operational data.
2. To Power Off: Press the main power switch to the 'OFF' position. The LCD display will turn off.

6.2 Using AC Outlets, USB, and Type-C Ports

• Once the inverter is powered on, you can plug your AC appliances into the three standard AC sockets.
• Connect your USB-powered devices to the dual USB ports or the Type-C port for charging. These ports are live whenever the inverter is connected to a battery, even if the main AC output is off, allowing for convenient charging without activating the full inverter.

6.3 Wireless Remote Control

The included wireless remote control allows you to conveniently turn the inverter on or off from a distance of up to 100 meters.

• Important: Before using the remote control to turn on the inverter, ensure the main power switch on the inverter itself is in the 'OFF' position.
• Press the 'ON' button on the remote to activate the inverter.
• Press the 'OFF' button on the remote to deactivate the inverter.
• The remote uses an A23 size battery (not included).

6.4 Typical Applications

The JARXIOKE 3000W Pure Sine Wave Power Inverter is suitable for powering a wide range of sensitive electronics and appliances:

Image 6.1: Visual examples of common devices compatible with the pure sine wave inverter, such as power tools, kitchen appliances, and personal electronics.

• Power tools (e.g., chainsaws, electric drills)
• Kitchen appliances (e.g., electric ovens, coffee machines)
• Personal electronics (e.g., tablets, laptops, phones)
• Water pumps and other motor-driven equipment

7. Maintenance

• Regular Cleaning: Keep the inverter's exterior clean and free of dust. Use a dry cloth.
• Ventilation: Periodically check that the cooling vents are clear of obstructions.
• Connections: Ensure battery cables and AC connections remain tight. Loose connections can lead to power loss or damage.
• Storage: If storing the inverter for an extended period, disconnect it from the battery and store it in a cool, dry place.

8. Troubleshooting

9. Specifications

10. Warranty & Support

JARXIOKE provides a 24-month warranty for each order of this product. This warranty covers manufacturing defects and ensures product reliability.

For any questions, technical assistance, or warranty claims, please contact JARXIOKE customer support via email. Refer to the contact information provided with your purchase documentation or visit the official JARXIOKE website for support details.