Instructions for novopal models including: Pure Sine Wave 2000 Watt Car Power Inverter Converter DC 12V to 120V AC

六、连接

Installation Manual (PDF)

Pure Sine Wave 2000Watt Car Power Inverter Converter DC 12V to 120V AC with Remote Control and LCD Display 1 AC Terminal Block 2 AC Outlets 2x2.4A USB Ports for RV Truck Boat by VOLTWORKS (12VBlue) : Automotive

5000Watt Heavy Duty Modified Sine Wave Power Inverter DC 12volt to AC 120volt with LCD Display 4 AC Sockets Dual USB Ports & Remote Control for Truck RV and Emergency 5000W Power Inverter

‎PM-5000QBR User Guide (PDF) Giandel ‎GIANDEL 5000Watt,Heavy,Duty,Modified,Sine,Wave,Power,Inverter,DC,12volt,to,AC,120volt,with,LCD,Display,4,AC,Sockets,Dual,USB,Ports,&,Remote,Control,for,Truck,RV,and,Emergency,B07HT28DJV,B07MMB23LS,B08ZK8C99Y,B07T8F1DP1,B07H3JCG2Y

Modified Sine Wave Power Inverter 3000 Watt DC12 Volt to AC 120 Volt with Remote Control and LED Display Dual AC Outlets & USB Port for RV Truck Boat by GIANDEL 3000W

‎PM-3000KAR User Guide (PDF) Giandel ‎GIANDEL Modified,Sine,Wave,Power,Inverter,3000,Watt,DC12,Volt,to,AC,120,Volt,with,Remote,Control,and,LED,Display,Dual,AC,Outlets,&,USB,Port,for,RV,Truck,Boat,by,GIANDEL,B07J3C3BLM,B07SJYR5G7,B07JP7GCZW

61V7yMs-pBL
How to Ground an Inverter ?
Grounding
The power inverter has a terminal on the back panel marked "Grounding" or " ". This is used to connect the chassis of the power inverter to the ground. The ground terminal has already connected to the ground wire of AC output receptacle through the internal connecting wire. The ground terminal must be connected to the ground wire, which will vary depending on where the power inverter is installed. 1  In some fixed Connect the ground terminal to the earth available position

A.Connect to household metal water pipes, metal frames (door

frames, window frames) connected to the earth

B.Connect to the nails on the wall or ground which contact to

2Indoor conditions the earth

C.Connect to the grounding system of the mains grid which is

connected to the ground wire of the socket (Note: this

3Outdoor conditions
4In a Vehicle,boat or ship

connection must be operated by a professional electrician)
Connect one end of earth wire to the inverter grounding terminal,the other end to the nail and insert to the earth. Connect to the chassis of vehicle or grounding system of boatship.

Warning:
 To make sure the firmness of the connection. The ground wire must be 14AWG ( 2.08mm2 ) or even larger  Do not operate the power inverter without connecting to ground. Electric shock hazard may result.


WPS 文字