Makartt Builder Nail Gel 5-in-1 Multifunctional Clear Gel User Manual

1. Introduction

The Makartt Builder Nail Gel is a versatile 5-in-1 product designed for various nail art applications. This clear gel can function as a gel nail polish, base coat, reinforcement gel, rhinestone gel, and is suitable for nail extensions, broken nail repair, building nail apex, and as a protective overlay for natural nails. Its self-leveling properties and moderate thickness facilitate ease of use for both beginners and experienced users. This bundle also includes components for 3D painting and chrome nail powder application.

Image 1.1: Makartt Builder Nail Gel bottle and its product packaging.

2. Safety Precautions

• For Professional Use Only: This product is intended for use by trained nail technicians or individuals familiar with gel nail application.
• Skin Contact: Avoid direct contact with skin. If contact occurs, wash thoroughly with soap and water.
• Ventilation: Use in a well-ventilated area to minimize inhalation of fumes.
• Eye Contact: In case of eye contact, flush immediately with plenty of water and seek medical advice.
• Keep Out of Reach: Store out of reach of children.
• Patch Test: Perform a patch test on a small area of skin 24 hours before full application to check for allergic reactions. Discontinue use if irritation occurs.
• Flammability: Keep away from heat and open flame.

3. Product Components

This bundle typically includes:

• Makartt Builder Nail Gel (Clear, 15ml)
• Micro 3D Sculpting Gel / Painting Gel
• Chrome Nail Powder

4. Preparation

Proper nail preparation is crucial for optimal adhesion and longevity of the gel.

1. Clean Nails: Ensure nails are clean, dry, and free of any oils or previous polish.
2. File and Shape: File nails to the desired shape.
3. Push Cuticles: Gently push back cuticles.
4. Buff Nail Surface: Lightly buff the natural nail surface to remove shine and create a porous surface for better adhesion.
5. Dehydrate: Apply a nail dehydrator or cleanser to remove any remaining dust and oils.

5. Application Instructions

The Makartt Builder Nail Gel offers multiple application methods:

5.1. As a Clear Gel Nail Polish

1. After preparation, apply a thin, even layer of the Builder Nail Gel to the nail surface.
2. Cure under a UV/LED lamp (refer to Curing Times section).
3. Apply a second thin layer if desired and cure.
4. Finish with a top coat and cure.

5.2. As a Base Coat

1. After preparation, apply a thin layer of the Builder Nail Gel to the nail.
2. Cure under a UV/LED lamp.
3. Proceed with your chosen color gel polish application.

Image 5.1: Demonstrations of Builder Nail Gel as a base coat, for adhering nail decorations, and for mixing with colored gel polish or glitter.

5.3. For Nail Reinforcement and Protection

1. After preparation, apply a slightly thicker layer of Builder Nail Gel to the natural nail, ensuring even coverage.
2. If desired, gently float the gel to create a slight apex for added strength.
3. Cure under a UV/LED lamp.
4. Apply a top coat and cure.

5.4. For Nail Extension and Apex Building

1. After preparation, apply a nail form securely under the free edge of the natural nail.
2. Apply a thin layer of Builder Nail Gel as a base and cure.
3. Apply a bead of Builder Nail Gel to the nail, extending it onto the form to create the desired length and shape. Build the apex for strength.
4. Cure under a UV/LED lamp.
5. Remove the nail form and gently file and shape the extended nail.
6. Apply a top coat and cure.

5.5. For Broken Nail Repair

1. Clean and prepare the broken nail area.
2. Apply a small amount of Builder Nail Gel over the break, ensuring it covers and reinforces the damaged area.
3. Shape the gel to blend with the natural nail.
4. Cure under a UV/LED lamp.
5. Gently file and buff the repaired area for a smooth finish.
6. Apply a top coat and cure.

Image 5.2: Visual guide demonstrating the Builder Nail Gel's application for nail extension, building a nail apex, nail protection/reinforcement, and repairing broken nails.

