JIGOO J300 Bed Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the JIGOO J300 Bed Vacuum Cleaner. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before first use and retain it for future reference.

Image: The JIGOO J300 Bed Vacuum Cleaner, showcasing its main body, transparent dust cups, and integrated digital display for dust mite index and cleaning status.

2. Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using an electrical appliance.

• Read all instructions before using the appliance.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer’s recommended attachments.
• Do not use with a damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• The UV light is designed to activate only when the vacuum is in contact with a surface. Avoid direct exposure to UV light.
• The heating function operates at 130°F (55°C). Avoid prolonged direct skin contact with the heated surface during operation.
• Do not use without dust cup and/or filters in place.

3. Product Overview

Components

• Main Unit with Handle
• Transparent Dual Dust Cups
• Integrated Digital Display
• High-Frequency Beating Brushroll
• UV-C Lamp
• Heating Element
• Power Cord (5m / 16ft)
• Filter Sponge (2 included)

Key Features

• Powerful Suction: 500W motor generating 13Kpa suction power.
• High-Frequency Beating: Main brush rotates at 13,000 times/min for deep cleaning.
• Smart Dust Recognition: Intelligent dust sensor provides a precise dust index and cleaning status on the digital display. Green light indicates cleaning completion.
• 99% Protection: Equipped with 245nm UV lights and ultrasonic technology for allergen elimination.
• High Temperature Heating: Reaches 130°F (55°C) in 5 seconds to further eliminate allergens and dehumidify. (Note: Heating function requires direct contact with the surface).
• Dual-Cup Design: Efficiently separates dust and mites from the air for outstanding filtration and enduring suction.
• Long Cord: 5m (16ft) power cable for extended reach.

Image: An overview of the JIGOO J300 highlighting its core features including 500W motor, 13000Pa suction, 13000 Rpm/min tapping, 130°F hot air drying, 16FT long cable, and 245nm UV-C wave length.

Image: A detailed diagram illustrating the innovative dual-cup design for dust and mite separation, the advanced mite sensor for real-time detection, the 12000 times/min strong vibration, 13Kpa strong suction, UV & Ultrasonic technology for 99.9% mite removal, and 55°C hot air for dehumidification.

4. Setup

The JIGOO J300 is designed for ease of use and requires minimal setup.

1. Unpack: Carefully remove the vacuum cleaner and all accessories from the packaging.
2. Inspect: Check the appliance for any signs of damage. Ensure all components listed in the 'Product Overview' section are present.
3. Filter Installation: Ensure the filter sponge and dust cups are correctly assembled and securely in place before connecting to power. The unit comes with pre-installed filters and two extra filter sponges.
4. Power Connection: Unwind the power cord and plug it into a suitable electrical outlet (120V).

5. Operating Instructions

Follow these steps for effective cleaning:

1. Power On: Once plugged in, press the power button located on the handle or main unit to turn on the vacuum cleaner. The digital display will illuminate.
2. Smart Dust Sensor: The display will show a 'Dust mite index' percentage and 'Clean status'. Red indicates a high concentration of dust/mites, while green indicates a clean area.
3. Cleaning Technique: Gently glide the vacuum cleaner back and forth over the surface you wish to clean (e.g., mattress, sofa, carpet). Do not press down excessively; the unit's weight and design are sufficient for effective cleaning.
4. UV & Ultrasonic Function: These functions activate automatically when the vacuum head is in contact with the surface, providing deep sanitization.
5. High Temperature Heating: The 130°F (55°C) heating function will activate when the vacuum head maintains direct contact with the surface. If the unit is lifted, the heating will automatically stop for safety.
6. Monitor Cleaning Status: Continue vacuuming an area until the 'Clean status' indicator on the display turns green, signifying that the area has been thoroughly cleaned.
7. Power Off: After cleaning, press the power button again to turn off the appliance, then unplug it from the electrical outlet.

Image: A close-up view of the JIGOO J300's smart display, indicating the dust mite index percentage and icons for ultrasonic, dry, sterilize, and pat functions, along with the clean status light.

Image: The JIGOO J300 vacuum cleaner positioned on a mattress, with visual cues showing the emission of 55°C hot air downwards to penetrate and dehumidify the mattress, reducing mite activity.

6. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your JIGOO J300.

Cleaning the Dust Cups and Filters

It is recommended to clean the dust cups and filters after each use, especially when the dust cups appear full.

1. Unlock Dust Cups: Press the release button to detach the dual dust cups from the main unit.
2. Empty Dust: Open the dust cup and empty its contents into a waste bin.
3. Remove Filters: Carefully remove the filter sponge and any other filter components from the dust cup assembly.
4. Clean Filters: Tap the filters gently to remove loose dust. For thorough cleaning, rinse the filter sponge under running water. Ensure it is completely dry before re-installing. Do not wash other filter components unless specified.
5. Reassemble: Once all parts are clean and dry, reassemble the filters and dust cups, ensuring they click securely into place on the main unit.

Cleaning the Brushroll

Periodically check the brushroll for tangled hair or debris.

1. Unlock Bottom Plate: Locate the release mechanism on the bottom of the vacuum head and unlock the bottom plate.
2. Remove Brushroll: Carefully lift out the brushroll.
3. Clean Brushroll: Use scissors or a brush to remove any tangled hair, threads, or debris from the brushroll.
4. Reinstall: Place the clean brushroll back into its housing and secure the bottom plate until it clicks into place.

Image: A visual guide demonstrating the four steps for easy detachment and cleaning of the JIGOO J300: 1. Click to unlock dust cups. 2. Open the cap and take out the filter and sponge. 3. Unlock the bottom plate and take out the brushroll. 4. Clean up the filter part and brushroll.

Filter Replacement

The JIGOO J300 comes with two extra filter sponges. Replace filters when they show signs of wear or if suction power noticeably decreases even after cleaning.

Storage

Store the vacuum cleaner in a cool, dry place, away from direct sunlight and out of reach of children.

7. Troubleshooting

If you encounter issues with your JIGOO J300, refer to the following table for common problems and solutions.

8. Specifications

9. Warranty and Support

JIGOO products are manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official JIGOO website. If you require technical support or have any questions regarding your JIGOO J300 Bed Vacuum Cleaner, please contact JIGOO customer service through the contact information provided on their official website or your purchase platform.

Please have your model number (J300) and purchase date ready when contacting support.