Ketive Rabbit Hutch Instruction Manual

1. Introduction

Thank you for choosing the Ketive Rabbit Hutch. This manual provides essential information for the safe assembly, operation, and maintenance of your new pet enclosure. Please read these instructions carefully before assembly and retain them for future reference.

2. Safety Instructions

• Ensure all parts are securely fastened before placing pets inside the hutch.
• Regularly inspect the hutch for any damage or loose components that could harm your pet.
• Place the hutch on a stable, level surface to prevent tipping.
• While the hutch features a waterproof roof, prolonged exposure to extreme weather conditions should be avoided.
• Keep small children supervised when near the hutch and pets.
• This hutch is designed for small animals such as rabbits, guinea pigs, hamsters, ferrets, and squirrels. Do not use for animals larger than intended.

3. Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Wooden panels (various sizes for walls, roof, doors, and floor)
• Wire mesh panels
• Anti-slip ramp
• Pull-out tray
• Hardware kit (screws, hinges, latches, etc.)
• Assembly instructions
• Small brush and dustpan for cleaning

Figure 1: All components of the Ketive Rabbit Hutch laid out before assembly. This includes various wooden panels, wire mesh sections, the pull-out tray, and a bag of hardware.

4. Assembly Instructions

Assembly typically takes approximately 25 minutes. Follow the numbered steps provided in the included instruction booklet. Ensure all screws are tightened appropriately, but do not overtighten to avoid damaging the wood.

1. Prepare the Base: Assemble the bottom frame of the hutch, ensuring it is stable.
2. Attach Side Panels: Securely attach the side wooden panels and wire mesh panels to the base.
3. Install Upper Structure: Assemble the upper house structure, including the roof panels.
4. Insert Pull-Out Tray: Slide the deep pull-out tray into its designated slot.
5. Attach Doors and Ramp: Install all doors using the provided hinges and latches. Position the anti-slip ramp to connect the upper and lower levels.
6. Final Check: Verify that all connections are secure and the hutch is stable before introducing your pets.

Figure 2: The hutch features an expandable design. Two or more hutches can be combined by simply removing the side panel of each unit to create a larger living space for your pets.

5. Features

• Durable Solid Fir Wood Construction: Crafted from natural fir wood, this hutch is designed for longevity. Anti-bite strips are included along the ramp to resist wear from pets.
• Two-Story Design: Provides ample space for exploration and a secure, elevated resting area.
• Waterproof Asphalt Roof: The roof is designed to protect pets from rain and sun, making it suitable for both indoor and outdoor use.
• Deep Pull-Out Tray: An easily removable, deeper tray simplifies cleaning and helps maintain hygiene. The tray locks securely to prevent accidental movement.
• Clear Acrylic Windows: Allows for easy observation of your pets without disturbing them, while also providing natural light to the living area.
• Multiple Access Doors: Features three access doors for convenient interaction with your pets and easier cleaning.

Figure 3: Key features of the hutch include a non-slip ramp for easy access between levels, a durable waterproof asphalt roof for weather protection, and clear acrylic windows for visibility and light.

Figure 4: The hutch features a deep, leak-proof pull-out tray for easy cleaning. Multiple access doors also facilitate interaction and maintenance.

Figure 5: The hutch is constructed from 100% natural fir wood, known for its durability and visible wood texture, offering a superior quality compared to thin plywood alternatives.

6. Care and Maintenance

• Daily Cleaning: Remove the pull-out tray daily to dispose of waste. Use the provided brush and dustpan for easy cleanup.
• Weekly Cleaning: Wipe down all surfaces with a pet-safe cleaner. Ensure the hutch is completely dry before returning pets.
• Wood Care: The natural fir wood is treated for durability. To prolong its life, consider applying a pet-safe wood sealant annually, especially if used outdoors.
• Roof Maintenance: Periodically check the asphalt roof for any signs of wear or damage to ensure it remains waterproof.

7. Troubleshooting

• Hutch Instability: Ensure all screws are tightened. If on uneven ground, place shims under the legs to stabilize.
• Tray Sticking: Clean the tray and its runners regularly to prevent debris buildup. A small amount of pet-safe lubricant can be applied to the runners if needed.
• Chewing: The hutch includes anti-bite strips. If excessive chewing occurs on other parts, provide alternative chew toys for your pet.
• Water Leakage: Check the asphalt roof for cracks or gaps. Apply a suitable sealant if necessary. Ensure the hutch is not placed in an area prone to standing water.

8. Specifications

9. Warranty and Support

For warranty information or customer support, please refer to the contact details provided at the point of purchase or visit the official Ketive website. Keep your purchase receipt as proof of purchase.