Calypso Digital Men's Watch K5836 Flash Time Instruction Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Calypso Digital Men's Watch, Model K5836 Flash Time. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch. Keep this manual for future reference.

Product Overview

The Calypso K5836 Flash Time digital watch is designed for modern and active lifestyles, offering a range of useful functions. It features a durable rubber strap and is water-resistant up to 5 ATM.

Key Features:

• Digital Time Display (12/24 hour format)
• Date and Calendar Function
• Chronograph (Stopwatch)
• Alarm Function
• Dual Time Zone Display
• Backlight for low-light conditions
• Water Resistance: 5 ATM (50 meters)
• Durable Rubber Strap

Watch Components:

Familiarize yourself with the buttons and display areas of your watch:

Image 1: Front view of the Calypso K5836 Flash Time digital watch. The display shows time, date, and day of the week. Buttons are visible on the sides: 'LIGHT' (top left), 'MODE' (bottom left), 'START' (top right), 'RESET' (bottom right).

• LIGHT Button (Top Left): Activates the backlight.
• MODE Button (Bottom Left): Cycles through different modes (Time, Chronograph, Alarm, Dual Time) and enters setting mode when held.
• START Button (Top Right): Starts/stops the chronograph, adjusts values in setting mode.
• RESET Button (Bottom Right): Resets the chronograph, selects items in setting mode.

Setup and Time Setting

Initial Activation:

Your watch may arrive in a power-saving mode. Press any button to activate the display.

Setting Time and Date:

1. In normal time display mode, press and hold the MODE button until the seconds begin to flash. This indicates you are in setting mode.
2. Press the RESET button to cycle through the settings: Seconds → Hours → Minutes → Year → Month → Day → 12/24 Hour Format.
3. Use the START button to adjust the flashing value.
4. Once all settings are correct, press the MODE button again to exit setting mode and return to normal time display.

Operating Modes

Cycling Through Modes:

Press the MODE button repeatedly to cycle through the following functions:

• Normal Time Display
• Chronograph (Stopwatch)
• Alarm Setting
• Dual Time Display

Chronograph (Stopwatch):

1. From normal time display, press MODE once to enter Chronograph mode. The display will show "CHRONO" or similar.
2. Press START to begin timing.
3. Press START again to pause timing.
4. Press RESET to resume timing from the paused point.
5. To stop and reset the chronograph, press START to stop, then RESET to clear the time to zero.

Alarm Setting:

1. From normal time display, press MODE twice to enter Alarm mode. The display will show "ALARM" or "AL".
2. Press and hold the START button until the alarm hours begin to flash.
3. Press RESET to select between hours and minutes.
4. Use the START button to adjust the flashing value.
5. Once the desired alarm time is set, press MODE to confirm and exit setting mode.
6. To turn the alarm ON/OFF, in Alarm mode, press the START button once. An alarm icon will appear/disappear on the display.

Dual Time:

1. From normal time display, press MODE three times to enter Dual Time mode. The display will show "DUAL" or "T2".
2. Press and hold the START button until the hours begin to flash.
3. Press RESET to select between hours and minutes.
4. Use the START button to adjust the flashing value.
5. Once the second time zone is set, press MODE to confirm and exit setting mode.

Backlight:

Press the LIGHT button (top left) to illuminate the display for a few seconds in low-light conditions.

Maintenance

Water Resistance (5 ATM):

Your Calypso K5836 watch is water-resistant up to 5 ATM (50 meters). This means it is suitable for everyday use, splashes, rain, and short periods of recreational swimming. Do not press any buttons while the watch is wet or submerged. Avoid exposure to hot water, steam, or extreme temperature changes, as this can compromise the water seals.

Battery Replacement:

When the display becomes dim or the watch stops functioning, the battery may need replacement. Battery replacement should be performed by a qualified watch technician to ensure the water resistance is maintained. Attempting to replace the battery yourself may void the warranty and damage the watch.

Cleaning:

To clean your watch, wipe it gently with a soft, damp cloth. For the rubber strap, mild soap and water can be used, then rinse thoroughly and dry. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish or strap.

Troubleshooting

Specifications

Warranty and Support

Your Calypso K5836 Flash Time watch comes with a limited warranty. For specific details regarding the warranty period and coverage, please refer to the warranty card included with your purchase or contact the retailer. For technical support, repairs, or any questions not covered in this manual, please contact Calypso customer service or an authorized service center.

You can find more information and contact details on the official Calypso website: www.calypso-watch.com