YAREMYEYE 24V 5A Lead-Acid Battery Charger User Manual

Introduction

This manual provides essential instructions for the safe and efficient use of your YAREMYEYE 24V 5A Lead-Acid Battery Charger. Please read this manual thoroughly before operating the charger to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

Product Overview

The YAREMYEYE 24V 5A Lead-Acid Battery Charger is designed to provide a reliable power source for various mobility devices equipped with lead-acid batteries. It features a Male 3-Pin XLR connector for compatibility with a wide range of scooters and power chairs.

Image: The YAREMYEYE 24V 5A Lead-Acid Battery Charger, showing its input (AC 100-240V 50/60Hz), output (DC 24V 5A), and Male 3-Pin XLR interface.

Key Features:

• Input: AC 100-240V 50/60Hz
• Output: DC 24V 5A (150W Max)
• Connector: Male 3-Pin XLR
• Faster Charging: Provides quicker charging compared to lower amperage chargers (e.g., 1A, 2A, 3A, 4A).
• LED Indicator: Red for charging, Green for fully charged or disconnected.
• Built-in Cooling Fan: Ensures optimal operating temperature.
• Multi-Protection Features: Includes Over-Voltage Protection (OVP), Over-Current Protection (OCP), Overload Protection, Short-Circuit Protection, Over-Temperature Protection, and Short-Battery Protection.

Image: A close-up view of the 3-Pin XLR Male Connector, highlighting its design for secure connection.

Image: An illustration showing the charger with its built-in cooling fan, indicating active heat dissipation.

Image: Icons representing the multi-protection features of the charger, including Over-Temp, Short-Circuit, Short-Battery, Over-Current, and Over-Voltage protection.

Setup

1. Verify Compatibility: Before connecting, ensure that your device's battery requires a 24V 5A lead-acid charger with a Male 3-Pin XLR connector. The charger is designed exclusively for lead-acid batteries.
2. Inspect Charger: Check the charger and its cables for any signs of damage. Do not use a damaged charger.
3. Prepare Environment: Ensure the charging area is well-ventilated, dry, and free from flammable materials.
4. Connect to Battery: With the charger unplugged from the wall outlet, connect the Male 3-Pin XLR connector of the charger securely into the charging port of your mobility device. Ensure a firm connection.
5. Connect to Power: Plug the AC power cord of the charger into a standard AC 100-240V 50/60Hz wall outlet.

Operating Instructions

Charging Process:

1. Once connected to both the battery and the power outlet, the charger's LED indicator will illuminate.
2. A RED light indicates that the battery is currently charging.
3. A GREEN light indicates that the battery is fully charged or that the charger is disconnected from the battery.
4. Do not charge the battery for more than 12 hours to prevent overcharging and potential damage.
5. After charging is complete (green light), first disconnect the charger from the wall outlet, then disconnect the XLR connector from your device.

Safety Precautions

Adhering to these safety guidelines is crucial for your safety and the longevity of the charger and battery.

• Indoor Use Only: This charger is designed for indoor use. Avoid exposure to dampness, rain, or extreme temperatures.
• Battery Type: Use this charger exclusively for lead-acid batteries. Do not attempt to charge non-rechargeable batteries or other battery types.
• Ventilation: Always charge in a well-ventilated area. Do not cover the charger during operation.
• Avoid Disassembly: Do not disassemble, crush, puncture, or short external contacts of the charger. There are no user-serviceable parts inside. Opening the casing may expose you to high voltage.
• Professional Service: If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• Connection Order: Always connect the charger to the battery first, then to the power outlet. Disconnect from the power outlet first, then from the battery.
• Dry Hands and Plugs: Ensure your hands and all plugs are dry before handling the charger or making connections.
• Charging Duration: Do not exceed 12 hours of charging time per cycle.
• Damaged Items: If you receive a damaged item due to shipping, do not use it to charge.
• Product Lifespan: Use the product within one year of purchase for optimal performance.

Maintenance

• Cleaning: Disconnect the charger from all power sources before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or solvents.
• Storage: Store the charger in a cool, dry place away from direct sunlight, moisture, and extreme temperatures when not in use.
• Cable Care: Avoid bending or crimping the power cord and charging cable excessively. Store cables neatly to prevent damage.

Troubleshooting

If the charger is not working after connecting to the power supply, consider the following:

1. Voltage and Current Mismatch: Ensure the charger's voltage (24V) and current (5A) match your battery's requirements. Using a charger with incorrect parameters will prevent it from working. Verify the brand and model of your electric bike or the parameters and plug type of your original charger.
2. Damaged Battery: If the battery has not been used for an extended period (e.g., more than 12 months or 2-3 months), it might be damaged and unable to accept a charge. The charger will not function if the battery is faulty.
3. Loose Connection: If the green light appears when the charger is plugged into the power supply, but the LED does not turn red after connecting to the battery, the connector might be loose or have poor contact. Re-insert the plug firmly to ensure good contact.
4. Internal Short Circuit in Device: If the green light appears when plugged into the power supply, but then goes out after connecting to the electric bicycle, it may indicate an internal short circuit within the electric bicycle. The charger's self-protection function will activate. In this case, have your e-bike battery or device checked and replaced if necessary.

Specifications

Image: Diagram illustrating the physical dimensions of the AC adapter and the total length of the cables.

Compatible Devices

This 24V 5A Lead-Acid Battery Charger is compatible with a wide range of mobility scooters and power chairs that use a Male 3-Pin XLR connector. Compatible models include, but are not limited to:

• ActiveCare: Catalina, Medalist, Osprey 4410, Pilot 2310, Pilot 2410, Renegade, Wildcat, Prowler 3310, Prowler 3410
• Pride Mobility: Revo, EA1065 replacement
• Rascal: 301PC, 318PC, 320PC, 710PC, 200T, 500T, 314, 326, 326A, 24BC5000TF-1
• Drive Medical: Cirrus Plus EC Folding Power Chair (CPN)
• Golden Technologies: Alero, Alante, Alante HD, Golden Compass, Avenger
• Shoprider: Sovereign (ES4)
• Jazzy Power Chair: 614, 614HD, 1107, Select, Select 6, Select 6 Ultra, 1121, 1121 HD
• Pacesaver: Plus III
• Bladez XTR: SE, Street, Street II, Comp, Comp II
• GT: GT200, GT250, GT300, GT350, GT500, KOBRA.08, ASTEROID, mini-e, SHOCKWAVE, TRAILZ, TSUNAMI
• IZIP: CHOPPER, I250, I300, I350, I500
• LASHOUT: 400W, 600W, Electric Bike
• Mongoose: IMPACT, M150, M200, M250, M300, M350, M500, Z350, COSMIC, FUSION, HORNET FS, mini-e, ROCKET FS
• Other: S150, S180, S200, S250, S300, S350, S500, X-CEL, Zone 5, Four/4 wheel mobility scooters

Image: The charger displayed alongside several types of mobility scooters and power chairs it is compatible with.

Support

If you have any questions about this charger or encounter any issues during use, please contact the seller or manufacturer for assistance. They are committed to providing a satisfactory reply within 24 hours for both pre-sale and after-sale inquiries.