NEEWER MB-N11 Vertical Battery Grip Instruction Manual
Compatible with Nikon Z6 II and Z7 II Cameras
1. Introduction
Thank you for choosing the NEEWER MB-N11 Vertical Battery Grip. This accessory is designed to enhance your photography experience with Nikon Z6 II and Z7 II cameras by providing extended battery life and improved ergonomics for vertical shooting. Please read this manual carefully to ensure proper installation and operation.
Figure 1.1: The NEEWER MB-N11 Vertical Battery Grip attached to a Nikon Z series camera, showcasing its integrated design and comfortable grip.
2. Product Features
- Extended Battery Life: Accommodates one or two EN-EL15c batteries (backward compatible with EN-EL15b, EN-EL15a, and EN-EL15) for prolonged shooting sessions.
- Vertical Shooting Controls: Features a dedicated shutter release, main command dial, sub-command dial, AF-ON button, and Fn button for comfortable and intuitive vertical operation.
- USB-C Charging: Allows in-grip charging of EN-EL15c and EN-EL15b batteries via a USB Type-C cable (not included). Note: EN-EL15a and EN-EL15 batteries do not support in-grip charging.
- Hot-Swappable Batteries: When two batteries are installed, batteries can be replaced without powering off the camera, ensuring uninterrupted shooting.
- Tripod Mount: Integrated 1/4" tripod socket for easy mounting on tripods, monopods, or other support systems.
Figure 2.1: Detailed overview of the NEEWER MB-N11 Battery Grip's components, including the shutter release, command dials, AF-ON button, battery compartment, and charging port.
3. Setup and Installation
Follow these steps to correctly install the NEEWER MB-N11 Battery Grip onto your Nikon Z6 II or Z7 II camera:
- Prepare the Camera: Ensure your camera is powered off. Open the camera's battery chamber cover and remove the camera battery.
- Remove Battery Chamber Cover: The battery grip includes a slot to store the camera's original battery chamber cover. Carefully detach the battery chamber cover from your camera and insert it into the designated slot on the battery grip to prevent loss.
- Insert Batteries into Grip: Open the battery tray on the MB-N11 grip. Insert one or two compatible EN-EL15 series batteries into the tray, ensuring correct polarity. Close the battery tray securely.
- Attach Grip to Camera: Align the battery grip with the camera's battery chamber. Insert the grip's electrical contacts into the camera's battery slot.
- Secure the Grip: Use the mounting screw on the battery grip to firmly attach it to the camera's tripod socket. Turn the locking dial until the grip is securely fastened.
Figure 3.1: Step-by-step visual instructions for attaching the battery grip to the camera, including battery removal, cover storage, and secure mounting.
Video 3.1: A demonstration of installing the MB-N11 battery grip onto a Nikon Z6 II/Z7 II camera, showing the process of removing the camera's battery door, inserting the battery tray, and securing the grip.
4. Operating Instructions
The MB-N11 battery grip replicates essential camera controls for seamless vertical shooting.
4.1 Vertical Shooting
When shooting in portrait orientation, use the dedicated controls on the grip:
- Shutter Release: Press the shutter release button on the grip to take photos.
- Command Dials: Use the main and sub-command dials on the grip to adjust camera settings (e.g., aperture, shutter speed) as you would with the camera's built-in dials.
- AF-ON Button: Activate autofocus using the AF-ON button on the grip.
- Fn Button & Multi-Selector: Utilize the Fn button and multi-selector for quick access to custom functions or menu navigation.
Figure 4.1: Illustrates the ergonomic advantage of the battery grip for both horizontal and vertical shooting, highlighting the comfortable hand position for portrait orientation.
4.2 Battery Management
- Battery Indicator: The grip features a battery indicator to show the power status of the installed batteries.
- In-Grip Charging: Connect a USB Type-C cable (not included) to the grip's charging port to charge EN-EL15c or EN-EL15b batteries while they are inside the grip.
- Hot-Swapping: If two batteries are installed, you can remove and replace one battery without interrupting camera operation. This is ideal for continuous shooting or video recording.
Figure 4.2: Visual representation of how to charge compatible batteries directly within the grip using a USB Type-C connection, with an indicator for charging status.
5. Maintenance
To ensure the longevity and optimal performance of your NEEWER MB-N11 Battery Grip, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the grip. For electrical contacts, use a clean, lint-free cloth, possibly slightly dampened with isopropyl alcohol, to remove any dirt or residue. Ensure contacts are dry before use.
- Storage: When not in use for extended periods, remove batteries from the grip and store them separately. Store the grip in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Impact: Protect the grip from drops and impacts, which can damage internal components or external housing.
Figure 5.1: Close-up views of the grip's copper electrical contacts, 1/4" screw hole, and convenient locking dial, emphasizing the quality materials and design for durability and functionality.
6. Troubleshooting
If you encounter any issues with your battery grip, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Grip not powering camera | Batteries incorrectly inserted or depleted; poor contact with camera; grip not securely attached. | Check battery polarity and charge level. Ensure grip is firmly attached and electrical contacts are clean. |
| Vertical controls unresponsive | Lock switch engaged; poor electrical connection. | Ensure the lock switch on the grip is in the 'ON' position. Re-attach the grip to ensure a secure connection. |
| Batteries not charging in grip | Incompatible battery type; faulty USB-C cable or power source. | Verify batteries are EN-EL15c or EN-EL15b. Try a different USB-C cable and power adapter. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 10102583 |
| Compatibility | Nikon Z6 II, Nikon Z7 II |
| Battery Type | 1 or 2 EN-EL15c/EN-EL15b/EN-EL15a/EN-EL15 batteries (not included) |
| Charging Port | USB Type-C (for EN-EL15c/EN-EL15b only) |
| Vertical Controls | Shutter Release, Main Dial, Sub-Dial, AF-ON Button, Fn Button, Multi-Selector |
| Tripod Socket | 1/4"-20 Thread |
| Product Dimensions | 3 x 5.5 x 3 inches |
| Item Weight | 13.1 ounces |
8. Warranty and Support
NEEWER products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official NEEWER website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
