1. Introduction
Thank you for choosing the KEERCIGA S760 Space Heater. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new heater. Please read it thoroughly before use and retain it for future reference.
Package Contents:
- 1 x KEERCIGA S760 PTC Space Heater
- 1 x Remote Control (Batteries not included)
- 1 x User Manual
2. Important Safety Instructions
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using this heater.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug the heater when not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped, or damaged in any manner. Return heater to authorized service facility for examination, electrical or mechanical adjustment, or repair.
- Do not use outdoors.
- This heater is not intended for use in bathrooms, laundry areas, and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater includes an overheat protection system that shuts off the unit if it overheats. If this occurs, unplug the heater, wait 30 minutes for it to cool down, and then plug it back in.
3. Product Overview
Familiarize yourself with the components of your KEERCIGA S760 Space Heater.
Image: Front view of the KEERCIGA S760 Space Heater. The heater is black with a silver top panel. A circular digital display on the top shows '95.0' (likely temperature). The main body features a honeycomb-patterned grille covering the heating elements.
Key Components:
- Digital Display: Shows current temperature, timer settings, and oscillation status.
- Control Panel: Located on the top, with touch-sensitive buttons for operation.
- Air Outlet Grille: Front grille where heated air is expelled.
- Air Intake: Located at the rear (not visible in image) for drawing in air.
- Stable Base: Provides stability for the tower design.
4. Setup
- Unpack: Carefully remove the heater and all accessories from the packaging. Retain packaging for storage.
- Placement: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the heater to allow for proper airflow and to prevent fire hazards. Do not place it near curtains, furniture, or other obstructions.
- Power Connection: Ensure the heater is in the OFF position. Plug the power cord directly into a 220-240V AC, 50Hz grounded wall outlet. Do not use extension cords or power strips.
5. Operating Instructions
Your KEERCIGA S760 heater can be operated using the control panel on the unit or the included remote control.
Control Panel Buttons:
- Power Button (⏻): Turns the heater ON or OFF.
- Mode Button (M): Cycles through heating modes (e.g., High, Low, ECO).
- Temperature Up/Down (⬆/⬇): Adjusts the desired temperature setting.
- Oscillation Button (↻): Activates or deactivates the oscillation function.
- Timer Button (⏱): Sets the auto-off timer.
Remote Control:
The remote control duplicates the functions of the control panel. Insert 2 x AAA batteries (not included) into the remote control before first use, ensuring correct polarity.
Basic Operation:
- Power On: Press the Power button (⏻) on the control panel or remote. The digital display will illuminate.
- Set Temperature: Use the Temperature Up (⬆) or Down (⬇) buttons to select your desired room temperature. The heater will cycle ON/OFF to maintain this temperature.
- Activate Oscillation: Press the Oscillation button (↻) to start the heater rotating from side to side. Press again to stop oscillation.
- Set Timer: Press the Timer button (⏱) repeatedly to set the desired operating time (e.g., 1-12 hours). The heater will automatically turn off after the set time expires.
- Power Off: Press the Power button (⏻) again to turn off the heater. The fan may continue to run for a few seconds to cool down the heating elements before shutting off completely.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
Cleaning:
- Always unplug the heater and allow it to cool completely before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents.
- Use a vacuum cleaner with a brush attachment to remove dust from the air intake and outlet grilles.
- Never immerse the heater in water or allow water to drip into the interior.
Storage:
If storing the heater for an extended period, unplug it, clean it thoroughly, and store it in its original packaging in a cool, dry place.
7. Troubleshooting
If you experience issues with your heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power, power switch off, overheat protection activated. | Check power cord connection. Ensure power switch is ON. Unplug, wait 30 minutes, then plug back in. Check household circuit breaker. |
| Heater is on but no heat. | Temperature setting too low, ECO mode active. | Increase the desired temperature setting. Check if the heater is in ECO mode and adjust if necessary. |
| Oscillation not working. | Oscillation function not activated. | Press the Oscillation button (↻) to activate. |
| Heater shuts off unexpectedly. | Overheat protection activated, tip-over switch activated. | Unplug, wait 30 minutes, then plug back in. Ensure heater is on a stable, level surface. Clear any obstructions around the heater. |
8. Specifications
- Brand: KEERCIGA
- Model: S760
- Type: PTC Space Heater
- Special Features: Digital Display, Overheat Protection, Portable, Oscillation, Timer, Remote Control
- Form Factor: Tower
- Mounting Type: Floor Mount
- Product Dimensions: 18.29 x 18.29 x 42.19 cm (approx. 7.2 x 7.2 x 16.6 inches)
- Color: Black
- Power Source: Corded Electric (Voltage and Wattage typically found on product label)
9. Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or contact KEERCIGA customer service through the retailer where the product was purchased. Please have your model number (S760) and purchase date available when contacting support.
