FEELSO Filtered Handheld Shower Head Model 72020 User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your FEELSO Filtered Handheld Shower Head, Model 72020. This product is designed to enhance your showering experience by filtering water and offering multiple spray modes.

FEELSO Filtered Handheld Shower Head with internal filter layers visible and water spraying out.

Image 1.1: The FEELSO Filtered Handheld Shower Head, showcasing its internal 15-stage filtration system and water output.

2. Product Features

15-Stage Filtration System: Equipped with KDF, calcium sulfite, activated carbon, vitamin C, ceramic balls, and other media to reduce chlorine, heavy metals (lead, mercury, nickel, chromium), and other impurities.
Three Spray Modes: Offers Rainfall, Massage, and Mix modes for varied showering preferences.
High Pressure Design: Engineered to provide a dense and powerful water flow, even in low water pressure environments.
Durable Construction: Made from chrome-plated high-quality ABS material for durability and leak prevention.
Easy Installation: Universal G1/2" threads allow for quick connection to standard shower arms without professional plumbing assistance.

Diagram showing three spray modes: Rainfall, Massage, and Mix, with a close-up of the one-click switch button.

Image 2.1: Visual representation of the three distinct spray modes and the integrated one-click switch for selection.

Detailed diagram illustrating the 15 layers of filtration media within the shower head filter cartridge.

Image 2.2: An exploded view detailing each of the 15 filtration stages, including PP cotton, KDF, and mineral balls.

3. Package Contents

Verify that all components are present before beginning installation:

FEELSO 3 Settings Shower Head
15 Stages Filter Cartridge (pre-installed or separate)
Angle-adjustable Bracket
60 Inch Stainless Steel Hose
Spare Washer
Additional Teflon Tape
Complete Installation Instructions (this manual)

4. Installation Guide

No plumber is needed for installation. Follow these steps to set up your new shower head:

Prepare the Area: Ensure the main water supply to your shower is turned off. Remove your existing shower head and clean any residue from the shower arm threads.
Apply Teflon Tape: Wrap the included Teflon tape clockwise around the threads of your shower arm 3-5 times.
Install the Bracket: Screw the angle-adjustable bracket onto the shower arm. Hand-tighten first, then use a wrench if necessary, being careful not to overtighten.
Connect the Hose: Attach one end of the 60-inch stainless steel hose to the bracket and the other end to the handheld shower head. Ensure washers are properly seated in both connections. Hand-tighten securely.
Place Shower Head: Insert the handheld shower head into the bracket.
Test for Leaks: Turn on the main water supply and check all connections for leaks. If leaks occur, tighten connections slightly or reapply Teflon tape.

Diagram showing the shower bracket components including a washer filter, solid brass swivel ball joint, and illustrating 360-degree adjustable angle.

Image 4.1: Components of the angle-adjustable bracket, highlighting the washer filter and swivel ball joint for flexible positioning.

Image of the 60-inch stainless steel shower hose, emphasizing its anti-leakage and durable construction.

Image 4.2: The stainless steel hose, designed for durability and to prevent leaks.

5. Operation Instructions

Your FEELSO shower head offers three distinct spray modes:

Rainfall Mode: Provides a gentle, full-coverage spray for a relaxing experience.
Massage Mode: Features a concentrated, powerful stream to help relieve muscle tension.
Mix Mode: Combines elements of rainfall and massage for a balanced spray.

To switch between modes, simply press the button located on the shower head handle.

Close-up of the shower head with the one-click switch button and illustrations of Rainfall, Massage, and Mix spray patterns.

Image 5.1: The one-click switch allows easy selection of the desired spray mode.

6. Filter Maintenance

The 15-stage filter cartridge requires periodic replacement to maintain optimal water purification performance. Replace the filter every 4-6 months, depending on your local water conditions and usage frequency.

Replacing the Filter Cartridge:

Turn off the water supply to the shower.
Unscrew the shower head handle from the main shower head body.
Carefully remove the old filter cartridge.
Insert a new 15-stage filter cartridge into the handle, ensuring it is seated correctly.
Screw the shower head handle back onto the body until secure.
Turn on the water supply and check for leaks.

Diagram showing the steps to replace the filter cartridge in the handheld shower head.

Image 6.1: Step-by-step visual guide for replacing the internal filter cartridge.

7. Troubleshooting

Low Water Pressure: Ensure the filter cartridge is not clogged. If recently replaced, check for proper installation. Verify that the main water supply valve is fully open.
Leaks from Connections: Turn off water, re-tighten connections, and ensure Teflon tape is properly applied. Check that washers are correctly seated and not damaged.
Shower Head Clogging: The anti-clogging silicone nozzles can be cleaned by gently rubbing them to dislodge mineral deposits.

8. Specifications

Specification	Detail
Brand	FEELSO
Model Number	72020
Material	Stainless Steel, Top Quality ABS
Finish Type	Brushed Nickel
Product Dimensions	11"L x 4.7"W
Number of Settings	3 (Rainfall, Massage, Mix)
Hose Length	60 Inches
Item Weight	1.61 pounds
Installation Type	Wall Mounted
Efficiency	1.8 GPM

9. Warranty and Support

FEELSO is committed to providing high-quality products and customer satisfaction. This product comes with a 1-year warranty.

For any questions, concerns, or support needs regarding your FEELSO Filtered Handheld Shower Head, please contact our customer service team. We aim to provide assistance within 24 hours.

Customer Service Email: sales05@feelsolife.com

FEELSO 72020