Product Overview
This manual provides instructions for the Remington Replacement Stand, designed for use with specific Remington shaver models. This stand is intended to replace an original stand and requires your existing power cord for operation.
Image 1: Remington Replacement Stand. This image shows the compact design of the replacement stand, ready to hold a shaver.
Compatibility
The Remington Replacement Stand is compatible with the following shaver models:
- XR1330
- XR1340
- XR1350
- XR1370
- XR1390
- XR1430
- XR1450
- XR1470
- WR5100
Important: This stand is designed for use with your existing power cord. A power cord is not included with the replacement stand.
Identifying Your Shaver Model Number
Before ordering replacement parts, it is essential to correctly identify your Remington shaver's model number to ensure compatibility. The model number can be found in various locations depending on the shaver model and age.
Common Locations for Model Number:
- Front of the Shaver: On some older models, the model number may be clearly printed on the front.
- Back of the Shaver: Many models have the model number imprinted on the back. This text can sometimes be small or difficult to read, potentially requiring a magnifying glass.
- Underside of the Trimmer: For certain models, the model number is located on the underside of the shaver's trimmer attachment.
Model numbers typically follow a format of one or two letters followed by numbers (e.g., F5800, RXXXX, XRXXXX).
Video 1: How to Identify Your Shaver TYPE Number. This video demonstrates various locations where the model number can be found on Remington shavers, including the front, back, and under the trimmer, to assist in correct part identification.
Setup
- Unpack: Carefully remove the replacement stand from its packaging.
- Locate Power Cord: Identify your existing Remington shaver power cord. This stand does not include a new power cord.
- Connect Power Cord: Insert the power cord's charging pin into the designated port on the replacement stand.
- Place Shaver: Gently place your compatible Remington shaver onto the stand, ensuring it seats correctly and makes proper contact with the charging terminals.
- Connect to Power: Plug the power cord into a suitable electrical outlet.
The shaver should begin charging if it is properly connected and the power cord is functional.
Operating Instructions
The replacement stand functions as a charging and storage base for your Remington shaver. No specific operational steps are required for the stand itself beyond proper setup.
- Charging: Place the shaver on the stand to initiate charging. Refer to your shaver's original manual for specific charging indicators and times.
- Storage: When not in use, store your shaver on the stand to keep it upright and ready for its next use.
Maintenance
To ensure the longevity and proper function of your replacement stand:
- Cleaning: Wipe the stand periodically with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or immerse the stand in water.
- Avoid Damage: Handle the stand with care. Avoid dropping it or placing heavy objects on it.
- Storage Environment: Store the stand in a dry environment, away from direct sunlight and extreme temperatures.
Troubleshooting
Shaver Not Charging on Stand:
- Check Compatibility: Verify that your shaver model is listed as compatible with this stand.
- Secure Connection: Ensure the power cord is firmly connected to both the stand and the electrical outlet.
- Shaver Placement: Make sure the shaver is correctly seated on the stand, with its charging contacts aligned.
- Power Cord Functionality: Test your power cord with another compatible device if possible, or inspect it for any visible damage. A faulty power cord will prevent charging.
- Electrical Outlet: Confirm the electrical outlet is functional by plugging in another appliance.
Stand Appears Damaged:
- Discontinue use immediately if the stand shows signs of physical damage, especially to electrical components.
Specifications
| Brand | Remington |
| Item Model Number | 00286 |
| Manufacturer | Remington |
| Package Dimensions | 2 x 1.6 x 1.5 inches |
| Item Weight | 3.2 ounces |
Warranty and Support
Information regarding specific warranty terms or direct customer support contacts for this replacement stand is not available in the provided product data. Please refer to the original product packaging or the official Remington website for warranty details and customer service information.
