Introduction
This manual provides detailed instructions for the Hasbro Transformers: Legacy Evolution G2 Universe Laser Cycle Deluxe Class action figure. This figure transforms between robot mode and motorcycle mode. Please read these instructions carefully before use to ensure proper handling and transformation.
Safety Information: This product contains small parts and is not suitable for children under 3 years of age due to choking hazards. Recommended for ages 8+.
Setup and Initial Inspection
Upon opening the package, carefully remove the G2 Universe Laser Cycle figure and any included accessories. Inspect the figure for any visible damage or missing parts. The figure comes pre-assembled in robot mode.
Image: G2 Universe Laser Cycle in robot mode, showcasing its white, black, yellow, and green color scheme with a black helmet and green visor.
Image: Detailed view of the G2 Universe Laser Cycle robot mode's head and chest, highlighting the green visor and chest details.
Ensure all joints move freely but are firm enough to hold poses. Some parts, such as the front wheel and front paneling, may be packaged loose and need to be attached during transformation. Refer to the transformation steps for proper attachment.
Transformation Instructions
The G2 Universe Laser Cycle transforms between robot mode and motorcycle mode. Follow these steps carefully to avoid damage to the figure.
Transforming from Robot Mode to Motorcycle Mode
- Prepare the Robot: Ensure the figure is in its standard robot mode. Detach any accessories if they hinder transformation.
- Fold Legs: Carefully fold the robot's legs and feet to form the rear section of the motorcycle. Ensure all panels align.
- Position Arms: Manipulate the robot's arms and shoulders to form the front and side fairings of the motorcycle.
- Head Concealment: Tuck the robot's head into the body cavity, typically under the front fairing.
- Attach Front Wheel Assembly: The front wheel and associated fairing components are often separate or require careful manipulation to form the front of the motorcycle. Align and secure these parts.
- Secure Panels: Ensure all panels and tabs are securely connected to form a cohesive motorcycle mode. Pay close attention to alignment, as some connections may require precise positioning.
Image: G2 Universe Laser Cycle in motorcycle mode, displaying its sleek white, yellow, and green design with a clear windshield.
Transforming from Motorcycle Mode to Robot Mode
- Disengage Panels: Carefully unclip and unfold the motorcycle panels that form the robot's arms and legs.
- Extend Legs: Extend the robot's legs and feet from the rear section of the motorcycle.
- Form Arms: Unfold and position the robot's arms from the front and side fairings.
- Reveal Head: Bring out the robot's head from its concealed position.
- Final Adjustments: Adjust all joints and panels to achieve the desired robot pose. Ensure all parts are securely locked into place.
Image: Back of the G2 Universe Laser Cycle packaging, showing the figure in both robot and motorcycle modes, along with multilingual warnings and product details.
Care and Maintenance
- Cleaning: To clean the figure, gently wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the figure away from direct sunlight and extreme temperatures to prevent discoloration or material degradation.
- Handling: Handle the figure with care during transformation. Avoid excessive force, especially on small or thin parts, to prevent breakage.
- Joints: If joints become loose over time, they can sometimes be tightened with a small amount of clear nail polish or a specialized joint-tightening fluid, applied sparingly and allowed to dry completely.
Troubleshooting
- Difficulty Transforming: If the figure is difficult to transform, ensure you are following the steps in the correct order. Sometimes, parts need to be aligned precisely before they can tab into place. Do not force parts.
- Parts Not Tabbing Securely: Check for any obstructions or misalignments. Ensure all tabs and slots are clean. Sometimes, a slight adjustment in the angle or pressure can help parts connect.
- Loose Parts: If a part feels excessively loose, refer to the "Care and Maintenance" section for tips on tightening joints. If a part consistently detaches, inspect for manufacturing defects.
- Missing or Damaged Parts: If you discover missing or damaged parts upon unboxing, contact Hasbro customer support immediately.
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Hasbro |
| Model Name | G2 Universe Laser Cycle Deluxe Class |
| Model Number | F7512 |
| Toy Figure Type | Action Figure |
| Character | Transformer |
| Scale | Deluxe Class |
| Figure Height | 5.51 inches (approximately 14 cm) |
| Material | Plastic |
| Recommended Age | 8 years and up (Manufacturer's stated range: 6 months to 156 months) |
| Item Weight | 0.07 kg |
| Item Dimensions | 3.94 x 1.97 x 0.5 inches |
| Included Components | Plastic figure |
Warranty Information
This product is covered by a 2-year manufacturer's warranty. This warranty typically covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or normal wear and tear.
For warranty claims or further details, please retain your proof of purchase and contact Hasbro customer support.
Customer Support
If you have any questions, require assistance, or need to report an issue with your G2 Universe Laser Cycle figure, please contact Hasbro customer support.
- Manufacturer: Hasbro
- Website: www.hasbro.com/en-us/customer-service (Please visit the official Hasbro website for the most current contact information and support options.)
- Phone: Refer to the Hasbro website for regional contact numbers.
When contacting support, please have your product model number (F7512) and proof of purchase readily available.