Introduction
Thank you for choosing the LIVARNO Home Solar LED Outdoor Garden Figurine Lamp. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new solar decorative light. Please read this manual thoroughly before use and retain it for future reference.
Safety Instructions
- Ensure the product is placed on a stable, level surface to prevent tipping.
- This product is designed for outdoor use and is splash-proof (IP44). Do not immerse it in water.
- Do not attempt to open or modify the product. There are no user-serviceable parts inside, and tampering may void the warranty and pose safety risks.
- Keep away from open flames or extreme heat sources.
- The integrated LED is not replaceable. Do not attempt to replace it.
- The Ni-MH battery is integrated and not user-replaceable.
- Dispose of the product and its battery responsibly at the end of its lifespan, following local regulations for electronic waste.
Product Overview
The LIVARNO Home Solar LED Outdoor Garden Figurine Lamp is a decorative lighting solution for your garden, patio, or balcony. It features a charming house figurine design, hand-painted from weather-resistant artificial stone. An integrated solar panel charges the internal battery during the day, and an energy-saving LED emits a warm white light automatically at dusk.

Figure 1: Front view of the solar LED garden figurine. This image shows the detailed hand-painted artificial stone house, featuring a purple roof, a blue door, and two colorful birds (one blue, one yellow) perched on either side. The windows and door are visible, but the light is off.

Figure 2: Front view of the solar LED garden figurine with the light on. This image is similar to Figure 1 but shows the warm white LED light glowing from within the house, illuminating the windows and door, creating an ambient effect.

Figure 3: Rear view of the solar LED garden figurine. This image highlights the back of the figurine, specifically showing the black rectangular solar panel integrated into the purple roof, which is responsible for charging the internal battery.
Key Features:
- Hand-painted artificial stone, weather-resistant.
- Energy-saving warm white LED light.
- Automatic illumination at dusk.
- Manual deactivation option.
- Splash-proof (IP44).
- Integrated Ni-MH battery.
Setup
- Unpacking: Carefully remove the figurine from its packaging. Inspect for any damage.
- Initial Charge: Before first use, place the figurine in direct sunlight for at least 8-12 hours to allow the internal battery to fully charge. Ensure the solar panel (located on the roof) is clean and unobstructed.
- Placement: Choose a location in your garden, patio, or balcony that receives ample direct sunlight throughout the day. Optimal performance depends on sufficient solar charging. Avoid placing it under trees, eaves, or in shaded areas.
- Activate: Locate the ON/OFF switch, usually near the solar panel or at the base of the figurine. Switch it to the "ON" position. The light will then automatically activate at dusk.
Operating
The LIVARNO Home Solar LED Figurine is designed for simple, automatic operation:
- Automatic Operation: Once the switch is in the "ON" position and the battery is charged, the light sensor will detect the onset of darkness and automatically illuminate the LED.
- Lighting Duration: With optimal charging during the day, the light can illuminate for approximately 8 hours after dark.
- Manual Deactivation: To turn off the light manually, simply switch the ON/OFF switch to the "OFF" position. This is useful if you do not wish for the light to come on automatically on a particular night.
Maintenance
To ensure the longevity and optimal performance of your solar figurine, follow these simple maintenance guidelines:
- Cleaning: Periodically wipe the solar panel and the figurine with a soft, damp cloth to remove dust, dirt, and debris. A clean solar panel ensures efficient charging. Do not use abrasive cleaners or solvents.
- Winter Care: While the product is weather-resistant, in regions with harsh winters (heavy snow, prolonged freezing temperatures), it is advisable to bring the figurine indoors to protect it and extend its lifespan.
- Battery: The integrated Ni-MH battery and LED are not designed to be replaced by the user. If the light stops functioning after prolonged use and proper charging, the product may have reached the end of its operational life.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. |
|
|
| Light is dim or only stays on for a short period. |
|
|
Specifications
| Brand | Crivit |
| Model Number | ABC001 (also ZHT563) |
| Color | Multicolor |
| Dimensions (L x W x H) | 12 x 17 x 20 cm (approx. 4.7 x 6.7 x 7.9 inches) |
| Material | Resin (Artificial Stone) |
| Light Source | Energy-saving LED (Warm White, Non-replaceable) |
| Battery Type | Ni-MH (Integrated, Non-replaceable) |
| Protection Rating | IP44 (Splash-proof) |
| Lighting Duration | Approx. 8 hours (with optimal charge) |
| Energy Class | A to G |
Warranty and Support
Warranty information for this product is typically provided at the point of purchase or within the product packaging. Please refer to your sales receipt or the documentation included with your figurine for details regarding warranty coverage and duration.
For technical support or inquiries regarding spare parts, please contact the retailer or manufacturer directly. Information regarding spare parts availability is not provided in this manual.
Note: As per product specifications, the LED and Ni-MH battery are not user-replaceable components.