5.6. Using 3D Painting Gel

The transparent micro 3D painting gel allows for creative nail art designs.

1. Apply a base color gel and cure.
2. Dispense a small amount of 3D Painting Gel onto a palette.
3. Optional: Mix with various color gel nail polishes to create custom colored 3D designs.
4. Using a fine nail art brush, create desired patterns, lines, or 3D sculptures on the nail surface. The gel's strong ductility allows for smooth, complete lines.
5. Cure under a UV/LED lamp.
6. Apply a top coat and cure.

Image 5.3: Illustration of transparent painting gel being mixed with different color gels to create intricate nail art designs like flowers and leaves.

Image 5.4: A nail art brush applying the painting gel, highlighting its strong ductility for creating smooth and precise lines without sticking to the brush.

5.7. Applying Chrome Nail Powder

Achieve mesmerizing and futuristic nail art designs by combining with chrome nail powder.

1. Apply a base color gel and cure.
2. Apply a no-wipe top coat and cure for the recommended time (usually 30-60 seconds LED, 60-120 seconds UV), ensuring it's fully cured but still has a slight tacky feel for powder adhesion.
3. Using an applicator or silicone tool, pick up a small amount of chrome nail powder.
4. Rub the powder onto the cured no-wipe top coat until a smooth, reflective chrome effect is achieved.
5. Brush off any excess powder.
6. Apply a final layer of no-wipe top coat to seal the chrome effect and cure.

Image 5.5: Example of nail art created using chrome nail powder, showcasing bright and charming designs.

5.8. Curing Times

• LED Lamp: 90-120 seconds
• UV Lamp: 2-3 minutes

Note: Curing times may vary based on lamp wattage and gel thickness. Ensure full cure to prevent lifting or allergic reactions.

6. Removal

To remove the Builder Nail Gel:

1. File Top Coat: Gently file off the top coat and any thick layers of the builder gel using a coarse grit file (e.g., 100/180 grit). Be careful not to file into the natural nail.
2. Soak: Soak cotton pads in acetone, place them on each nail, and wrap with aluminum foil.
3. Wait: Allow nails to soak for 10-15 minutes.
4. Scrape: Gently push off the softened gel with a cuticle pusher. Do not force it. If necessary, re-soak for a few more minutes.
5. Buff: Lightly buff any remaining residue from the natural nail.
6. Hydrate: Apply cuticle oil to rehydrate the nails and cuticles.

7. Maintenance and Longevity

The Makartt Builder Nail Gel is designed for strong, durable, and long-lasting wear, typically exceeding 4 weeks when applied correctly.

• Proper Application: Ensure thorough nail preparation and correct application techniques to prevent lifting or chipping.
• Avoid Harsh Chemicals: Wear gloves when performing household chores involving strong cleaning agents.
• Regular Fills: For extensions, schedule regular fills every 2-3 weeks to maintain strength and appearance as your natural nails grow.
• Moisturize: Keep cuticles and nails hydrated with cuticle oil to promote nail health.

Image 7.1: Visual representation of the gel's durability, showing minimal cracking, lifting, or peeling over a period of 1 to 28 days.

8. Troubleshooting

• Gel Not Curing: Ensure your UV/LED lamp is functioning correctly and has sufficient wattage. Apply thinner layers of gel. Check curing times.
• Lifting/Chipping: Improper nail preparation (not buffing enough, oils on nail), applying gel too thick, or not capping the free edge can cause lifting. Ensure full cure.
• Bubbles in Gel: Avoid over-mixing or shaking the gel bottle. Apply gel smoothly without excessive brushing.
• Allergic Reaction: Discontinue use immediately. Consult a medical professional. Ensure proper ventilation and avoid skin contact during application.

9. Specifications

10. Customer Support

For further assistance, product inquiries, or support, please refer to the official Makartt website or contact their customer service department. You may also refer to your purchase platform for seller contact information.

• Makartt Official Website: Visit Makartt Store on Amazon